Download or read book Simulation driven Aerodynamic Design Using Variable fidelity Models written by Leifur Leifsson and published by World Scientific. This book was released on 2015-01-09 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulations is a fundamental tool of the design process in many engineering disciplines including aerospace engineering. However, although high-fidelity numerical models are accurate, they can be computationally expensive with evaluation time for a single design as long as hours, days or even weeks. Simulation-driven design using conventional optimization techniques may be therefore prohibitive.This book explores the alternative: performing computationally efficient design using surrogate-based optimization, where the high-fidelity model is replaced by its computationally cheap but still reasonably accurate representation: a surrogate. The emphasis is on physics-based surrogates. Application-wise, the focus is on aerodynamics and the methods and techniques described in the book are demonstrated using aerodynamic shape optimization cases. Applications in other engineering fields are also demonstrated.State-of-the-art techniques and a depth of coverage never published before make this a unique and essential book for all researchers working in aerospace and other engineering areas and dealing with optimization, computationally expensive design problems, and simulation-driven design.

Download or read book Simulation Driven Design by Knowledge Based Response Correction Techniques written by Slawomir Koziel and published by Springer. This book was released on 2016-05-13 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focused on efficient simulation-driven multi-fidelity optimization techniques, this monograph on simulation-driven optimization covers simulations utilizing physics-based low-fidelity models, often based on coarse-discretization simulations or other types of simplified physics representations, such as analytical models. The methods presented in the book exploit as much as possible any knowledge about the system or device of interest embedded in the low-fidelity model with the purpose of reducing the computational overhead of the design process. Most of the techniques described in the book are of response correction type and can be split into parametric (usually based on analytical formulas) and non-parametric, i.e., not based on analytical formulas. The latter, while more complex in implementation, tend to be more efficient. The book presents a general formulation of response correction techniques as well as a number of specific methods, including those based on correcting the low-fidelity model response (output space mapping, manifold mapping, adaptive response correction and shape-preserving response prediction), as well as on suitable modification of design specifications. Detailed formulations, application examples and the discussion of advantages and disadvantages of these techniques are also included. The book demonstrates the use of the discussed techniques for solving real-world engineering design problems, including applications in microwave engineering, antenna design, and aero/hydrodynamics.

Download or read book Computational Optimization Methods and Algorithms written by Slawomir Koziel and published by Springer. This book was released on 2011-06-17 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational optimization is an important paradigm with a wide range of applications. In virtually all branches of engineering and industry, we almost always try to optimize something - whether to minimize the cost and energy consumption, or to maximize profits, outputs, performance and efficiency. In many cases, this search for optimality is challenging, either because of the high computational cost of evaluating objectives and constraints, or because of the nonlinearity, multimodality, discontinuity and uncertainty of the problem functions in the real-world systems. Another complication is that most problems are often NP-hard, that is, the solution time for finding the optimum increases exponentially with the problem size. The development of efficient algorithms and specialized techniques that address these difficulties is of primary importance for contemporary engineering, science and industry. This book consists of 12 self-contained chapters, contributed from worldwide experts who are working in these exciting areas. The book strives to review and discuss the latest developments concerning optimization and modelling with a focus on methods and algorithms for computational optimization. It also covers well-chosen, real-world applications in science, engineering and industry. Main topics include derivative-free optimization, multi-objective evolutionary algorithms, surrogate-based methods, maximum simulated likelihood estimation, support vector machines, and metaheuristic algorithms. Application case studies include aerodynamic shape optimization, microwave engineering, black-box optimization, classification, economics, inventory optimization and structural optimization. This graduate level book can serve as an excellent reference for lecturers, researchers and students in computational science, engineering and industry.

Download or read book Solving Computationally Expensive Engineering Problems written by Slawomir Koziel and published by Springer. This book was released on 2014-10-01 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational complexity is a serious bottleneck for the design process in virtually any engineering area. While migration from prototyping and experimental-based design validation to verification using computer simulation models is inevitable and has a number of advantages, high computational costs of accurate, high-fidelity simulations can be a major issue that slows down the development of computer-aided design methodologies, particularly those exploiting automated design improvement procedures, e.g., numerical optimization. The continuous increase of available computational resources does not always translate into shortening of the design cycle because of the growing demand for higher accuracy and necessity to simulate larger and more complex systems. Accurate simulation of a single design of a given system may be as long as several hours, days or even weeks, which often makes design automation using conventional methods impractical or even prohibitive. Additional problems include numerical noise often present in the simulation data, possible presence of multiple locally optimum designs, as well as multiple conflicting objectives. In this edited book, various techniques that can alleviate solving computationally expensive engineering design problems are presented. One of the most promising approaches is the use of fast replacement models, so-called surrogates, that reliably represent the expensive, simulation-based model of the system/device of interest but they are much cheaper and analytically tractable. Here, a group of international experts summarize recent developments in the area and demonstrate applications in various disciplines of engineering and science. The main purpose of the work is to provide the basic concepts and formulations of the surrogate-based modeling and optimization paradigm, as well as discuss relevant modeling techniques, optimization algorithms and design procedures. Therefore, this book should be useful to researchers and engineers from any discipline where computationally heavy simulations are used on daily basis in the design process.

Download or read book Performance Driven Surrogate Modeling of High Frequency Structures written by Slawomir Koziel and published by Springer Nature. This book was released on 2020-02-19 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses surrogate modeling of high-frequency structures including antenna and microwave components. The focus is on constrained or performance-driven surrogates. The presented techniques aim at addressing the limitations of conventional modeling methods, pertinent to the issues of dimensionality and parameter ranges that need to be covered by the surrogate to ensure its design utility. Within performance-driven methodologies, mitigation of these problems is achieved through appropriate confinement of the model domain, focused on the regions promising from the point of view of the relevant design objectives. This enables the construction of reliable surrogates at a fraction of cost required by conventional methods, and to accomplish the modeling tasks where other techniques routinely fail. The book provides a broad selection of specific frameworks, extensively illustrated using examples of real-world microwave and antenna structures along with numerous design examples. Furthermore, the book contains introductory material on data-driven and physics-based surrogates. The book will be useful for the readers working in the area of high-frequency electronics, including microwave engineering, antenna design, microwave photonics, magnetism, especially those that utilize electromagnetic (EM) simulation models in their daily routines. Covers performance-driven and constrained modeling methods, not available in other books to date; Discusses of a wide range of practical case studies including a variety of microwave and antenna structures; Includes design applications of the presented modeling frameworks, including single- and multi-objective parametric optimization.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Nuno Pina and published by Springer Science & Business Media. This book was released on 2012-10-12 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes extended and revised versions of a set of selected papers from the 1st International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2011) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Noordwijkerhout, The Netherlands. SIMULTECH 2011 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation and Simulation Team and held in cooperation with ACM Special Interest Group on Simulation and Modeling (ACM SIGSIM) and the AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS).

Download or read book Multi fidelity Surrogates written by Qi Zhou and published by Springer Nature. This book was released on 2022-11-07 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book investigates two types of static multi-fidelity surrogates modeling approaches, sequential multi-fidelity surrogates modeling approaches, the multi-fidelity surrogates-assisted efficient global optimization, reliability analysis, robust design optimization, and evolutionary optimization. Multi-fidelity surrogates have attracted a significant amount of attention in simulation-based design and optimization in recent years. Some real-life engineering design problems, such as prediction of angular distortion in the laser welding, optimization design of micro-aerial vehicle fuselage, and optimization design of metamaterial vibration isolator, are also provided to illustrate the ability and merits of multi-fidelity surrogates in support of engineering design. Specifically, lots of illustrative examples are adopted throughout the book to help explain the approaches in a more “hands-on” manner. This book is a useful reference for postgraduates and researchers of mechanical engineering, as well as engineers of enterprises in related fields.

Download or read book Computational Aerodynamic Modeling of Aerospace Vehicles written by Mehdi Ghoreyshi and published by MDPI. This book was released on 2019-03-08 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, the use of computational fluid dynamics (CFD) solutions is considered as the state-of-the-art in the modeling of unsteady nonlinear flow physics and offers an early and improved understanding of air vehicle aerodynamics and stability and control characteristics. This Special Issue covers recent computational efforts on simulation of aerospace vehicles including fighter aircraft, rotorcraft, propeller driven vehicles, unmanned vehicle, projectiles, and air drop configurations. The complex flow physics of these configurations pose significant challenges in CFD modeling. Some of these challenges include prediction of vortical flows and shock waves, rapid maneuvering aircraft with fast moving control surfaces, and interactions between propellers and wing, fluid and structure, boundary layer and shock waves. Additional topic of interest in this Special Issue is the use of CFD tools in aircraft design and flight mechanics. The problem with these applications is the computational cost involved, particularly if this is viewed as a brute-force calculation of vehicle’s aerodynamics through its flight envelope. To make progress in routinely using of CFD in aircraft design, methods based on sampling, model updating and system identification should be considered.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Mohammad S. Obaidat and published by Springer Science & Business Media. This book was released on 2013-11-26 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes extended and revised versions of a set of selected papers from the 2012 International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2012) which was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC) and held in Rome, Italy. SIMULTECH 2012 was technically co-sponsored by the Society for Modeling & Simulation International (SCS), GDR I3, Lionphant Simulation, Simulation Team and IFIP and held in cooperation with AIS Special Interest Group of Modeling and Simulation (AIS SIGMAS) and the Movimento Italiano Modellazione e Simulazione (MIMOS).

Download or read book Advances in Structural and Multidisciplinary Optimization written by Axel Schumacher and published by Springer. This book was released on 2017-12-04 with total page 2101 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume includes papers from the WSCMO conference in Braunschweig 2017 presenting research of all aspects of the optimal design of structures as well as multidisciplinary design optimization where the involved disciplines deal with the analysis of solids, fluids or other field problems. Also presented are practical applications of optimization methods and the corresponding software development in all branches of technology.

Download or read book Simulation Driven Modeling and Optimization written by Slawomir Koziel and published by Springer. This book was released on 2016-02-12 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume is devoted to the now-ubiquitous use of computational models across most disciplines of engineering and science, led by a trio of world-renowned researchers in the field. Focused on recent advances of modeling and optimization techniques aimed at handling computationally-expensive engineering problems involving simulation models, this book will be an invaluable resource for specialists (engineers, researchers, graduate students) working in areas as diverse as electrical engineering, mechanical and structural engineering, civil engineering, industrial engineering, hydrodynamics, aerospace engineering, microwave and antenna engineering, ocean science and climate modeling, and the automotive industry, where design processes are heavily based on CPU-heavy computer simulations. Various techniques, such as knowledge-based optimization, adjoint sensitivity techniques, and fast replacement models (to name just a few) are explored in-depth along with an array of the latest techniques to optimize the efficiency of the simulation-driven design process. High-fidelity simulation models allow for accurate evaluations of the devices and systems, which is critical in the design process, especially to avoid costly prototyping stages. Despite this and other advantages, the use of simulation tools in the design process is quite challenging due to associated high computational cost. The steady increase of available computational resources does not always translate into the shortening of the design cycle because of the growing demand for higher accuracy and necessity to simulate larger and more complex systems. For this reason, automated simulation-driven design—while highly desirable—is difficult when using conventional numerical optimization routines which normally require a large number of system simulations, each one already expensive.

Download or read book Computational Science ICCS 2019 written by João M. F. Rodrigues and published by Springer. This book was released on 2019-06-07 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: The five-volume set LNCS 11536, 11537, 11538, 11539 and 11540 constitutes the proceedings of the 19th International Conference on Computational Science, ICCS 2019, held in Faro, Portugal, in June 2019. The total of 65 full papers and 168 workshop papers presented in this book set were carefully reviewed and selected from 573 submissions (228 submissions to the main track and 345 submissions to the workshops). The papers were organized in topical sections named: Part I: ICCS Main Track Part II: ICCS Main Track; Track of Advances in High-Performance Computational Earth Sciences: Applications and Frameworks; Track of Agent-Based Simulations, Adaptive Algorithms and Solvers; Track of Applications of Matrix Methods in Artificial Intelligence and Machine Learning; Track of Architecture, Languages, Compilation and Hardware Support for Emerging and Heterogeneous Systems Part III: Track of Biomedical and Bioinformatics Challenges for Computer Science; Track of Classifier Learning from Difficult Data; Track of Computational Finance and Business Intelligence; Track of Computational Optimization, Modelling and Simulation; Track of Computational Science in IoT and Smart Systems Part IV: Track of Data-Driven Computational Sciences; Track of Machine Learning and Data Assimilation for Dynamical Systems; Track of Marine Computing in the Interconnected World for the Benefit of the Society; Track of Multiscale Modelling and Simulation; Track of Simulations of Flow and Transport: Modeling, Algorithms and Computation Part V: Track of Smart Systems: Computer Vision, Sensor Networks and Machine Learning; Track of Solving Problems with Uncertainties; Track of Teaching Computational Science; Poster Track ICCS 2019 Chapter “Comparing Domain-decomposition Methods for the Parallelization of Distributed Land Surface Models” is available open access under a Creative Commons Attribution 4.0 International License via link.springer.com.

Download or read book Computational Flight Testing written by Norbert Kroll and published by Springer Science & Business Media. This book was released on 2013-06-18 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on the German research initiative ComFliTe (Computational Flight Testing), the main goal of which was to enhance the capabilities of and tools for numerical simulation in flight physics to support future aircraft design and development. The initiative was coordinated by the German Aerospace Center (DLR) and promoted collaboration between the aircraft industry and academia. Activities focused on improving physical modeling for separated flows, developing advanced numerical algorithms for series computations and sensitivity predictions, as well as surrogate and reduced order modeling for aero data production and developing robust fluid-, structure- and flight mechanics coupling procedures. Further topics included more efficient handling of aircraft control surfaces and improving simulation methods for maneuvers, such as gust encounter. The important results of this three-year initiative were presented during the ComFliTe closing symposium, which took place at the DLR in Braunschweig, Germany, on 11-12 June 2012. Computational Flight Testing addresses both students and researchers in the areas of mathematics, numerical simulation and optimization methods, as well as professionals in aircraft design working at the forefront of their field.

Download or read book Surrogate Modeling For High frequency Design Recent Advances written by Slawomir Koziel and published by World Scientific. This book was released on 2022-03-04 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contemporary high-frequency engineering design heavily relies on full-wave electromagnetic (EM) analysis. This is primarily due to its versatility and ability to account for phenomena that are important from the point of view of system performance. Unfortunately, versatility comes at the price of a high computational cost of accurate evaluation. Consequently, utilization of simulation models in the design processes is challenging although highly desirable. The aforementioned problems can be alleviated by means of surrogate modeling techniques, the most popular of which are data-driven models. Although a large variety of methods are available, they are all affected by the curse of dimensionality. This is especially pronounced in high-frequency electronics, where typical system responses are highly nonlinear. Construction of practically useful surrogates covering wide ranges of parameters and operating conditions is a considerable challenge.Surrogate Modeling for High-Frequency Design presents a selection of works representing recent advancements in surrogate modeling and their applications to high-frequency design. Some chapters provide a review of specific topics such as neural network modeling of microwave components, while others describe recent attempts to improve existing modeling methodologies. Furthermore, the book features numerous applications of surrogate modeling methodologies to design optimization and uncertainty quantification of antenna, microwave, and analog RF circuits.

Download or read book Multi objective Design Of Antennas Using Surrogate Models written by Slawomir Koziel and published by World Scientific. This book was released on 2016-11-18 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses computationally-efficient multi-objective optimization of antenna structures using variable-fidelity electromagnetic simulations, surrogate modeling techniques, and design space reduction methods. Based on contemporary research, it formulates multi-objective design tasks, highlights related challenges in the context of antenna design, and discusses solution approaches. Specific focus is on providing methodologies for handling computationally expensive simulation models of antenna structures in the sense of their multi-objective optimization. Also given is a summary of recent developments in antenna design optimization using variable-fidelity simulation models. Numerous examples of real-world antenna design problems are provided along with discussions and recommendations for the readers interested in applying the considered methods in their design work.Written with researchers and students in mind, topics covered can also be applied across a broad spectrum of aeronautical, mechanical, electrical, biomedical and civil engineering. It is of particular interest to those dealing with optimization, computationally expensive design tasks and simulation-driven design.

Download or read book Response Feature Technology for High Frequency Electronics Optimization Modeling and Design Automation written by Anna Pietrenko-Dabrowska and published by Springer Nature. This book was released on 2023-10-16 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses response feature technology and its applications to modeling, optimization, and computer-aided design of high-frequency structures including antenna and microwave components. By exploring the specific structure of the system outputs, feature-based approaches facilitate simulation-driven design procedures, both in terms of improving their computational efficiency and reliability. These benefits are associated with the weakly nonlinear relationship between feature point coordinates and design variables, which—in the context of optimization—leads to inherent regularization of the objective functions. The book provides an overview of the subject, a definition and extraction of characteristic points, and feature-based design problem reformulation. It also outlines a number of numerical algorithms developed to handle local, global, and multi-criterial design, surrogate modeling, as well as uncertainty quantification. The discussed frameworks are extensively illustrated using examples of real microwave and antenna structures, along with numerous design cases. Introductory material on simulation-driven design, numerical optimization, as well as behavioral and physics-based surrogate modeling is also included. The book will be useful for readers working in the area of high-frequency electronics, including microwave engineering, antenna design, microwave photonics, magnetism and especially those who utilize electromagnetic (EM) simulation models in their daily routines.

Download or read book Simulation based Optimization Of Antenna Arrays written by Slawomir Koziel and published by World Scientific. This book was released on 2019-02-13 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses surrogate-assisted design of antenna arrays, in particular, how surrogate models, both data-driven and physics-based, can be utilized to expedite procedures such as parametric optimization, design closure, statistical analysis, or fault detection. Algorithms and design frameworks are illustrated using a large variety of examples including real-world printed-circuit antenna and antenna array structures.This unique compendium contains introductory materials concerning numerical optimization, both conventional (gradient-based and derivative-free, including metaheuristics) and surrogate-based, as well as a considerable selection of customized procedures developed specifically to handle antenna array problems. Recommendations concerning practical aspects of surrogate-assisted multi-objective antenna optimization are also given. The methods presented allow for cost-efficient handling of antenna array design problems (involving CPU-intensive EM models) in the context of design optimization and statistical analysis, which will benefit both researchers, designers and graduate students.