Download or read book 20 ASIM Fachtagung Simulation in Produktion und Logistik written by Sören Feldkamp, Niclas Souren, Rainer Straßburger, Steffen Bergmann and published by BoD – Books on Demand. This book was released on 2023-01-01 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Die 20. ASIM-Fachtagung "Simulation in Produktion und Logistik", Ilmenau, 13.-15. September 2023, steht unter dem Motto der „Nachhaltigkeit in Produktion und Logistik“. Sie soll Anregungen und Denkanstöße geben und über bereits erfolgreiche Projekte und Neuerungen berichten. Der vorliegende Tagungsband präsentiert neben aktuellen Beiträgen aus der klassischen Simulationsforschung und -anwendung, die z.B. den Digitalen Zwilling thematisieren, auch hochinteressante und einschlägige Beiträge zu Fragen der Abbildung energie- und nachhaltigkeitsbezogener Einflussfaktoren in der Simulation.

Download or read book CIRP Novel Topics in Production Engineering Volume 1 written by Tullio Tolio and published by Springer Nature. This book was released on with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Related Material Flow Simulation in Production and Logistics written by Sigrid Wenzel and published by Springer Nature. This book was released on 2024-01-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides for the first time an overview on the current approaches and applications of energy aspects in production and logistics by the use of simulation techniques. During the last decade, the importance of energy in the material flow processes has become more and more important. The pressure to reduce the environmental footprint of production and logistics systems will even intensify in future. Therefore, enterprises have started to integrate the use of energy into their planning processes much more than before, even designing feedback loops, e.g., from energy control to production control. This receives additional attention with the increasing use of renewable, but less reliable, energy sources. Care must be taken to establish processes that aim to use energy when it is available. As an example, many industrial processes like melting or coating have significant energy demands, but could vary the point of time of its consumption within specific limits, leading to a very high complexity. ​ It discusses the construction and application of energy-specific performance indicators and analyzes the input information that needs to be acquired before implementing suitable models. On this basis, concrete technical solutions are introduced.

Download or read book Enterprise Information Systems written by Joaquim Filipe and published by Springer Nature. This book was released on 2022-07-07 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains extended, revised and selected papers from the 23rd International Conference on Enterprise Information Systems, ICEIS 2021, held online during April 2021. The 26 papers presented in this volume were carefully reviewed and selected for inclusion from a total of 241 submissions. They are grouped in sections on databases and information systems integration, artificial intelligence and decision support systems, information systems analysis and specification, software agents and internet computing, human-computer interaction, and enterprise architecture.

Download or read book Internet of Production written by Christian Brecher and published by Springer Nature. This book was released on 2024-01-30 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seminal compendium, available through open access, illuminates the forefront of digital collaboration in production. It introduces the visionary concept of the Internet of Production (IoP), an ambitious initiative by Germany's esteemed Cluster of Excellence at RWTH Aachen University. This handbook pioneers the integration of data, models, and knowledge across development, production, and user cycles, offering interdisciplinary insights into production technology's horizons with the overall objective to create a worldwide lab. The work is organized into seven key parts, each contributing to a comprehensive understanding of the IoP. Part I lays the foundation with interdisciplinary visions and concepts. Part II delves into IoP's infrastructure, encompassing digital shadows and actionable artificial intelligence. Part III examines materials within the digitalized production landscape. Part IV confronts the challenges and potentials of production processes under novel digitalization methods. Part V focuses on production management with data-driven decision support, while Part VI explores agile development processes. Finally, Part VII delves into the interplay between internal and external perspectives in the IoP, human-centered work design, and platform-based ecosystems. Supported by the German Research Foundation (DFG), this compendium redefines manufacturing through the transformative IoP lens. Embrace this scholarly endeavor to embrace technological advancement. This is an open access book.

Download or read book Advances in Automotive Production Technology Towards Software Defined Manufacturing and Resilient Supply Chains written by Niklas Kiefl and published by Springer Nature. This book was released on 2023-06-04 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the series ARENA2036 compiles the outcome of the 2nd Stuttgart Conference on Automotive Production (SCAP2022). The peer-reviewed contributions in this book are arranged thematically in three parts and cover a wide variety of topics: (A) Software-defined Manufacturing, (B) Data-driven Technologies, and (C) Advanced Manufacturing and Sustainability. SCAP2022 was organized by ARENA2036 in close collaboration with the Institute for Control Engineering of Machine Tools and Manufacturing Units of the University of Stuttgart. The Conference took place on site from November 16 - 18, 2022 and provided the opportunity for national and international scientists to present their latest research results. The conference has taken another big step in becoming an established forum for topics related to the production of the future. The great success of this year's conference will be continued with the next SCAP in 2024 with new forward-looking topics. This is an open access book.

Download or read book From batch size 1 to serial production Adaptive robots for scalable and flexible production systems written by Mohamad Bdiwi and published by Frontiers Media SA. This book was released on 2023-05-24 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Annals of Scientific Society for Assembly Handling and Industrial Robotics 2022 written by Thorsten Schüppstuhl and published by Springer Nature. This book was released on 2023-07-10 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access proceedings presents a good overview of the current research landscape of assembly, handling and industrial robotics. The objective of MHI Colloquium is the successful networking at both academic and management level. Thereby, the colloquium focuses an academic exchange at a high level in order to distribute the obtained research results, to determine synergy effects and trends, to connect the actors in person and in conclusion, to strengthen the research field as well as the MHI community. In addition, there is the possibility to become acquatined with the organizing institute. Primary audience is formed by members of the scientific society for assembly, handling and industrial robotics (WGMHI).

Download or read book Transdisciplinary Engineering for Resilience Responding to System Disruptions written by L. Newnes and published by IOS Press. This book was released on 2021-11-17 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: No one discipline or person can encompass all the knowledge necessary to solve complex, ill-defined problems, or problems for which a solution is not immediately obvious. The concept of Concurrent Engineering (CE) – interdisciplinary, but with an engineering focus – was developed to increase the efficiency and effectiveness of the Product Creation Process (PCP) by conducting different phases of a product’s life concurrently. Transdisciplinary Engineering has transcended CE, emphasizing the crucial importance of interdisciplinary openness and collaboration. This book presents the proceedings of the 28th ISTE International Conference on Transdisciplinary Engineering (TE2021). Held online from 5 – 9 July 2021 and entitled ‘Transdisciplinary Engineering for Resilience: Responding to System Disruptions’, this is the second conference in the series held virtually due to the COVID-19 pandemic. The annual TE conference constitutes an important forum for international scientific exchange on transdisciplinary engineering research, advances, and applications, and is attended by researchers, industry experts and students, as well as government representatives. The book contains 58 peer-reviewed papers, selected from more than 80 submissions and ranging from the theoretical and conceptual to strongly pragmatic and addressing industrial best practice. The papers are grouped under 6 headings covering theory; education and training; PD methods and digital TE; industry and society; product systems; and individuals and teams. Providing an overview of the latest research results and knowledge of product creation processes and related methodologies, the book will be of interest to all researchers, design practitioners, and educators working in the field of Transdisciplinary Engineering.

Download or read book Advances in Production Management Systems Artificial Intelligence for Sustainable and Resilient Production Systems written by Alexandre Dolgui and published by Springer Nature. This book was released on 2021-09-01 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set IFIP AICT 630, 631, 632, 633, and 634 constitutes the refereed proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2021, held in Nantes, France, in September 2021.* The 378 papers presented were carefully reviewed and selected from 529 submissions. They discuss artificial intelligence techniques, decision aid and new and renewed paradigms for sustainable and resilient production systems at four-wall factory and value chain levels. The papers are organized in the following topical sections: Part I: artificial intelligence based optimization techniques for demand-driven manufacturing; hybrid approaches for production planning and scheduling; intelligent systems for manufacturing planning and control in the industry 4.0; learning and robust decision support systems for agile manufacturing environments; low-code and model-driven engineering for production system; meta-heuristics and optimization techniques for energy-oriented manufacturing systems; metaheuristics for production systems; modern analytics and new AI-based smart techniques for replenishment and production planning under uncertainty; system identification for manufacturing control applications; and the future of lean thinking and practice Part II: digital transformation of SME manufacturers: the crucial role of standard; digital transformations towards supply chain resiliency; engineering of smart-product-service-systems of the future; lean and Six Sigma in services healthcare; new trends and challenges in reconfigurable, flexible or agile production system; production management in food supply chains; and sustainability in production planning and lot-sizing Part III: autonomous robots in delivery logistics; digital transformation approaches in production management; finance-driven supply chain; gastronomic service system design; modern scheduling and applications in industry 4.0; recent advances in sustainable manufacturing; regular session: green production and circularity concepts; regular session: improvement models and methods for green and innovative systems; regular session: supply chain and routing management; regular session: robotics and human aspects; regular session: classification and data management methods; smart supply chain and production in society 5.0 era; and supply chain risk management under coronavirus Part IV: AI for resilience in global supply chain networks in the context of pandemic disruptions; blockchain in the operations and supply chain management; data-based services as key enablers for smart products, manufacturing and assembly; data-driven methods for supply chain optimization; digital twins based on systems engineering and semantic modeling; digital twins in companies first developments and future challenges; human-centered artificial intelligence in smart manufacturing for the operator 4.0; operations management in engineer-to-order manufacturing; product and asset life cycle management for smart and sustainable manufacturing systems; robotics technologies for control, smart manufacturing and logistics; serious games analytics: improving games and learning support; smart and sustainable production and supply chains; smart methods and techniques for sustainable supply chain management; the new digital lean manufacturing paradigm; and the role of emerging technologies in disaster relief operations: lessons from COVID-19 Part V: data-driven platforms and applications in production and logistics: digital twins and AI for sustainability; regular session: new approaches for routing problem solving; regular session: improvement of design and operation of manufacturing systems; regular session: crossdock and transportation issues; regular session: maintenance improvement and lifecycle management; regular session: additive manufacturing and mass customization; regular session: frameworks and conceptual modelling for systems and services efficiency; regular session: optimization of production and transportation systems; regular session: optimization of supply chain agility and reconfigurability; regular session: advanced modelling approaches; regular session: simulation and optimization of systems performances; regular session: AI-based approaches for quality and performance improvement of production systems; and regular session: risk and performance management of supply chains *The conference was held online.

Download or read book Project Management in Logistics and Supply Chain Management written by Dirk H. Hartel and published by Springer Nature. This book was released on 2022-03-28 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practice-oriented guide comprehensively describes the basics of planning and implementing project management in logistics and supply chain management. It also presents a range of methods and tools for assessing project risks and monitoring projects. Containing ten detailed and practical examples involving Germany-based global players like Porsche, Würth, Continental and SME, the book shares valuable and well-founded insights into systematic project management. As such, it is chiefly intended for career starters, career changers and students in the field of logistics and supply chain management.

Download or read book Manufacturing Driving Circular Economy written by Holger Kohl and published by Springer Nature. This book was released on 2023-05-27 with total page 1105 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. It gathers the proceedings of the 18th Global Conference on Sustainable Manufacturing, held on October 5-7, 2022, as a hybrid event, in/from Berlin, Germany. With a focus on manufacturing advances and practices driving the circular economy, the chapters selected for this book report on sustainable manufacturing technologies for the mobility, energy and construction sector, and for machines and equipments, covering applications of artificial intelligence and industry 4.0. Moreover, they discuss energy-efficient process, waste reuse, and CO2 neutral production, giving a special emphasis to developing sustainable manufacturing in emerging countries. This book offers extensive and timely information for both researchers and professionals in the field of manufacturing and business development.

Download or read book Learning Factories of the Future written by Sebastian Thiede and published by Springer Nature. This book was released on 2024 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents peer-reviewed papers from 14th International Conference on Learning Factories (CLF 2024) that took place from April 17-19, 2024, at the University of Twente, the Netherlands. CLF 2024 continued the successful CLF conference series targeting the latest research and development in the field of learning factories. The book is organized into two volumes and covers state-of-the-art research insights towards Learning Factories of the Future including learning factory design, Industry 5.0, digital twinning and VR/AR, 5G/6G in learning factories, AI for manufacturing systems, human-centred work design, human-robot collaboration, sustainability in learning factories, as well as cross-learning factory product/production systems. The book seamlessly integrates theory with real-world practice, empowering learners such as students, qualified engineers, and workers to keep pace with rapidly evolving technologies and methodologies, through enhancing learning factories. It also helps society and industry effectively manage future transitions with addressing current topics around digitalization, sustainability, and lifelong learning in industry.

Download or read book Digital Transformation for Sustainability written by Jorge Marx Gómez and published by Springer Nature. This book was released on 2022-12-01 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents case studies to analyse the relationship between sustainability – environmental, social, institutional and economic – and digital innovation. The respective contributions offer a contextualisation of the main present and future trends concerning these two elements, and present analyses from economic, technical, managerial, and social perspectives alike. The individual sections of the book focus on interactions between sustainability and digital innovation in existing organisations and highlight the new opportunities, challenges and threats that may emerge as a result. The contributions are mainly based on case studies and research conducted in Europe and Africa, with a few focusing on Southeast Asia and Central America, and were prepared by experts in the fields of Information Systems, Computer Science, Social Development, and Economics.

Download or read book DigiTwin An Approach for Production Process Optimization in a Built Environment written by Josip Stjepandić and published by Springer Nature. This book was released on 2021-08-23 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The focus of this book is an application of Digital Twin as a concept and an approach, based on the most accurate view on a physical production system and its digital representation of complex engineering products and systems. It describes a methodology to create and use Digital Twin in a built environment for the improvement and optimization of factory processes such as factory planning, investment planning, bottleneck analysis, and in-house material transport. The book provides a practical response based on achievements of engineering informatics in solving challenges related to the optimization of factory layout and corresponding processes. This book introduces the topic, providing a foundation of knowledge on process planning, before discussing the acquisition of objects in a factory and the methods for object recognition. It presents process simulation techniques, explores challenges in process planning, and concludes by looking at future areas of progression. By providing a holistic, trans-disciplinary perspective, this book will showcase Digital Twin technology as state-of-the-art both in research and practice.

Download or read book Process Simulation and Optimization in Sustainable Logistics and Manufacturing written by Pawel Pawlewski and published by . This book was released on 2014-06-30 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance Management in Humanitarian Logistics Development of a Process driven and IT supported Performance Measurement System written by Adam Widera and published by Logos Verlag Berlin GmbH. This book was released on 2023-08-25 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Logistics and supply chain management are considered as the backbone of humanitarian operations, significantly influencing their performance. Consequently, it is not surprising that the academic community addressed performance measurement in humanitarian logistics early on and extensively. However, there exists a significant disparity between the academic findings on performance measurement and their practical implementation within humanitarian organizations. What factors contribute to this gap, and how can we bridge it? This book aims to provide a socio-technical solution through an action researchbased approach that designs and develops a process-driven and IT-supported performance management system for humanitarian logistics. By utilizing an iterative and participatory design methodology, an active involvement of humanitarian organizations in identifying and addressing their practitioner realities, needs, and objectives is ensured. The resulting performance management system has been designed, implemented, and evaluated within three distinct and representative humanitarian organizations. As a result, these research findings hold promise for enhancing the capabilities of humanitarian organizations to measure and manage logistics performance effectively.