Download or read book Simulation of Performance of Quantum Well Infrared Photodetectors written by and published by . This book was released on 2005 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis the performance of a step quantum well infrared photodetector, designed by Kevin Lantz (June 2002) and experimentally studied by Michael Touse (September 2003) and Yeo Hwee Tiong (December 2004), was simulated in Matlab using the transfer matrix method. The results, obtained by the Matlab problem, are compared with the experimental results, in an attempt to make inferences about the optimum way of designing QWIP detectors. Simulation of the above implies numerical solution of the Schroedinger equation, using algorithms and methods, which give accurate results. In our approach, the transfer matrix method (TMM) was used with exponentials and Airy functions to represent the solutions to Schroedinger equation under zero and non-zero bias, respectively. The calculated results were compared with the experimental data and found to provide a good agreement which validated the accuracy of the model employed. In the final section of the thesis we examine and simulate in Matlab the application of the extended Kalman filtering (EKF) to an infrared photodetector as a target tracking mechanism to both maneuvering and non-maneuvering targets. When we used one sensor for tracking, the results were reliable provided that the target did not maneuver. In the case of a maneuvering target the results were significantly improved when we used both sensors for tracking.

Download or read book Simulation of Performance of Quantum Well Infrared Photocetectors written by and published by . This book was released on 2005 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis the performance of a step quantum well infrared photodetector, designed by Kevin Lantz (June 2002) and experimentally studied by Michael Touse (September 2003) and Yeo Hwee Tiong (December 2004), was simulated in Matlab using the transfer matrix method. The results obtained by the Matlab program are compared with the experimental results in a try to make inferences about the optimum way of designing QWIP detectors. Simulation of the above implies numerical solution of the Schrödinger equation, using algorithms and methods, which give accurate results. In our approach, the transfer matrix method is used with exponential and, Airy functions to represent the solutions to Schrödinger equation under zero and nonzero bias, respectively. In the final section of the thesis we examine and simulate in Matlab the application of the extended Kalman filtering (EKF) to an infrared photodetector as a target tracking mechanism to both maneuvering and non-maneuvering targets.

Download or read book Quantum Well Infrared Photodetectors written by Harald Schneider and published by Springer. This book was released on 2006-10-18 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addressed to both students as a learning text and scientists/engineers as a reference, this book discusses the physics and applications of quantum-well infrared photodetectors (QWIPs). It is assumed that the reader has a basic background in quantum mechanics, solid-state physics, and semiconductor devices. To make this book as widely accessible as possible, the treatment and presentation of the materials is simple and straightforward. The topics for the book were chosen by the following criteria: they must be well-established and understood; and they should have been, or potentially will be, used in practical applications. The monograph discusses most aspects relevant for the field but omits, at the same time, detailed discussions of specialized topics such as the valence-band quantum wells.

Download or read book Modeling and Simulation of Quantum Well Infrared Photodetector written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Optoelectronic Device Modeling and Simulation written by Joachim Piprek and published by CRC Press. This book was released on 2017-10-12 with total page 887 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a comprehensive survey of fundamental concepts and methods for optoelectronic device modeling and simulation. Gives a broad overview of concepts with concise explanations illustrated by real results. Compares different levels of modeling, from simple analytical models to complex numerical models. Discusses practical methods of model validation. Includes an overview of numerical techniques.

Download or read book The Physics of Quantum Well Infrared Photodetectors written by K. K. Choi and published by World Scientific. This book was released on 1997 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, infrared imaging has been used exclusively for military applications. In fact, it can also be useful in a wide range of scientific and commercial applications. However, its wide spread use was impeded by the scarcity of the imaging systems and its high cost. Recently, there is an emerging infrared technology based on quantum well intersubband transition in III-V compound semiconductors. With the new technology, these impedances can be eliminated and a new era of infrared imaging is in sight. This book is designed to give a systematic description on the underlying physics of the new detectors and other issues related to infrared managing.

Download or read book Electromagnetic Modelling of Quantum Well Infrared Photodetectors written by and published by . This book was released on 2003 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our work has focused on two principal aspects: (a) developing a rigorous modal transmission-line (MTL) approach for modeling quantum-well infrared photodetectors (QWIPs) and other optoelectronic devices. and (b) applying this approach to evaluate the performance of actual QWIPs. The geometry of the QWlPs may include any number of different dielectric and metallic layers, which may generally be periodic with & arbitrary profiles, The theoretical part (a) was carried out for both two-dimensional lamellar and three- dimensional grid geometries In the applied part (b), we have obtained numerical results for QWIPs under experimental study by scientists at the Army Research Laboratory (ARL) and Princeton University, with whom we collaborated on a continuous basis, Our analytical results show very good agreement with the experimental data, thus establishing that our MTL modeling is both powerful and accurate Using this approach, we have also derived design criteria for a wide variety of QWIPs, which were subsequently fabricated with specifications that conformed to oar design guidelines. In addition, we have developed design procedures for new QWIPs for focal plane arrays, as well as novel QWIP geometries to be used as two-color detectors, or as spectrometers over a wide frequency range. These newer devices are presently in the fabrication stage at ARL.

Download or read book Characterization and Analysis of a Multicolor Quantum Well Infrared Photodetector written by and published by . This book was released on 2006 with total page 67 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents analysis and characterization of performance of a newly designed, multicolor quantum well infrared photodetector (QWIP). Specifically, it focuses on a detector capable of detecting infrared emissions in the near infrared (NIR), mid-wavelength infrared (MWIR), and long-wavelength infrared (LWIR). Through photocurrent spectroscopy and performance analysis, this prototype detector can be classified and prepared for possible future use within the U.S. Armed Forces. Certain military applications require a highly accurate, reliable, sensitive, and multispectral infrared detector to identify targets and ensure mission success. By designing and fabricating a multicolor quantum well infrared photodetector, simultaneous detection of targets in the near infrared, mid-wavelength infrared and long-wavelength infrared is possible using only one detector. In addition, power and cooling requirements for quantum well infrared detectors makes them suitable for use in the field.

Download or read book Investigation of High Performance Multicolor Quantum Well Infrared Photodetectors and 4 X 4 Three color Focal Plane Array for Mid and Long wavelength Applications written by Jung Hee Lee and published by . This book was released on 2000 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intersubband Infrared Photodetectors written by V. Ryzhii and published by World Scientific. This book was released on 2003 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared technologies are very important for a wide range of military, scientific and commercial applications. Devices and systems based on semiconductor heterostructure and quantum well and quantum dot structures open up a new era in infrared technologies.This book deals with various topics related to the latest achievements in the development of intersubband infrared photodetectors, reviewed by top experts in the field. It covers physical aspects of the operation of the devices as well as details of their design in different applications. The papers included in the book will be useful for researchers and engineers interested in the physics of optoelectronic devices as well as their practical design and applications.

Download or read book High Responsivity Tunable Step Quantum Well Infrared Photodetector written by Yeo Hwee Tiong and published by . This book was released on 2004-12-01 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis, the performance of a step quantum well infrared photodetector (QWIP), which was designed to detect a laser spot at 1.05 m and IR radiation between 9.5 m to 10.5 m, was evaluated. In the far infrared (FIR), the maximum responsivity of the test detector at 10 K was measured at 1.02 A/W with a peak wavelength of 10.3 m under a negative bias of 0.83 V. The D* at background limited infrared performance (BLIP) was measured at 8.0x10(9) cm square root Hz/W with 180 degrees field of view. The BLIP temperature was found to be about 55 K. In addition, the FIR detection wavelength found shift with the amount of bias across the device. The amount of shift observed was 0.21 meV/ kvcm-1 which is due to linear Stark effect associated with the step quantum well. The quantum well infrared detectors made of square quantum wells found to have an order of magnitude lower Stark shift originated from second order effects. This suggests that the step well infrared detector can have applications in tunable wavelength infrared detectors.

Download or read book Advances in Research and Development written by and published by Elsevier. This book was released on 1995-11-22 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics of Thin Films is one of the longest running continuing series in thin film science, consisting of twenty volumes since 1963. The series contains quality studies of the properties of various thinfilms materials and systems. In order to be able to reflect the development of today's science and to cover all modern aspects of thin films, the series, starting with Volume 20, has moved beyond the basic physics of thin films. It now addresses the most important aspects of both inorganic and organic thin films, in both their theoretical as well as technological aspects. Therefore, in order to reflect the modern technology-oriented problems, the title has been slightly modified from Physics of Thin Films to Thin Films. Discusses the latest research about structure, physics, and infrared photoemissive behavior of heavily doped silicon homojunctions and Ge and GaAs-based alloy junctions Reviews the current status of SiGe/Si quantum wells for infrared detection Discusses key developments in the growing research on quantum-well infrared photodetectors (QWIPs) Reviews Chois development of a family of novel three-terminal, multi-quantum well devices designed to improve high-temperature IR detectivity at long wavelengths Describes recent studies aimed at using multi-quantum well structures to achieve higher performance in solar cell devices based on materials systems

Download or read book Resonant Infrared Detectors And Emitters written by Kwong-kit Choi and published by World Scientific. This book was released on 2024-05-24 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel of The Physics of Quantum Well Infrared Photodetectors (1997), which covered the basic physics of QWIPs. In the intervening 27 years, QWIP properties pertinent to infrared detection are much better understood, and QWIP technology has become a mainstream, widely deployed infrared technology. The main progress is the ability to know the QWIP absorption quantum efficiency quantitatively through rigorous electromagnetic modeling. The lack of theoretical prediction has impeded QWIP development for a long time. Generally, an arbitrary choice of detector structures yields substantial variations of absorption properties, and QWIP was regarded as a low quantum efficiency detector. With the advent of electromagnetic modeling, quantum efficiency of any detector geometry can be known exactly and be optimized to attain a large satisfactory value. Consequently, all properties of QWIPs are predictable, not unlike prevailing silicon devices. This unique characteristic enables QWIP to be the most manufacturable long wavelength infrared technology in mass production. This book by K K Choi, a co-inventor of QWIPs, will capture this exciting development.Based on the materials expounded in the book, the reader will know key performance metrics in infrared detection, in-depth knowledge of QWIP material and structural designs, array production, its application, and practical knowledge of electromagnetic modeling. In addition, the book will describe using micro- and nano-structures to enhance the emission properties of active and passive optical emitters, similar to detectors. The application of rigorous electromagnetic modeling to optical emitters is new to the optoelectronic community. The resonator-pixel emitter structure with its modeling method will no doubt be able to attract substantial academic and industrial attention in years to come.

Download or read book Development of High Performance Multicolor Quantum Well Infrared Photodetectors and Studies of Enhancing Light Coupling and Radiation Effects in QWIPs written by and published by . This book was released on 1999 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report, we present the design, fabrication, and characterization of several high performance multi-color and broadband quantum well infrared photodetectors (QWIPs) for both MWIR and LWIR applications. The report covers tasks performed during the period from March 3, 1998 through July 10, 1999. A very high sensitivity, high-strain, multi-color triple-coupled (TC-) QWIP using InGaAs/AlGaAs/InGaAs material systems has been developed in this project for LWIR multi-color detection. A two-stack InGaAs/AlGaAs/InGaAs TC-QWIP and InGaAs/AlGaAs TC-QWIP has been developed for the LWIR and MWIR dual-band detection. In addition, a high-strain InGaAs/GaAs TC-QWIP with and without two-dimensional (2-D) grating coupler has been designed, fabricated, and characterized for the LWIR detection. This device shows very high responsivity under 450 back-illumination. Several broadband (BB-) QWIPs have been developed for the LWIR detection. These include (1) two-stack, five-well n-type InGaAs/AlGaAs broadband (BB-) QWIPs with 3- and 7-period QWs in the unit cell, (2) 3- and 4-well n-type BB-QWIPs, and (3) two 3- and 4- well p-type BB-QWIPs. In addition, a three-stack InGaAs/AlGaAs/InGaAs BB TC-QWIP grown on GaAs substrate has been developed for LWIR detection, which has a FWHM spectral bandwidth twice larger than the single-stack TC-QWIP. Finally, a MWIR InGaAs/InAlAs TC-QWIP grown on InP substrate, operating up to T = 116K with excellent device performance, has also been demonstrated. Four journal papers and six conference papers have been published and presented from this work.

Download or read book Proceedings of the Fifth International Symposium on Long Wavelength Infrared Detectors and Arrays Physics and Applications written by Sheng S. Li and published by The Electrochemical Society. This book was released on 1997 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the First International Symposium on Long Wavelength Infrared Detectors and Arrays Physics and Applications written by Farhad Radpour and published by . This book was released on 1995 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.