Download or read book Simulation and Modeling Methodologies Technologies and Applications SIMULTECH 2014 International Conference on written by and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Mohammad S. Obaidat and published by Springer. This book was released on 2016-01-14 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTECH that will be maintained in the next editions, considering not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, participation level and logistics.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Mohammad S. Obaidat and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book includes a set of selected extended papers from the 4th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2014), held in Vienna, Austria, from 28 to 30 August 2014. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. SIMULTECH 2014 received 167 submissions, from 45 countries, in all continents. After a double blind paper review performed by the Program Committee, 23% were accepted as full papers and thus selected for oral presentation. Additional papers were accepted as short papers and posters. A further selection was made after the Conference, based also on the assessment of presentation quality and audience interest, so that this book includes the extended and revised versions of the very best papers of SIMULTECH 2014. Commitment to high quality standards is a major concern of SIMULTECH that will be maintained in the next editions, considering not only the stringent paper acceptance ratios but also the quality of the program committee, keynote lectures, participation level and logistics.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Mohammad S. Obaidat and published by Springer. This book was released on 2014-10-21 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes extended and revised versions of a set of selected papers from the 3rd International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2013) which was co-organized by the Reykjavik University (RU) and sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC). SIMULTECH 2013 was held in cooperation with the ACM SIGSIM - Special Interest Group (SIG) on SImulation and Modeling (SIM), Movimento Italiano Modellazione e Simulazione (MIMOS) and AIS Special Interest Group on Modeling and Simulation (AIS SIGMAS) and technically co-sponsored by the Society for Modeling & Simulation International (SCS), Liophant Simulation, Simulation Team and International Federation for Information Processing (IFIP). This proceedings brings together researchers, engineers, applied mathematicians and practitioners working in the advances and applications in the field of system simulation.

Download or read book Distributed Simulation written by Okan Topçu and published by Springer. This book was released on 2016-01-27 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique text/reference provides a comprehensive review of distributed simulation (DS) from the perspective of Model Driven Engineering (MDE), illustrating how MDE affects the overall lifecycle of the simulation development process. Numerous practical case studies are included to demonstrate the utility and applicability of the methodology, many of which are developed from tools available to download from the public domain. Topics and features: Provides a thorough introduction to the fundamental concepts, principles and processes of modeling and simulation, MDE and high-level architecture Describes a road map for building a DS system in accordance with the MDE perspective, and a technical framework for the development of conceptual models Presents a focus on federate (simulation environment) architectures, detailing a practical approach to the design of federations (i.e., simulation member design) Discusses the main activities related to scenario management in DS, and explores the process of MDE-based implementation, integration and testing Reviews approaches to simulation evolution and modernization, including architecture-driven modernization for simulation modernization Examines the potential synergies between the agent, DS, and MDE methodologies, suggesting avenues for future research at the intersection of these three fields Distributed Simulation – A Model Driven Engineering Approach is an important resource for all researchers and practitioners involved in modeling and simulation, and software engineering, who may be interested in adopting MDE principles when developing complex DS systems.

Download or read book The Profession of Modeling and Simulation written by Andreas Tolk and published by John Wiley & Sons. This book was released on 2017-06-29 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definite guide to the theory, knowledge, technical expertise, and ethical considerations that define the M&S profession From traffic control to disaster management, supply chain analysis to military logistics, healthcare management to new drug discovery, modeling and simulation (M&S) has become an essential tool for solving countless real-world problems. M&S professionals are now indispensable to how things get done across virtually every aspect of modern life. This makes it all the more surprising that, until now, no effort has been made to systematically codify the core theory, knowledge, and technical expertise needed to succeed as an M&S professional. This book brings together contributions from experts at the leading edge of the modeling and simulation profession, worldwide, who share their priceless insights into issues which are fundamental to professional success and career development in this critically important field. Running as a common thread throughout the book is an emphasis on several key aspects of the profession, including the essential body of knowledge underlying the M&S profession; the technical discipline of M&S; the ethical standards that should guide professional conduct; and the economic and commercial challenges today’s M&S professionals face. • Demonstrates applications of M&S tools and techniques in a variety of fields—such as engineering, operations research, and cyber environments—with over 500 types of simulations • Highlights professional and academic aspects of the field, including preferred programming languages, professional academic and certification programs, and key international societies • Shows why M&S professionals must be fully versed in the theory, concepts, and tools needed to address the challenges of cyber environments The Profession of Modeling and Simulation is a valuable resource for M&S practitioners, developers, and researchers working in industry and government. Simulation professionals, including administrators, managers, technologists, faculty members, and scholars within the physical sciences, life sciences, and engineering fields will find it highly useful, as will students planning to pursue a career in the M&S profession. “ ...nearly three dozen experts in Modeling and Simulation (M&S) come together to make a compelling case for the recognition of M&S as a profession... Important reading for anyone seeking to elevate the standing of this vital field.” Alfred (Al) Grasso, President & CEO, The MITRE Corporation Andreas Tolk, PhD, is Technology Integrator for the Modeling, Simulation, Experimentation, and Analytics Division of The MITRE Corporation, an adjunct professor in the Department of Engineering Management and Systems Engineering and the Department for Modeling, Simulation, and Visualization Engineering at Old Dominion University, and an SCS fellow. Tuncer Ören, PhD, is Professor Emeritus of Computer Science at the University of Ottawa. He is an SCS fellow and an inductee to SCS Modeling and Simulation Hall of Fame. His research interests include advancing methodologies, ethics, body of knowledge, and terminology of modeling and simulation.

Download or read book Operations Research Applications in Health Care Management written by Cengiz Kahraman and published by Springer. This book was released on 2017-12-08 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive reference guide to operations research theory and applications in health care systems. It provides readers with all the necessary tools for solving health care problems. The respective chapters, written by prominent researchers, explain a wealth of both basic and advanced concepts of operations research for the management of operating rooms, intensive care units, supply chain, emergency medical service, human resources, lean health care, and procurement. To foster a better understanding, the chapters include relevant examples or case studies. Taken together, they form an excellent reference guide for researchers, lecturers and postgraduate students pursuing research on health care management problems. The book presents a dynamic snapshot on the field that is expected to stimulate new directions and stimulate new ideas and developments.

Download or read book Simulation and Modeling Methodologies Technologies and Applications written by Gerd Wagner and published by Springer Nature. This book was released on 2023-09-30 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This present book includes a set of selected best extended papers from the 12th International Conference on Simulation and Modeling Methodologies, Technologies and Applications (SIMULTECH 2022), that was held in Lisbon, Portugal, from July 14 to 16, 2022. The conference brought together researchers, engineers and practitioners interested in methodologies and applications of modeling and simulation. New and innovative solutions are reported in this book. A selection was made after the conference, based also on the conference chairs assessment, reviewers’ assessment, quality of presentation and audience interest, so that this book includes the extended and revised versions of the very best papers of the conference. New and innovative solutions are reported in this book.

Download or read book Networking Simulation for Intelligent Transportation Systems written by Benoit Hilt and published by John Wiley & Sons. This book was released on 2017-04-12 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book studies the simulation of wireless networking in the domain of Intelligent Transportation Systems (ITS) involving aircraft, railway and vehicular communication. On this subject, particular focus is placed on effective communication channels, mobility modeling, multi-technology simulation and global ITS simulation frameworks. Networking Simulation for Intelligent Transportation Systems addresses the mixing of IEEE802.11p and LTE into a dedicated simulation environment as well as the links between ITS and IoT; aeronautical mobility and VHD Data Link (VDL) simulation; virtual co-simulation for railway communication and control-command; realistic channel simulation, mobility modeling and autonomic simulation for VANET and quality metrics for VANET. The authors intend for this book to be as useful as possible to the reader as they provide examples of methods and tools for running realistic and reliable simulations in the domain of communications for ITS.

Download or read book Recent Advances in Network Simulation written by Antonio Virdis and published by Springer. This book was released on 2019-05-21 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to the OMNeT++ simulation environment and an overview of its ecosystem of ever-growing frameworks, which provide simulation models for diverse communication systems, protocols, and standards. The book covers the most recent advances of the three key points in the OMNeT++ environment: (1) The latest features that are being added to OMNeT++ itself, including improvements in the visualization options, in data processing, etc. (2) A comprehensive description of the current state of development and the work in progress of the main simulation frameworks, covering several aspects of communication such as vehicular, cellular, and sensor networks. (3) The latest advances and novel developments coming from a large research community. The presentation is guided through use cases and examples, always keeping in mind the practical and research purposes of the simulation process. Includes an introduction to the OMNeT++ simulation framework and its main features; Gives a comprehensive overview of ongoing research topics that exploits OMNeT++ as the simulation environment; Provides examples and uses cases focusing on the practical aspects of simulation.

Download or read book Maritime Technology and Engineering III written by Carlos Guedes Soares and published by CRC Press. This book was released on 2016-12-01 with total page 1226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maritime Technology and Engineering 3 is a collection of papers presented at the 3rd International Conference on Maritime Technology and Engineering (MARTECH 2016, Lisbon, Portugal, 4-6 July 2016). The MARTECH Conferences series evolved from biannual national conferences in Portugal, thus reflecting the internationalization of the maritime sector. The keynote lectures and the papers, making up nearly 150 contributions, came from an international group of authors focused on different subjects in a variety of fields: Maritime Transportation, Energy Efficiency, Ships in Ports, Ship Hydrodynamics, Ship Structures, Ship Design, Ship Machinery, Shipyard Technology, afety & Reliability, Fisheries, Oil & Gas, Marine Environment, Renewable Energy and Coastal Structures. This book will appeal to academics, engineers and professionals interested or involved in these fields.

Download or read book Differential Evolution In Chemical Engineering Developments And Applications written by Gade Pandu Rangaiah and published by World Scientific. This book was released on 2017-05-29 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization plays a key role in the design, planning and operation of chemical and related processes for several decades. Techniques for solving optimization problems are of deterministic or stochastic type. Of these, stochastic techniques can solve any type of optimization problems and can be adapted for multiple objectives. Differential evolution (DE), proposed about two decades ago, is one of the stochastic techniques. Its algorithm is simple to understand and use. DE has found many applications in chemical engineering.This unique compendium focuses on DE, its recent developments and applications in chemical engineering. It will cover both single and multi-objective optimization. The book contains a number of chapters from experienced editors, and also several chapters from active researchers in this area.

Download or read book Embedded Computer Systems Architectures Modeling and Simulation written by Alex Orailoglu and published by Springer Nature. This book was released on 2020-10-14 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 20th International Conference on Embedded Computer Systems: Architectures, Modeling, and Simulation, SAMOS 2020, held in Samos, Greece, in July 2020.* The 16 regular papers presented were carefully reviewed and selected from 35 submissions. In addition, 9 papers from two special sessions were included, which were organized on topics of current interest: innovative architectures for security and European projects on embedded and high performance computing for health applications. * The conference was held virtually due to the COVID-19 pandemic.

Download or read book Quantitative Evaluation of Systems written by Nathalie Bertrand and published by Springer. This book was released on 2017-08-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 14th International Conference on Quantitative Evaluation Systems, QEST 2017, held in Berlin, Germany, in September 2017.The 20 full papers and 4 tool papers presented were carefully reviewed and selected From 58 submissions. The papers are organized in topical sections entitled: probabilistic modeling; smart energy systems over the cloud; Petri nets and performance modeling; parametric verification; machine learning and formal methods; tools.

Download or read book Advances in Service Oriented and Cloud Computing written by Christian Zirpins and published by Springer Nature. This book was released on 2021-03-13 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the technical papers presented in the workshops, PhD Symposium and EU Projects Track which took place at the 8th European Conference on Service-Oriented and Cloud Computing, ESOCC 2020, held in Heraklion, Crete, Greece, in September 2020: 1st International Workshop on Edge Adoption and Migration, EdgeWays 2020, 16th International Workshop on Engineering Service-Oriented Applications and Cloud Services, WESOACS 2020, ESOCC 2020 PhD Symposium, ESOCC 2020 EU Projects Track. Due to the COVID-19 pandemic the conference and workshops were held in a virtual format. The 17 full papers and 2 short papers were reviewed and selected from 22 submissions. The papers focus on specific topics in service-oriented and cloud computing domains such as limits and/or advantages of existing cloud solutions, future internet technologies, efficient and adaptive deployment and management of service-based applications across multiple clouds, novel cloud service migration practices and solutions, digitization of enterprises in the cloud computing era, federated cloud networking services.

Download or read book Modeling and Simulation Based Systems Engineering Handbook written by Daniele Gianni and published by CRC Press. This book was released on 2018-10-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: The capability modeling and simulation (M&S) supplies for managing systems complexity and investigating systems behaviors has made it a central activity in the development of new and existing systems. However, a handbook that provides established M&S practices has not been available. Until now. Modeling and Simulation-Based Systems Engineering Handbook details the M&S practices for supporting systems engineering in diverse domains. It discusses how you can identify systems engineering needs and adapt these practices to suit specific application domains, thus avoiding redefining practices from scratch. Although M&S practices are used and embedded within individual disciplines, they are often developed in isolation. However, they address recurring problems common to all disciplines. The editors of this book tackled the challenge by recruiting key representatives from several communities, harmonizing the different perspectives derived from individual backgrounds, and lining them up with the book’s vision. The result is a collection of M&S systems engineering examples that offer an initial means for cross-domain capitalization of the knowledge, methodologies, and technologies developed in several communities. These examples provide the pros and cons of the methods and techniques available, lessons learned, and pitfalls to avoid. As our society moves further in the information era, knowledge and M&S capabilities become key enablers for the engineering of complex systems and systems of systems. Therefore, knowledge and M&S methodologies and technologies become valuable output in an engineering activity, and their cross-domain capitalization is key to further advance the future practices in systems engineering. This book collates information across disciplines to provide you with the tools to more efficiently design and manage complex systems that achieve their goals.

Download or read book Engineering Multi Agent Systems written by Amal El Fallah-Seghrouchni and published by Springer. This book was released on 2018-05-14 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the revised and selected papers from the 5th International Workshop on Engineering Multi-Agent Systems held in Sao Paulo, Brazil, in May 2018, in conjunction with AAMAS 2018. The 11 full papers presented in this volume were carefully reviewed and selected from 18 submissions. The book contains also the best paper of the workshop that has been published previously in another LNCS volume. The EMAS workshop focusses on the cross-fertilisation of ideas and experiences in the various fields with the aim to enhance knowledge and expertise in MAS engineering , to improve the state-of-the-art, to define new directions for MAS engineering, to investigate how established methodologies for engineering and large-scale and open MAS can be adapted.