Download or read book Simulated Ground Response Using Non linear Elastic Moduli written by Glyn M. Jones and published by . This book was released on 1985 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report discusses procedures for the extrapolation of low-strain seismic measurements made at a specific site to predict the site response under earthquake loading conditions. Because of the non-linear relation between stress and strain exhibited by soils at strain levels exceeding about 0.000001, a program to determine dynamic soil properties at low to high strain levels and at different depths in the soil column at the site is required. Utilizing recent advances in field measurement techniques, this goal can be best accomplished with a combination of in situ geophysical methods, including surface reflection and refraction methods; cross-hole and down-hole techniques utilizing impulsive and vibratory sources; and dynamic loading methods involving monitoring of in-place deformation. Knowledge of the variation with strain level and other factors of equivalent moduli and damping at a site may enable frequency-dependent scaling rules to be developed for the computation of high-strain response from microseismic response curves. This procedure can be evaluated by performing field measurements at sites for which comprehensive strong motion data bases are already available. Keywords: Modulus of elasticity. (Author).

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1986 with total page 1162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Aspects of Underground Construction in Soft Ground written by Klaas Jan Bakker and published by CRC Press. This book was released on 2013-05-23 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: A valuable source of reference on the current practices of analysis, design and construction of tunnels and underground structures in soft ground. This collection of reviewed papers covers a wide range of tunnelling practice, from deep excavations in Singapore to the construction of a new metro line in Barcelona. The international scope of the contributors makes this a truly comprehensive collection of work on the geotechnical aspects of soft ground excavation.

Download or read book Analytical Methods in Petroleum Upstream Applications written by Cesar Ovalles and published by CRC Press. This book was released on 2015-04-02 with total page 1351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective measurement of the composition and properties of petroleum is essential for its exploration, production, and refining; however, new technologies and methodologies are not adequately documented in much of the current literature. Analytical Methods in Petroleum Upstream Applications explores advances in the analytical methods and instrumentation that allow more accurate determination of the components, classes of compounds, properties, and features of petroleum and its fractions. Recognized experts explore a host of topics, including: A petroleum molecular composition continuity model as a context for other analytical measurements A modern modular sampling system for use in the lab or the process area to collect and control samples for subsequent analysis The importance of oil-in-water measurements and monitoring The chemical and physical properties of heavy oils, their fractions, and products from their upgrading Analytical measurements using gas chromatography and nuclear magnetic resonance (NMR) applications Asphaltene and heavy ends analysis Chemometrics and modeling approaches for understanding petroleum composition and properties to improve upstream, midstream, and downstream operations Due to the renaissance of gas and oil production in North America, interest has grown in analytical methods for a wide range of applications. The understanding provided in this text is designed to help chemists, geologists, and chemical and petroleum engineers make more accurate estimates of the crude value to specific refinery configurations, providing insight into optimum development and extraction schemes.

Download or read book Ground Motion and Engineering Seismology written by A.S. Cakmak and published by Elsevier. This book was released on 2015-08-11 with total page 633 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in the field of geotechnical earthquake engineering, earthquakes continue to cause loss of life and property in one part of the world or another. The Third International Conference on Soil Dynamics and Earthquake Engineering, Princeton University, Princeton, New Jersey, USA, 22nd to 24th June 1987, provided an opportunity for participants from all over the world to share their expertise to enhance the role of mechanics and other disciplines as they relate to earthquake engineering. The edited proceedings of the conference are published in four volumes. This volume covers: Seismicity and Tectonics in the Eastern Mediterranean, Seismic Waves in Soils and Geophysical Methods, Engineering Seismology, Dynamic Methods in Soil and Rock Mechanics, and Ground Motion. With its companion volumes, it is hoped that it will contribute to the further development of techniques, methods and innovative approaches in soil dynamics and earthquake engineering.

Download or read book Seismic Ground Response Analysis written by Nozomu Yoshida and published by Springer. This book was released on 2014-11-17 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art information on seismic ground response analysis, and is not only very valuable and useful for practitioners but also for researchers. The topics covered are related to the stages of analysis: 1. Input parameter selection, by reviewing the in-situ and laboratory tests used to determine dynamic soil properties as well as the methods to compile and model the dynamic soil properties from literature;2. Input ground motion; 3. Theoretical background on the equations of motion and methods for solving them; 4. The mechanism of damping and how this is modeled in the equations of motions; 5. Detailed analysis and discussion of results of selected case studies which provide valuable information on the problem of seismic ground response analysis from both a theoretical and practical point of view.

Download or read book Structural Analysis of Historical Constructions Anamnesis Diagnosis Therapy Controls written by Koen Van Balen and published by CRC Press. This book was released on 2016-11-03 with total page 1879 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls contains the papers presented at the 10th International Conference on Structural Analysis of Historical Constructions (SAHC2016, Leuven, Belgium, 13-15 September 2016). The main theme of the book is “Anamnesis, Diagnosis, Therapy, Controls”, which emphasizes the importance of all steps of a restoration process in order to obtain a thorough understanding of the structural behaviour of built cultural heritage. The contributions cover every aspect of the structural analysis of historical constructions, such as material characterization, structural modelling, static and dynamic monitoring, non-destructive techniques for on-site investigation, seismic behaviour, rehabilitation, traditional and innovative repair techniques, and case studies. The knowledge, insights and ideas in Structural Analysis of Historical Constructions. Anamnesis, diagnosis, therapy, controls make this book of abstracts and the corresponding, digital full-colour conference proceedings containing the full papers must-have literature for researchers and practitioners involved in the structural analysis of historical constructions.

Download or read book Unsaturated Soils Research Applications written by Nasser Khalili and published by CRC Press. This book was released on 2014-06-05 with total page 1850 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unsaturated Soils: Research and Applications contains 247 papers presented at 6th International Conference on Unsaturated Soils (UNSAT2014, Sydney, Australia, 2-4 July 2014). The two volumes provide an overview of recent experimental and theoretical advances in a wide variety of topics related to unsaturated soil mechanics: - Unsaturated Soil Behavior - Experimentation - Modelling - Case Histories - Geotechnical Engineering Problems - Multidisciplinary and New Areas Unsaturated Soils: Research and Applications presents a wealth of information, and is of interest to researchers and practising engineers in soil mechanics and geotechnical engineering. These proceedings are dedicated to Professor Geoffrey E. Blight (1934-2013), who passed in November 2013.

Download or read book Numerical Methods in Geotechnical Engineering IX written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-19 with total page 1656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering.

Download or read book Computer Methods and Recent Advances in Geomechanics written by Fusao Oka and published by CRC Press. This book was released on 2014-09-04 with total page 2049 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer Methods and Recent Advances in Geomechanics covers computer methods, material modeling and testing, applications to a wide range of geomechanical issues, and recent advances in various areas that may not necessarily involve computer methods, and will be of interest to researchers and engineers involved in geotechnical mechanics and geo-engineering.

Download or read book Nonlinear Stochastic Dynamic Engineering Systems written by Franz Ziegler and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: This symposium, held at Innsbruck/lgls on June 21-26, 1987, is the fifth in a series of IUTAM-Symposia on the application of stochastic methods in mechanics. The flrst two meetings in Warwick (1972) and Southhampton (1976) concentrated on the stability of stochastic dynamical systems and stochastic methods in dynamics, respectively. The third meeting in Frankfurt/Oder (1982) added aspects of reliability, while the fourth symposium in Stockholm (1984) dealt mainly with fatigue and fracture problems. The general theme of the present symposium is devoted to nonlinear stochastic dynamics of engineering systems which is believed of great importance for providing the tools for basic development and progress in various fields of mechanical-, structural- and aeronautical engineering, particularly in the areas of vehicle dynamics, multi-storey structural dynamics, systems identiflcation, offshore structural dynamics, nuclear structures under various stochastic loading conditions (i. e. wind-, earthquake-, parametric excitations, etc. ). The contributions collected in this volume cover a wide spectrum of topics ranging from more theoretical, analytical and numerical treatment to practical application in various flelds. The truly international character of the meeting is accomplished by 42 contributions and 86 participants from as many as 19 countries and hence, contributed to the original idea of IUTAM, which is to foster international cooperation. It should be recalled, that, for getting this cooperation started again after the First World War, Theodore von Kanmm and Tullio Levi-Civita called the world's flrst international (IUTAM) conference on hydro- and aerornechanics in 1922 in Innsbruck, Austria.

Download or read book Computational Modelling of Concrete Structures written by Nenad Bicanic and published by CRC Press. This book was released on 2014-03-04 with total page 1120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The EURO-C conference series (Split 1984, Zell am See 1990, Innsbruck 1994, Badgastein 1998, St Johann im Pongau 2003, Mayrhofen 2006, Schladming 2010, St Anton am Alberg 2014) brings together researchers and practising engineers concerned with theoretical, algorithmic and validation aspects associated with computational simulations of concrete and

Download or read book Computer Methods and Advances in Geomechanics written by Chandra S. Desai and published by Taylor & Francis US. This book was released on 1991 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Listing of SBIR Awardees for written by and published by . This book was released on 1986 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Modeling and Simulation Techniques in Structural Engineering written by Samui, Pijush and published by IGI Global. This book was released on 2016-08-12 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new and effective analytical and numerical models is essential to understanding the performance of a variety of structures. As computational methods continue to advance, so too do their applications in structural performance modeling and analysis. Modeling and Simulation Techniques in Structural Engineering presents emerging research on computational techniques and applications within the field of structural engineering. This timely publication features practical applications as well as new research insights and is ideally designed for use by engineers, IT professionals, researchers, and graduate-level students.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1977 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods in Geotechnical Engineering IX Volume 2 written by António S. Cardoso and published by CRC Press. This book was released on 2018-06-27 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods in Geotechnical Engineering IX contains 204 technical and scientific papers presented at the 9th European Conference on Numerical Methods in Geotechnical Engineering (NUMGE2018, Porto, Portugal, 25—27 June 2018). The papers cover a wide range of topics in the field of computational geotechnics, providing an overview of recent developments on scientific achievements, innovations and engineering applications related to or employing numerical methods. They deal with subjects from emerging research to engineering practice, and are grouped under the following themes: Constitutive modelling and numerical implementation Finite element, discrete element and other numerical methods. Coupling of diverse methods Reliability and probability analysis Large deformation – large strain analysis Artificial intelligence and neural networks Ground flow, thermal and coupled analysis Earthquake engineering, soil dynamics and soil-structure interactions Rock mechanics Application of numerical methods in the context of the Eurocodes Shallow and deep foundations Slopes and cuts Supported excavations and retaining walls Embankments and dams Tunnels and caverns (and pipelines) Ground improvement and reinforcement Offshore geotechnical engineering Propagation of vibrations Following the objectives of previous eight thematic conferences, (1986 Stuttgart, Germany; 1990 Santander, Spain; 1994 Manchester, United Kingdom; 1998 Udine, Italy; 2002 Paris, France; 2006 Graz, Austria; 2010 Trondheim, Norway; 2014 Delft, The Netherlands), Numerical Methods in Geotechnical Engineering IX updates the state-of-the-art regarding the application of numerical methods in geotechnics, both in a scientific perspective and in what concerns its application for solving practical boundary value problems. The book will be much of interest to engineers, academics and professionals involved or interested in Geotechnical Engineering. This is volume 2 of the NUMGE 2018 set.