Download or read book Silicon Devices and Process Integration written by Badih El-Kareh and published by Springer Science & Business Media. This book was released on 2009-01-09 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon Devices and Process Integration covers state-of-the-art silicon devices, their characteristics, and their interactions with process parameters. It serves as a comprehensive guide which addresses both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. The book is compiled from the author’s industrial and academic lecture notes and reflects years of experience in the development of silicon devices. Features include: A review of silicon properties which provides a foundation for understanding the device properties discussion, including mobility-enhancement by straining silicon; State-of-the-art technologies on high-K gate dielectrics, low-K dielectrics, Cu interconnects, and SiGe BiCMOS; CMOS-only applications, such as subthreshold current and parasitic latch-up; Advanced Enabling processes and process integration. This book is written for engineers and scientists in semiconductor research, development and manufacturing. The problems at the end of each chapter and the numerous charts, figures and tables also make it appropriate for use as a text in graduate and advanced undergraduate courses in electrical engineering and materials science.
Download or read book Silicon Analog Components written by Badih El-Kareh and published by Springer. This book was released on 2019-08-07 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers modern analog components, their characteristics, and interactions with process parameters. It serves as a comprehensive guide, addressing both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. Based on the authors’ extensive experience in the development of analog devices, this book is intended for engineers and scientists in semiconductor research, development and manufacturing. The problems at the end of each chapter and the numerous charts, figures and tables also make it appropriate for use as a text in graduate and advanced undergraduate courses in electrical engineering and materials science. Enables engineers to understand analog device physics, and discusses important relations between process integration, device design, component characteristics, and reliability; Describes in step-by-step fashion the components that are used in analog designs, the particular characteristics of analog components, while comparing them to digital applications; Explains the second-order effects in analog devices, and trade-offs between these effects when designing components and developing an integrated process for their manufacturing.
Download or read book Silicon Components and Processes Self Study written by Badih El-Kareh and published by Springer. This book was released on 2024-06-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is one of a series of five volumes forming an integrated, self-study course on silicon device physics, modes of operation, characterization, and fabrication. The series is based on many years of the author’s experience in academic and industrial teaching of semiconductors. The books are suitable for both class-teaching and self-study. The authors have designed the content to enable readers to be introduced gradually to semiconductors, in particular silicon components. The presentation includes many illustrations, practical examples, review questions and problems at the end of each chapter. Answers to review questions and solutions to problems will be provided for “self-check”.
Download or read book Silicon Processing for the VLSI Era Process integration written by Stanley Wolf and published by . This book was released on 1986 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ULSI Process Integration III written by Electrochemical Society. Meeting and published by The Electrochemical Society. This book was released on 2003 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ULSI Process Integration 7 written by C. Claeys and published by The Electrochemical Society. This book was released on 2011 with total page 429 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polycrystalline Silicon for Integrated Circuit Applications written by Ted Kamins and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have seen silicon integrated circuits enter into an increasing number of technical and consumer applications, until they now affect everyday life, as well as technical areas. Polycrystalline silicon has been an important component of silicon technology for nearly two decades, being used first in MOS integrated circuits and now becoming pervasive in bipolar circuits, as well. During this time a great deal of informa tion has been published about polysilicon. A wide range of deposition conditions has been used to form films exhibiting markedly different properties. Seemingly contradictory results can often be explained by considering the details of the structure formed. This monograph is an attempt to synthesize much of the available knowledge about polysilicon. It represents an effort to interrelate the deposition, properties, and applications of polysilicon so that it can be used most effectively to enhance device and integrated-circuit perfor mance. As device performance improves, however, some of the proper ties of polysilicon are beginning to restrict the overall performance of integrated circuits, and the basic limitations of the properties of polysili con also need to be better understood to minimize potential degradation of circuit behavior.
Download or read book Process Technology for Silicon Carbide Devices written by Carl-Mikael Zetterling and published by IET. This book was released on 2002 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains why SiC is so useful in electronics, gives clear guidance on the various processing steps (growth, doping, etching, contact formation, dielectrics etc) and describes how these are integrated in device manufacture.
Download or read book Materials Process Integration for MEMS written by Francis E. H. Tay and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of materials and process integration for MEMS research has an extensive past as well as a long and promising future. Researchers, academicians and engineers from around the world are increasingly devoting their efforts on the materials and process integration issues and opportunities in MEMS devices. These efforts are crucial to sustain the long-term growth of the MEMS field. The commercial MEMS community is heavily driven by the push for profitable and sustainable products. In the course of establishing high volume and low-cost production processes, the critical importance of materials properties, behaviors, reliability, reproducibility, and predictability, as well as process integration of compatible materials systems become apparent. Although standard IC fabrication steps, particularly lithographic techniques, are leveraged heavily in the creation of MEMS devices, additional customized and novel micromachining techniques are needed to develop sophisticated MEMS structures. One of the most common techniques is bulk micromachining, by which micromechanical structures are created by etching into the bulk of the substrates with either anisotropic etching with strong alk:ali solution or deep reactive-ion etching (DRIB). The second common technique is surface micromachining, by which planar microstructures are created by sequential deposition and etching of thin films on the surface of the substrate, followed by a fmal removal of sacrificial layers to release suspended structures. Other techniques include deep lithography and plating to create metal structures with high aspect ratios (LIGA), micro electrodischarge machining (J.
Download or read book Semiconductor Silicon Crystal Technology written by Fumio Shimura and published by Elsevier. This book was released on 2012-12-02 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor Silicon Crystal Technology provides information pertinent to silicon, which is the dominant material in the semiconductor industry. This book discusses the technology of integrated circuits (ICs) in electronic materials manufacturer. Comprised of eight chapters, this book provides an overview of the basic science, silicon materials, IC device fabrication processes, and their interaction for enhancing both the processes and materials. This text then proceeds with a discussion of the atomic structure and bonding mechanisms in order to understand the nature and formation of crystal structures, which are the fundamentals of material science. Other chapters consider the technological crystallography and classify natural crystal morphologies based on observation. The final chapter deals with the interrelationships among silicon material characteristics, circuit design, and IC fabrication in order to ensure the fabrication of very-large-scale-integration/ultra-large-scale-integration circuits. This book is a valuable resource for graduate students, physicists, engineers, materials scientists, and professionals involved in semiconductor industry.
Download or read book ULSI Process Integration 6 written by C. Claeys and published by The Electrochemical Society. This book was released on 2009-09 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: ULSI Process Integration 6 covers all aspects of process integration. Sections are devoted to 1) Device Technologies, 2) Front-end-of-line integration (gate stacks, shallow junctions, dry etching, etc.), 3) Back-end-of-line integration (CMP, low-k, Cu interconnect, air-gaps, 3D packaging, etc.), 4) Alternative channel technologies (Ge, III-V, hybrid integration), and 5) Emerging technologies (CNT, graphene, polymer electronics, nanotubes).
Download or read book ULSI Process Integration 9 written by C. Claeys and published by The Electrochemical Society. This book was released on 2015 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Silicon Devices written by Kenneth A. Jackson and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon is the most important material for the electronics industry. In modern microelectronics silicon devices like diodes and transistors play a major role, and devices like photodetectors or solar cells gain ever more importance. This concise handbook deals with one of the most important topics for the electronics industry. World renowned authors have contributed to this unique overview of the processing of silicon and silicon devices.
Download or read book ULSI Process Integration II written by Cor L. Claeys and published by The Electrochemical Society. This book was released on 2001 with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ULSI Process Integration written by Cor L. Claeys and published by The Electrochemical Society. This book was released on 1999 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Silicon Based MEMS Materials and Technologies written by Markku Tilli and published by Elsevier. This book was released on 2009-12-08 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to MEMS materials, technologies and manufacturing, examining the state of the art with a particular emphasis on current and future applications. Key topics covered include: Silicon as MEMS material Material properties and measurement techniques Analytical methods used in materials characterization Modeling in MEMS Measuring MEMS Micromachining technologies in MEMS Encapsulation of MEMS components Emerging process technologies, including ALD and porous silicon Written by 73 world class MEMS contributors from around the globe, this volume covers materials selection as well as the most important process steps in bulk micromachining, fulfilling the needs of device design engineers and process or development engineers working in manufacturing processes. It also provides a comprehensive reference for the industrial R&D and academic communities. Veikko Lindroos is Professor of Physical Metallurgy and Materials Science at Helsinki University of Technology, Finland. Markku Tilli is Senior Vice President of Research at Okmetic, Vantaa, Finland. Ari Lehto is Professor of Silicon Technology at Helsinki University of Technology, Finland. Teruaki Motooka is Professor at the Department of Materials Science and Engineering, Kyushu University, Japan. Provides vital packaging technologies and process knowledge for silicon direct bonding, anodic bonding, glass frit bonding, and related techniques Shows how to protect devices from the environment and decrease package size for dramatic reduction of packaging costs Discusses properties, preparation, and growth of silicon crystals and wafers Explains the many properties (mechanical, electrostatic, optical, etc), manufacturing, processing, measuring (incl. focused beam techniques), and multiscale modeling methods of MEMS structures
Download or read book Silicon Processing for the VLSI Era written by Stanley Wolf and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
