Download or read book Heterojunction Solar Cells a Si c Si written by Thomas Mueller and published by Logos Verlag Berlin GmbH. This book was released on 2009 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main focus of the present work is related to the optimization of heterojunction solar cells. The key roles in obtaining high efficient heterojunction solar cells are mainly the plasma enhanced chemical vapor deposition of very low defect layers, and the sufficient surface passivation of all interfaces. In heterojunction solar cells, the a-Si: H/c-Si hetero-interface is of significant importance, since the hetero-interface characteristics directly affect the junction properties and thus solar cell efficiency. In this work, the deposition and film properties of various hydrogenated amorphous silicon alloys, such as a-SiC: H, a-SiO_x: H, and muc-Si: H (standard a-Si: H is used as reference), are employed. Special attention is paid to (i) the front and back surface passivation of the bulk material by high-quality wide-gap amorphous silicon suboxides (a-SiO_x: H), and (ii) the influence of wide-gap high-quality a-Si- and muc-Si-based alloys for use as emitter and back-surface-

Download or read book High Efficiency Solar Cells written by Xiaodong Wang and published by Springer Science & Business Media. This book was released on 2013-11-01 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: As part of the effort to increase the contribution of solar cells (photovoltaics) to our energy mix, this book addresses three main areas: making existing technology cheaper, promoting advanced technologies based on new architectural designs, and developing new materials to serve as light absorbers. Leading scientists throughout the world create a fundamental platform for knowledge sharing that combines the physics, materials, and device architectures of high-efficiency solar cells. While providing a comprehensive introduction to the field, the book highlights directions for further research, and is intended to stimulate readers’ interest in the development of novel materials and technologies for solar energy applications.

Download or read book Chemical Vapor Deposition written by S Neralla and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of chemical vapor deposition (CVD) methods and recent advances in developing novel materials for application in various fields. CVD has now evolved into the most widely used technique for growth of thin films in electronics industry. Several books on CVD methods have emerged in the past, and thus the scope of this book goes beyond providing fundamentals of the CVD process. Some of the chapters included highlight current limitations in the CVD methods and offer alternatives in developing coatings through overcoming these limitations.

Download or read book Physics of Semiconductor Devices written by V. K. Jain and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this workshop is to spread the vast amount of information available on semiconductor physics to every possible field throughout the scientific community. As a result, the latest findings, research and discoveries can be quickly disseminated. This workshop provides all participating research groups with an excellent platform for interaction and collaboration with other members of their respective scientific community. This workshop’s technical sessions include various current and significant topics for applications and scientific developments, including • Optoelectronics • VLSI & ULSI Technology • Photovoltaics • MEMS & Sensors • Device Modeling and Simulation • High Frequency/ Power Devices • Nanotechnology and Emerging Areas • Organic Electronics • Displays and Lighting Many eminent scientists from various national and international organizations are actively participating with their latest research works and also equally supporting this mega event by joining the various organizing committees.

Download or read book Amorphous and Heterogeneous Silicon Thin Films written by and published by . This book was released on 2002 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Metallurgical Process Design written by George E. Totten and published by CRC Press. This book was released on 2004-05-25 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviewing an extensive array of procedures in hot and cold forming, casting, heat treatment, machining, and surface engineering of steel and aluminum, this comprehensive reference explores a vast range of processes relating to metallurgical component design-enhancing the production and the properties of engineered components while reducing manufacturing costs. It surveys the role of computer simulation in alloy design and its impact on material structure and mechanical properties such as fatigue and wear. It also discusses alloy design for various materials, including steel, iron, aluminum, magnesium, titanium, super alloy compositions and copper.

Download or read book Handbook of Silicon Photonics written by Laurent Vivien and published by Taylor & Francis. This book was released on 2016-04-19 with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of integrated silicon photonic circuits has recently been driven by the Internet and the push for high bandwidth as well as the need to reduce power dissipation induced by high data-rate signal transmission. To reach these goals, efficient passive and active silicon photonic devices, including waveguide, modulators, photodetectors,

Download or read book New Trends and Potentialities of ToF SIMS in Surface Studies written by Jacek Grams and published by Nova Publishers. This book was released on 2007 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest trends and applications of time-of-flight secondary ion mass spectrometry (ToF-SIMS). It includes research and applications of the new primary ion guns. It also describes new possibilities of mass spectrometers and instrumentation development.

Download or read book Thin Film Silicon Solar Cells written by Arvind Shah and published by EPFL Press. This book was released on 2010-08-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic technology has now developed to the extent that it is close to fulfilling the vision of a "solar-energy world," as devices based on this technology are becoming efficient, low-cost and durable. This book provides a comprehensive treatment of thin-film silicon, a prevalent PV material, in terms of its semiconductor nature, starting out with the physical properties, but concentrating on device applications. A special emphasis is given to amorphous silicon and microcrystalline silicon as photovoltaic materials, along with a model that allows these systems to be physically described in the simplest manner possible, thus allowing the student or scientist/engineer entering the field of thin-film electronics to master a few basic concepts that are distinct from those in the field of conventional semiconductors. The main part of the book deals with solar cells and modules by illustrating the basic functioning of these devices, along with their limitations, design optimization, testing and fabrication methods. Among the manufacturing processes discussed are plasma-assisted and hot-wire deposition, sputtering, and structuring techniques.

Download or read book Silicon Solar Cells written by Martin A. Green and published by . This book was released on 1995 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.

Download or read book Thin Film Solar Cells written by Jef Poortmans and published by John Wiley & Sons. This book was released on 2006-10-02 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thin-film solar cells are either emerging or about to emerge from the research laboratory to become commercially available devices finding practical various applications. Currently no textbook outlining the basic theoretical background, methods of fabrication and applications currently exist. Thus, this book aims to present for the first time an in-depth overview of this topic covering a broad range of thin-film solar cell technologies including both organic and inorganic materials, presented in a systematic fashion, by the scientific leaders in the respective domains. It covers a broad range of related topics, from physical principles to design, fabrication, characterization, and applications of novel photovoltaic devices.

Download or read book Advanced Microsystems for Automotive Applications 2003 written by Jürgen Valldorf and published by Springer Science & Business Media. This book was released on 2007-12-22 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystems are an important factor that contribute to an automobile model's success. To meet the customer's desire for safety, convenience and vehicle economy, and to satisfy environmental standards, microsystems play a critical factor. Microsystems applications (MST) have already resulted in improved performance and better value for money. But the advances implemented reveal only the beginning of a revolution in the vehicle sector, which aims at a complete transition from the mechanically driven automobile system to a mechanically based but ICT-driven system. The selected contributions from AMAA 2003 treat safety (both preventive and protective), powertrain (online measurement and control of engine and transmission subsystems), comfort and HMI (systems to enhance the comfort of passengers and human machine interface issues), and networked Vehicle (all aspects of intra car systems and ambient communication networks).

Download or read book JJAP written by and published by . This book was released on 2007 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Carbon Nanomaterials Sourcebook written by Klaus D. Sattler and published by CRC Press. This book was released on 2018-09-03 with total page 1003 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Carbon Nanomaterials Sourcebook contains extensive, interdisciplinary coverage of carbon nanomaterials, encompassing the full scope of the field—from physics, chemistry, and materials science to molecular biology, engineering, and medicine—in two comprehensive volumes. Written in a tutorial style, this second volume of the sourcebook: Focuses on nanoparticles, nanocapsules, nanofibers, nanoporous structures, and nanocomposites Describes the fundamental properties, growth mechanisms, and processing of each nanomaterial discussed Explores functionalization for electronic, energy, biomedical, and environmental applications Showcases materials with exceptional properties, synthesis methods, large-scale production techniques, and application prospects Provides the tools necessary for understanding current and future technology developments, including important equations, tables, and graphs Each chapter is dedicated to a different type of carbon nanomaterial and addresses three main areas: formation, properties, and applications. This setup allows for quick and easy search, making the Carbon Nanomaterials Sourcebook: Nanoparticles, Nanocapsules, Nanofibers, Nanoporous Structures, and Nanocomposites a must-have reference for scientists and engineers.

Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2007 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: