Download or read book Six Monographs on Wind Stresses written by Robins Fleming and published by . This book was released on 1915 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Six Monographs on Wind Stresses written by Robins Fleming and published by . This book was released on 1915 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Models written by Bill Addis and published by John Wiley & Sons. This book was released on 2020-09-25 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Download or read book American Book Publishing Record Cumulative 1876 1949 Non Dewey decimal classified titles written by R.R. Bowker Company. Department of Bibliography and published by . This book was released on 1980 with total page 2200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physical Models written by Bill Addis and published by John Wiley & Sons. This book was released on 2020-11-02 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical models have been, and continue to be used by engineers when faced with unprecedented challenges, when engineering science has been non-existent or inadequate, and in any other situation when the engineer has needed to raise their confidence in a design proposal to a sufficient level to begin construction. For this reason, models have mostly been used by designers and constructors of highly innovative projects, when previous experience has not been available. The book covers the history of using of physical models in the design and development of civil and building engineering projects including bridges in the mid-18th century, William Fairbairn?s Britannia bridge in the 1840s, the masonry Aswan Dam in the 1890s, concrete dams in the 1920s, thin concrete shell roofs and the dynamic behaviour of tall buildings in earthquakes from the 1930s, tidal flow in estuaries and the acoustics of concert halls from the 1950s, and cable-net and membrane structures in the 1960s. Traditionally, progress in engineering has been attributed to the creation and use of engineering science, the understanding materials properties and the development of new construction methods. The book argues that the use of reduced scale models have played an equally important part in the development of civil and building engineering. However, like the history of engineering design itself, this crucial contribution has not been widely reported or celebrated. The book concludes with reviews of the current use of physical models alongside computer models, for example, in boundary layer wind tunnels, room acoustics, seismic engineering, hydrology, and air flow in buildings.
Download or read book Coastal Construction Manual written by and published by . This book was released on 1986 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Designers Manual Fifth Edition The Steel Construction Institute written by Institute Steel Construction and published by Wiley-Blackwell. This book was released on 1993-01-18 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.
Download or read book Principles of Structural Design written by Ram S. Gupta and published by CRC Press. This book was released on 2019-06-17 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: Timber, steel, and concrete are common engineering materials used in structural design. Material choice depends upon the type of structure, availability of material, and the preference of the designer. The design practices the code requirements of each material are very different. In this updated edition, the elemental designs of individual components of each material are presented, together with theory of structures essential for the design. Numerous examples of complete structural designs have been included. A comprehensive database comprising materials properties, section properties, specifications, and design aids, has been included to make this essential reading.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Guide to Stability Design Criteria for Metal Structures written by Ronald D. Ziemian and published by John Wiley & Sons. This book was released on 2010-02-08 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to stability design criteria, fully updated and incorporating current research Representing nearly fifty years of cooperation between Wiley and the Structural Stability Research Council, the Guide to Stability Design Criteria for Metal Structures is often described as an invaluable reference for practicing structural engineers and researchers. For generations of engineers and architects, the Guide has served as the definitive work on designing steel and aluminum structures for stability. Under the editorship of Ronald Ziemian and written by SSRC task group members who are leading experts in structural stability theory and research, this Sixth Edition brings this foundational work in line with current practice and research. The Sixth Edition incorporates a decade of progress in the field since the previous edition, with new features including: Updated chapters on beams, beam-columns, bracing, plates, box girders, and curved girders. Significantly revised chapters on columns, plates, composite columns and structural systems, frame stability, and arches Fully rewritten chapters on thin-walled (cold-formed) metal structural members, stability under seismic loading, and stability analysis by finite element methods State-of-the-art coverage of many topics such as shear walls, concrete filled tubes, direct strength member design method, behavior of arches, direct analysis method, structural integrity and disproportionate collapse resistance, and inelastic seismic performance and design recommendations for various moment-resistant and braced steel frames Complete with over 350 illustrations, plus references and technical memoranda, the Guide to Stability Design Criteria for Metal Structures, Sixth Edition offers detailed guidance and background on design specifications, codes, and standards worldwide.
Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t
Download or read book Air Base Defense in the Republic of Vietnam 1961 1973 written by Roger P. Fox and published by . This book was released on 1979 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Basic Methods of Policy Analysis and Planning written by Carl Patton and published by Routledge. This book was released on 2015-08-26 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated in its 3rd edition, Basic Methods of Policy Analysis and Planning presents quickly applied methods for analyzing and resolving planning and policy issues at state, regional, and urban levels. Divided into two parts, Methods which presents quick methods in nine chapters and is organized around the steps in the policy analysis process, and Cases which presents seven policy cases, ranging in degree of complexity, the text provides readers with the resources they need for effective policy planning and analysis. Quantitative and qualitative methods are systematically combined to address policy dilemmas and urban planning problems. Readers and analysts utilizing this text gain comprehensive skills and background needed to impact public policy.
Download or read book Designing and Building with Bamboo written by Jules J. A. Janssen and published by . This book was released on 2000 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Facing the Heat Barrier written by T.A. Heppenheimer and published by Courier Dover Publications. This book was released on 2018-09-12 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume from The NASA History Series presents an overview of the science of hypersonics, the study of flight at speeds at which the physics of flows is dominated by aerodynamic heating. The survey begins during the years immediately following World War II, with the first steps in hypersonic research: the development of missile nose cones and the X-15; the earliest concepts of hypersonic propulsion; and the origin of the scramjet engine. Next, it addresses the re-entry problem, which came to the forefront during the mid-1950s, showing how work in this area supported the manned space program and contributed to the development of the orbital shuttle. Subsequent chapters explore the fading of scramjet studies and the rise of the National Aerospace Plane (NASP) program of 1985–95, which sought to lay groundwork for single-stage vehicles. The program's ultimate shortcomings — in terms of aerodynamics, propulsion, and materials — are discussed, and the book concludes with a look at hypersonics in the post-NASP era, including the development of the X-33 and X-34 launch vehicles, further uses for scramjets, and advances in fluid mechanics. Clearly, ongoing research in hypersonics has yet to reach its full potential, and readers with an interest in aeronautics and astronautics will find this book a fascinating exploration of the field's history and future.
Download or read book Construction Handbook for Bridge Temporary Works written by American Association of State Highway and Transportation Officials and published by American Association of State Highway & Transportation Officials. This book was released on 1995 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
