Download or read book Silicon Nanowire Transistors written by Ahmet Bindal and published by Springer. This book was released on 2016-02-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI.
Download or read book Flash Lamp Annealing written by Lars Rebohle and published by . This book was released on 2019 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive survey of the technology of flash lamp annealing (FLA) for thermal processing of semiconductors. It gives a detailed introduction to the FLA technology and its physical background. Advantages, drawbacks and process issues are addressed in detail and allow the reader to properly plan and perform their own thermal processing. Moreover, this books gives a broad overview of the applications of flash lamp annealing, including a comprehensive literature survey. Several case studies of simulated temperature profiles in real material systems give the reader the necessary insight into the underlying physics and simulations. This book is a valuable reference work for both novice and advanced users.
Download or read book Nanowire Electronics written by Guozhen Shen and published by Springer. This book was released on 2018-11-23 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of recent advances in developing nanowires for building various kinds of electronic devices. Specifically the applications of nanowires in detectors, sensors, circuits, energy storage and conversion, etc., are reviewed in detail by the experts in this field. Growth methods of different kinds of nanowires are also covered when discussing the electronic applications. Through discussing these cutting edge researches, the future directions of nanowire electronics are identified.
Download or read book Introduction to Magnetism and Magnetic Materials written by David Jiles and published by CRC Press. This book was released on 2015-09-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: A long overdue update, this edition of Introduction to Magnetism and Magnetic Materials is a complete revision of its predecessor. While it provides relatively minor updates to the first two sections, the third section contains vast updates to reflect the enormous progress made in applications in the past 15 years, particularly in magnetic recordin
Download or read book Properties and Applications of Silicon Carbide written by Rosario Gerhardt and published by BoD – Books on Demand. This book was released on 2011-04-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, we explore an eclectic mix of articles that highlight some new potential applications of SiC and different ways to achieve specific properties. Some articles describe well-established processing methods, while others highlight phase equilibria or machining methods. A resurgence of interest in the structural arena is evident, while new ways to utilize the interesting electromagnetic properties of SiC continue to increase.
Download or read book Anisotropic Nanomaterials written by Quan Li and published by Springer. This book was released on 2015-06-09 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book anisotropic one-dimensional and two-dimensional nanoscale building blocks and their assembly into fascinating and qualitatively new functional structures embracing both hard and soft components are explained. Contributions from leading experts regarding important aspects like synthesis, assembly, properties and applications of the above materials are compiled into a reference book. The anisotropy, i.e. the direction-dependent physical properties, of materials is fascinating and elegant and has sparked the quest for anisotropic materials with useful properties. With such a curiosity, material scientists have ventured into the realm of nanometer length scale and have explored the anisotropic nanoscale building blocks such as metallic and nonmetallic particles as well as organic molecular aggregates. It turns out that the anisotropic nanoscale building blocks, in addition to direction-dependent properties, exhibit dimension and morphology dependence of physical properties. Moreover, ordered arrays of anisotropic nanoscale building blocks furnish novel properties into the resulting system which would be entirely different from the properties of individual ones. Undoubtedly, these promising properties have qualified them as enabling building blocks of 21st century materials science, nanoscience and nanotechnology. Readers will find this book professionally valuable and intellectually stimulating in the rapidly emerging area of anisotropic nanomaterials. Quan Li, Ph.D., is Director of the Organic Synthesis and Advanced Materials Laboratory at the Liquid Crystal Institute of Kent State University, where he is also Adjunct Professor in the Chemical Physics Interdisciplinary Program. He has directed research projects funded by US Air Force Research Laboratory (AFRL), US Air Force Office of Scientific Research (AFSOR), US Army Research Office (ARO), US Department of Defense Multidisciplinary University Research Initiative (DoD MURI), US National Science Foundation (NSF), US Department of Energy (DOE), US National Aeronautics and Space Administration (NASA), Ohio Third Frontier, and Samsung Electronics, among others.
Download or read book Nanowire Field Effect Transistors Principles and Applications written by Dae Mann Kim and published by Springer Science & Business Media. This book was released on 2013-10-23 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Nanowire Field Effect Transistor: Basic Principles and Applications” places an emphasis on the application aspects of nanowire field effect transistors (NWFET). Device physics and electronics are discussed in a compact manner, together with the p-n junction diode and MOSFET, the former as an essential element in NWFET and the latter as a general background of the FET. During this discussion, the photo-diode, solar cell, LED, LD, DRAM, flash EEPROM and sensors are highlighted to pave the way for similar applications of NWFET. Modeling is discussed in close analogy and comparison with MOSFETs. Contributors focus on processing, electrostatic discharge (ESD) and application of NWFET. This includes coverage of solar and memory cells, biological and chemical sensors, displays and atomic scale light emitting diodes. Appropriate for scientists and engineers interested in acquiring a working knowledge of NWFET as well as graduate students specializing in this subject.
Download or read book Introduction to Thermoelectricity written by H. Julian Goldsmid and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Thermoelectricity is the latest work by Professor Julian Goldsmid drawing on his 55 years experience in the field. The theory of the thermoelectric and related phenomena is presented in sufficient detail to enable researchers to understand their observations and develop improved thermoelectric materials. The methods for the selection of materials and their improvement are discussed. Thermoelectric materials for use in refrigeration and electrical generation are reviewed. Experimental techniques for the measurement of properties and for the production of thermoelements are described. Special emphasis is placed on nanotechnology which promises to yield great improvements in the efficiency of thermoelectric devices. Chapters are also devoted to transverse thermoelectric effects and thermionic energy conversion, both techniques offering the promise of important applications in the future.
Download or read book Transmission Electron Microscopy written by C. Barry Carter and published by Springer. This book was released on 2016-08-24 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a companion volume to Transmission Electron Microscopy: A Textbook for Materials Science by Williams and Carter. The aim is to extend the discussion of certain topics that are either rapidly changing at this time or that would benefit from more detailed discussion than space allowed in the primary text. World-renowned researchers have contributed chapters in their area of expertise, and the editors have carefully prepared these chapters to provide a uniform tone and treatment for this exciting material. The book features an unparalleled collection of color figures showcasing the quality and variety of chemical data that can be obtained from today’s instruments, as well as key pitfalls to avoid. As with the previous TEM text, each chapter contains two sets of questions, one for self assessment and a second more suitable for homework assignments. Throughout the book, the style follows that of Williams & Carter even when the subject matter becomes challenging—the aim is always to make the topic understandable by first-year graduate students and others who are working in the field of Materials Science Topics covered include sources, in-situ experiments, electron diffraction, Digital Micrograph, waves and holography, focal-series reconstruction and direct methods, STEM and tomography, energy-filtered TEM (EFTEM) imaging, and spectrum imaging. The range and depth of material makes this companion volume essential reading for the budding microscopist and a key reference for practicing researchers using these and related techniques.
Download or read book Investigation on SiGe Selective Epitaxy for Source and Drain Engineering in 22 nm CMOS Technology Node and Beyond written by Guilei Wang and published by Springer Nature. This book was released on 2019-09-20 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the SiGe source and drain (S/D) technology in the context of advanced CMOS, and addresses both device processing and epitaxy modelling. As the CMOS technology roadmap calls for continuously downscaling traditional transistor structures, controlling the parasitic effects of transistors, e.g. short channel effect, parasitic resistances and capacitances is becoming increasingly difficult. The emergence of these problems sparked a technological revolution, where a transition from planar to three-dimensional (3D) transistor design occurred in the 22nm technology node. The selective epitaxial growth (SEG) method has been used to deposit SiGe as stressor material in S/D regions to induce uniaxial strain in the channel region. The thesis investigates issues of process integration in IC production and concentrates on the key parameters of high-quality SiGe selective epitaxial growth, with a special focus on its pattern dependency behavior and on key integration issues in both 2D and 3D transistor structures, the goal being to improve future applications of SiGe SEG in advanced CMOS.
Download or read book Crystallization written by J W Mullin and published by Elsevier. This book was released on 2001-05-09 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the first publication of this definitive work nearly 40 years ago, this fourth edition has been completely rewritten. Crystallization is used at some stage in nearly all process industries as a method of production, purification or recovery of solid materials. Incorporating all the recent developments and applications of crystallization technology, Crystallization gives clear accounts of the underlying principles, a review of the past and current research themes and guidelines for equipment and process design. This new edition introduces and enlarges upon such subjects as: - Control and Separation of polymorphs and chiral crystals - Micro- and macro-mixing and the use of computer fluid dynamics - Seeding and secondary nucleation in batch crystallization processes - Incorporation of upstream and downstream requirements into design procedures for crystallization plant - Computer-aided molecular design and its use in crystal habit modifier selection Crystallization provides a comprehensive overview of the subject and will prove invaluable to all chemical engineers and industrial chemists in the process industries as well as crystallization workers and students in industry and academia. Crystallization is written with the precision and clarity of style that is John Mullin's hallmark - a special feature being the large number of appendices that provide relevant physical property data. - Covers all new developments and trends in crystallization - Comprehensive coverage of subject area
Download or read book The Physics of Phonons written by Gyaneshwar P. Srivastava and published by Routledge. This book was released on 2019-07-16 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: There have been few books devoted to the study of phonons, a major area of condensed matter physics. The Physics of Phonons is a comprehensive theoretical discussion of the most important topics, including some topics not previously presented in book form. Although primarily theoretical in approach, the author refers to experimental results wherever possible, ensuring an ideal book for both experimental and theoretical researchers. The author begins with an introduction to crystal symmetry and continues with a discussion of lattice dynamics in the harmonic approximation, including the traditional phenomenological approach and the more recent ab initio approach, detailed for the first time in this book. A discussion of anharmonicity is followed by the theory of lattice thermal conductivity, presented at a level far beyond that available in any other book. The chapter on phonon interactions is likewise more comprehensive than any similar discussion elsewhere. The sections on phonons in superlattices, impure and mixed crystals, quasicrystals, phonon spectroscopy, Kapitza resistance, and quantum evaporation also contain material appearing in book form for the first time. The book is complemented by numerous diagrams that aid understanding and is comprehensively referenced for further study. With its unprecedented wide coverage of the field, The Physics of Phonons will be indispensable to all postgraduates, advanced undergraduates, and researchers working on condensed matter physics.
Download or read book Magnetic Multilayers written by Lawrence H Bennett and published by World Scientific. This book was released on 1994-12-16 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on an increasingly important area of materials science and technology, namely, the fabrication and properties of artificial materials where slabs of magnetized materials are sandwiched between slabs of nonmagnetized materials. It includes reviews by experts on the theory and descriptions of the various experimental techniques such as those using nuclear or electron spin probes, as well as optical, X-ray or neutron probes. It also reviews potential applications such as the giant magnetoresistance, and one specialized preparation technique, the electrodeposition. The various chapters are tutorial in nature, making the subject accessible to nonspecialists, as well as useful to researchers in the field.
Download or read book Semiconductor On Insulator Materials for Nanoelectronics Applications written by Alexei Nazarov and published by Springer Science & Business Media. This book was released on 2011-03-03 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Semiconductor-On-Insulator Materials for NanoElectronics Applications” is devoted to the fast evolving field of modern nanoelectronics, and more particularly to the physics and technology of nanoelectronic devices built on semiconductor-on-insulator (SemOI) systems. The book contains the achievements in this field from leading companies and universities in Europe, USA, Brazil and Russia. It is articulated around four main topics: 1. New semiconductor-on-insulator materials; 2. Physics of modern SemOI devices; 3. Advanced characterization of SemOI devices; 4. Sensors and MEMS on SOI. "Semiconductor-On-Insulator Materials for NanoElectonics Applications” is useful not only to specialists in nano- and microelectronics but also to students and to the wider audience of readers who are interested in new directions in modern electronics and optoelectronics.
Download or read book Swift Heavy Ions for Materials Engineering and Nanostructuring written by Devesh Kumar Avasthi and published by Springer Science & Business Media. This book was released on 2011-05-24 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ion beams have been used for decades for characterizing and analyzing materials. Now energetic ion beams are providing ways to modify the materials in unprecedented ways. This book highlights the emergence of high-energy swift heavy ions as a tool for tailoring the properties of materials with nanoscale structures. Swift heavy ions interact with materials by exciting/ionizing electrons without directly moving the atoms. This opens a new horizon towards the 'so-called' soft engineering. The book discusses the ion beam technology emerging from the non-equilibrium conditions and emphasizes the power of controlled irradiation to tailor the properties of various types of materials for specific needs.
Download or read book Understanding Modern Transistors and Diodes written by David L. Pulfrey and published by Cambridge University Press. This book was released on 2010-01-28 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a concise, easy-to-read style, this text for senior undergraduate and graduate courses covers all key topics thoroughly. It is also a useful self-study guide for practising engineers who need a complete, up-to-date review of the subject. Key features: • Rigorous theoretical treatment combined with practical detail • A theoretical framework built up systematically from the Schrödinger Wave Equation and the Boltzmann Transport Equation • Covers MOSFETS, HBTs and HJFETS • Uses the PSP model for MOSFETS • Rigorous treatment of device capacitance • Describes the operation of modern, high-performance transistors and diodes • Evaluates the suitability of various transistor types and diodes for specific modern applications • Covers solar cells and LEDs and their potential impact on energy generation and reduction • Includes a chapter on nanotransistors to prepare students and professionals for the future • Provides results of detailed numerical simulations to compare with analytical solutions • End-of-chapter exercises • Online lecture slides for undergraduate and graduate courses
Download or read book Applications of Chalcogenides S Se and Te written by Gurinder Kaur Ahluwalia and published by Springer. This book was released on 2018-06-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces readers to a wide range of applications for elements in Group 16 of the periodic table, such as, optical fibers for communication and sensing, X-ray imaging, electrochemical sensors, data storage devices, biomedical applications, photovoltaics and IR detectors, the rationale for these uses, the future scope of their applications, and expected improvements to existing technologies. Following an introductory section, the book is broadly divided into three parts—dealing with Sulfur, Selenium, and Tellurium. The sections cover the basic structure of the elements and their compounds in bulk and nanostructured forms; properties that make these useful for various applications, followed by applications and commercial products. As the global technology revolution necessitates the search for new materials and more efficient devices in the electronics and semiconductor industry, Applications of Chalcogenides: S, Se, and Te is an ideal book for a wide range of readers in industry, government and academic research facilities looking beyond silicon for materials used in the electronic and optoelectronic industry as well as biomedical applications.
