Download or read book Single Event Effects in Aerospace written by Edward Petersen and published by John Wiley & Sons. This book was released on 2011-11-16 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic concepts necessary to understand Single Event phenomena which could cause random performance errors and catastrophic failures to electronics devices. As miniaturization of electronics components advances, electronics components are more susceptible in the radiation environment. The book includes a discussion of the radiation environments in space and in the atmosphere, radiation rate prediction depending on the orbit to allow electronics engineers to design and select radiation tolerant components and systems, and single event prediction.
Download or read book Single Event Effects in Aerospace written by Edward Petersen and published by John Wiley & Sons. This book was released on 2011-10-04 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic concepts necessary to understand Single Event phenomena which could cause random performance errors and catastrophic failures to electronics devices. As miniaturization of electronics components advances, electronics components are more susceptible in the radiation environment. The book includes a discussion of the radiation environments in space and in the atmosphere, radiation rate prediction depending on the orbit to allow electronics engineers to design and select radiation tolerant components and systems, and single event prediction.
Download or read book Testing at the Speed of Light written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2018-06-08 with total page 89 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spacecraft depend on electronic components that must perform reliably over missions measured in years and decades. Space radiation is a primary source of degradation, reliability issues, and potentially failure for these electronic components. Although simulation and modeling are valuable for understanding the radiation risk to microelectronics, there is no substitute for testing, and an increased use of commercial-off-the- shelf parts in spacecraft may actually increase requirements for testing, as opposed to simulation and modeling. Testing at the Speed of Light evaluates the nation's current capabilities and future needs for testing the effects of space radiation on microelectronics to ensure mission success and makes recommendations on how to provide effective stewardship of the necessary radiation test infrastructure for the foreseeable future.
Download or read book Extreme Environment Electronics written by John D. Cressler and published by CRC Press. This book was released on 2017-12-19 with total page 1041 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world’s foremost experts in extreme environment electronics, the book provides in-depth information on a wide array of topics. It begins by describing the extreme conditions and then delves into a description of suitable semiconductor technologies and the modeling of devices within those technologies. It also discusses reliability issues and failure mechanisms that readers need to be aware of, as well as best practices for the design of these electronics. Continuing beyond just the "paper design" of building blocks, the book rounds out coverage of the design realization process with verification techniques and chapters on electronic packaging for extreme environments. The final set of chapters describes actual chip-level designs for applications in energy and space exploration. Requiring only a basic background in electronics, the book combines theoretical and practical aspects in each self-contained chapter. Appendices supply additional background material. With its broad coverage and depth, and the expertise of the contributing authors, this is an invaluable reference for engineers, scientists, and technical managers, as well as researchers and graduate students. A hands-on resource, it explores what is required to successfully operate electronics in the most demanding conditions.
Download or read book Integrated Circuit Design for Radiation Environments written by Stephen J. Gaul and published by John Wiley & Sons. This book was released on 2019-12-03 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to the effects of radiation on semiconductor components of electronic systems, and techniques for the designing, laying out, and testing of hardened integrated circuits This book teaches the fundamentals of radiation environments and their effects on electronic components, as well as how to design, lay out, and test cost-effective hardened semiconductor chips not only for today’s space systems but for commercial terrestrial applications as well. It provides a historical perspective, the fundamental science of radiation, and the basics of semiconductors, as well as radiation-induced failure mechanisms in semiconductor chips. Integrated Circuits Design for Radiation Environments starts by introducing readers to semiconductors and radiation environments (including space, atmospheric, and terrestrial environments) followed by circuit design and layout. The book introduces radiation effects phenomena including single-event effects, total ionizing dose damage and displacement damage) and shows how technological solutions can address both phenomena. Describes the fundamentals of radiation environments and their effects on electronic components Teaches readers how to design, lay out and test cost-effective hardened semiconductor chips for space systems and commercial terrestrial applications Covers natural and man-made radiation environments, space systems and commercial terrestrial applications Provides up-to-date coverage of state-of-the-art of radiation hardening technology in one concise volume Includes questions and answers for the reader to test their knowledge Integrated Circuits Design for Radiation Environments will appeal to researchers and product developers in the semiconductor, space, and defense industries, as well as electronic engineers in the medical field. The book is also helpful for system, layout, process, device, reliability, applications, ESD, latchup and circuit design semiconductor engineers, along with anyone involved in micro-electronics used in harsh environments.
Download or read book High Performance Silicon Imaging written by Daniel Durini and published by Woodhead Publishing. This book was released on 2019-10-19 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Performance Silicon Imaging: Fundamentals and Applications of CMOS and CCD Sensors, Second Edition, covers the fundamentals of silicon image sensors, addressing existing performance issues and current and emerging solutions. Silicon imaging is a fast growing area of the semiconductor industry. Its use in cell phone cameras is already well established, with emerging applications including web, security, automotive and digital cinema cameras. The book has been revised to reflect the latest state-of-the art developments in the field, including 3D imaging, advances in achieving lower signal noise, and new applications for consumer markets. The fundamentals section has also been expanded to include a chapter on the characterization and testing of CMOS and CCD sensors that is crucial to the success of new applications. This book is an excellent resource for both academics and engineers working in the optics, photonics, semiconductor and electronics industries. Covers the fundamentals of silicon-based image sensors and technical advances, focusing on performance issues Looks at image sensors in applications, such as mobile phones, scientific imaging, and TV broadcasting, and in automotive, consumer and biomedical applications Addresses the theory behind 3D imaging and 3D sensor development, including challenges and opportunities
Download or read book Space Physics and Aeronomy Space Weather Effects and Applications written by Anthea J. Coster and published by John Wiley & Sons. This book was released on 2021-04-27 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines how solar and terrestrial space phenomena affect sophisticated technological systems Contemporary society relies on sophisticated technologies to manage electricity distribution, communication networks, transportation safety, and myriad other systems. The successful design and operation of both ground-based and space-based systems must consider solar and terrestrial space phenomena and processes. Space Weather Effects and Applications describes the effects of space weather on various present-day technologies and explores how improved instrumentation to measure Earth's space environment can be used to more accurately forecast changes and disruptions. Volume highlights include: Damage and disruption to orbiting satellite equipment by solar particles and cosmic rays Effects of space radiation on aircraft at high altitudes and latitudes Response of radio and radar-based systems to solar bursts Disturbances to the propagation of radio waves caused by space weather How geomagnetic field changes impact ground-based systems such as pipelines Impacts of human exposure to the space radiation environment The American Geophysical Union promotes discovery in Earth and space science for the benefit of humanity. Its publications disseminate scientific knowledge and provide resources for researchers, students, and professionals. Find out more about the Space Physics and Aeronomy collection in this Q&A with the Editors in Chief
Download or read book Engineering written by Great Britain. Parliament. House of Commons. Innovation, Universities, Science and Skills Committee and published by The Stationery Office. This book was released on 2009 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporating HC 470-i-iii, 640-i-iii, 599-i-iii, 1064-i, 1202-i, 1194-i of session 2007-08
Download or read book Radiation Tolerant Electronics written by Paul Leroux and published by MDPI. This book was released on 2019-08-26 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on radiation-tolerant electronics has increased rapidly over the past few years, resulting in many interesting approaches to modeling radiation effects and designing radiation-hardened integrated circuits and embedded systems. This research is strongly driven by the growing need for radiation-hardened electronics for space applications, high-energy physics experiments such as those on the Large Hadron Collider at CERN, and many terrestrial nuclear applications including nuclear energy and nuclear safety. With the progressive scaling of integrated circuit technologies and the growing complexity of electronic systems, their susceptibility to ionizing radiation has raised many exciting challenges, which are expected to drive research in the coming decade. In this book we highlight recent breakthroughs in the study of radiation effects in advanced semiconductor devices, as well as in high-performance analog, mixed signal, RF, and digital integrated circuits. We also focus on advances in embedded radiation hardening in both FPGA and microcontroller systems and apply radiation-hardened embedded systems for cryptography and image processing, targeting space applications.
Download or read book Radiation Single Event Effects SEE Impact on Complex Avionics Architecture Reliability written by Robert F. Hodson and published by . This book was released on 2019 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Ionization and Detection in Nuclear Medicine written by Tapan K. Gupta and published by Springer Science & Business Media. This book was released on 2013-03-20 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will serve as the definitive source of detailed information on radiation, ionization, and detection in nuclear medicine. It opens by considering fundamental aspects of nuclear radiation, including dose and energy, sources, and shielding. Subsequent chapters cover the full range of relevant topics, including the detection and measurement of radiation exposure (with detailed information on mathematical modelling); medical imaging; the different types of radiation detector and their working principles; basic principles of and experimental techniques for deposition of scintillating materials; device fabrication; the optical and electrical behaviors of radiation detectors; and the instrumentation used in nuclear medicine and its application. The book will be an invaluable source of information for academia, industry, practitioners, and researchers.
Download or read book The Van Allen Probes Mission written by Nicola Fox and published by Springer Science & Business Media. This book was released on 2014-01-10 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Documents the science, the mission, the spacecraft and the instrumentation on a unique NASA mission to study the Earth’s dynamic, dangerous and fascinating Van Allen radiation belts that surround the planet This collection of articles provides broad and detailed information about NASA’s Van Allen Probes (formerly known as the Radiation Belt Storm Probes) twin-spacecraft Earth-orbiting mission. The mission has the objective of achieving predictive understanding of the dynamic, intense, energetic, dangerous, and presently unpredictable belts of energetic particles that are magnetically trapped in Earth’s space environment above the atmosphere. It documents the science of the radiation belts and the societal benefits of achieving predictive understanding. Detailed information is provided about the Van Allen Probes mission design, the spacecraft, the science investigations, and the onboard instrumentation that must all work together to make unprecedented measurements within a most unforgiving environment, the core of Earth’s most intense radiation regions. This volume is aimed at graduate students and researchers active in space science, solar-terrestrial interactions and studies of the upper atmosphere. Originally published in Space Science Reviews, Vol. 179/1-4, 2013.
Download or read book Ionizing Radiation Effects in MOS Devices and Circuits written by T. P. Ma and published by John Wiley & Sons. This book was released on 1989-04-18 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive overview describing the effects of ionizing radiation on MOS devices, as well as how to design, fabricate, and test integrated circuits intended for use in a radiation environment. Also addresses process-induced radiation effects in the fabrication of high-density circuits. Reviews the history of radiation-hard technology, providing background information for those new to the field. Includes a comprehensive review of the literature and an annotated listing of research activities in radiation-hardness research.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 2011 2nd International Congress on Computer Applications and Computational Science written by Ford Lumban Gaol and published by Springer Science & Business Media. This book was released on 2012-02-23 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest inventions in computer technology influence most of human daily activities. In the near future, there is tendency that all of aspect of human life will be dependent on computer applications. In manufacturing, robotics and automation have become vital for high quality products. In education, the model of teaching and learning is focusing more on electronic media than traditional ones. Issues related to energy savings and environment is becoming critical. Computational Science should enhance the quality of human life, not only solve their problems. Computational Science should help humans to make wise decisions by presenting choices and their possible consequences. Computational Science should help us make sense of observations, understand natural language, plan and reason with extensive background knowledge. Intelligence with wisdom is perhaps an ultimate goal for human-oriented science. This book is a compilation of some recent research findings in computer application and computational science. This book provides state-of-the-art accounts in Computer Control and Robotics, Computers in Education and Learning Technologies, Computer Networks and Data Communications, Data Mining and Data Engineering, Energy and Power Systems, Intelligent Systems and Autonomous Agents, Internet and Web Systems, Scientific Computing and Modeling, Signal, Image and Multimedia Processing, and Software Engineering.
Download or read book Formal Techniques for Safety Critical Systems written by Cyrille Artho and published by Springer. This book was released on 2014-04-05 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the Second International Workshop, FTSCS 2013, held in Queenstown, New Zealand, in October 2013. The 17 revised full papers presented together with an invited talk were carefully reviewed and selected from 32 submissions. The papers address various topics related to the application of formal and semi-formal methods to improve the quality of safety-critical computer systems.
Download or read book Early Soft Error Reliability Assessment of Convolutional Neural Networks Executing on Resource Constrained IoT Edge Devices written by Geancarlo Abich and published by Springer Nature. This book was released on 2023-01-01 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes an extensive and consistent soft error assessment of convolutional neural network (CNN) models from different domains through more than 14.8 million fault injections, considering different precision bit-width configurations, optimization parameters, and processor models. The authors also evaluate the relative performance, memory utilization, and soft error reliability trade-offs analysis of different CNN models considering a compiler-based technique w.r.t. traditional redundancy approaches.
