Download or read book Silica Aerogel an Alternative to Micromachined Air Gap for Thermal Insulation of Microheaters written by Seyed Mohammad Seyed Jalali Aghdam and published by . This book was released on 2015 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Translucent Silica Aerogel written by Cinzia Buratti and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silica translucent aerogels are unique materials able to improve the thermal insulation performance of buildings without compromising daylight transmission. The aim of the book is to give a general overview on state of the art research on translucent aerogels and their applications in buildings and to provide a data set about thermal and physical properties, useful in buildings' energy performance simulation and design.Silica aerogels are nanostructured solid materials made of approximately 96% air and 4% silica. They show a thermal conductivity in the 0.012-0.020 W/mK range and excellent optical properties, especially visible transmission. They come in granular and monolithic form. Granular aerogels are relatively easy to produce and less expensive than monolithic panes, but show worse optical and thermal performance. Monolithic aerogels enable vision through the material, but their fabrication process is not developed at an industrial scale.The book collects the contributions of experts in the field of translucent aerogels from all over the world. The contents of the eight chapters are detailed as follows:Chapter 1 is the contribution from Union College, Schenectady (USA). The chapter reviews the chemical approaches to silica wet gels preparation, the drying methods used to yield monoliths, and the challenges and limitations associated with its production.Chapter 2 is a contribution from EMPA, Dübendorf (Switzerland). It is a review of current state of the art research on silica aerogel granulate production, including raw materials selection, hydrophobization strategies, and drying methodologies. Chapter 3 is a contribution from Takenaka Corporation, Tokyo (Japan). The main techniques for the optical properties evaluation are described and data are provided. An original application of translucent aerogels in buildings and future research topics are also proposed.Chapter 4 is a contribution from Recep Tayyip Erdogan University, Rize and Ataturk University, Erzurum (Turkey). A review of the thermal properties of aerogels is provided, highlighting their better performance when compared to conventional and superinsulation materials.Chapter 5 is a contribution from the University of Perugia, Perugia (Italy). The acoustic properties of both granular and monolithic systems are investigated. For example, the influence of granule size and layer thickness that is deepened for granular aerogels is discussed, while for the monolithic form, the little data that is currently available is reported on. Chapter 6 is a contribution from the University of Tuscia, Viterbo (Italy) and Buro Happold Ltd, London (UK). It is focused on Life Cycle Assessment of silica aerogel, showing the research challenges in understanding its environmental impact, lower than the one of conventional thermal insulating glazing systems.Chapter 7 is a contribution from the University of Lyon and INSA-Lyon, Lyon (France). An overview of measurement methods and modeling tools available in literature is provided and a summary of the main mechanical properties of both monolithic and granular aerogels is reported on.Chapter 8 is a contribution from the Norwegian University of Science and Technology, Trondheim and SINTEF, Trondheim (Norway). Authors present their experimental investigations on various aerogel systems in different building envelopes (new aerogel glass material, aerogel-incorporated concrete, and so forth).

Download or read book Microreaction Technology written by M. Matlosz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: IMRET 5 featured more than 80 oral and poster communications, covering the entire interdisciplinary field from design, production, modeling and characterization of microreactor devices to application of microstructured systems for production, energy and transportation, including many analytical and biological applications. A particularly strong topic was the investigation of the potential of microstructuring of reactors and systems components for process intensification. Perspectives of combining local, in situ, data acquisition with appropriate microstructuring of actuators and components within chemical and biological devices were explored in order to enhance process performance and facilitate process control.

Download or read book Micro and Smart Systems written by G. K. Ananthasuresh and published by Wiley Global Education. This book was released on 2012-04-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microsystems are systems that integrate, on a chip or a package, one or more of many different categories of microdevices. As the past few decades were dominated by the development and rapid miniaturization of circuitry, the current and coming decades are witnessing a similar revolution in the miniaturization of sensors, actuators, and electronics; and communication, control and power devices. Applications ranging from biomedicine to warfare are driving rapid innovation and growth in the field, which is pushing this topic into graduate and undergraduate curricula in electrical, mechanical, and biomedical engineering.

Download or read book Sensor Systems Simulations written by Willem Dirk van Driel and published by Springer. This book was released on 2019-06-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes for readers various technical outcomes from the EU-project IoSense. The authors discuss sensor integration, including LEDs, dust sensors, LIDAR for automotive driving and 8 more, demonstrating their use in simulations for the design and fabrication of sensor systems. Readers will benefit from the coverage of topics such as sensor technologies for both discrete and integrated innovative sensor devices, suitable for high volume production, electrical, mechanical, security and software resources for integration of sensor system components into IoT systems and IoT-enabling systems, and IoT sensor system reliability. Describes from component to system level simulation, how to use the available simulation techniques for reaching a proper design with good performance; Explains how to use simulation techniques such as Finite Elements, Multi-body, Dynamic, stochastics and many more in the virtual design of sensor systems; Demonstrates the integration of several sensor solutions (thermal, dust, occupancy, distance, awareness and more) into large-scale system solutions in several industrial domains (Lighting, automotive, transport and more); Includes state-of-the-art simulation techniques, both multi-scale and multi-physics, for use in the electronic industry.

Download or read book Micromanufacturing and Nanotechnology written by Nitaigour P. Mahalik and published by Springer Science & Business Media. This book was released on 2006-01-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromanufacturing and Nanotechnology is an emerging technological infrastructure and process that involves manufacturing of products and systems at the micro and nano scale levels. Development of micro and nano scale products and systems are underway due to the reason that they are faster, accurate and less expensive. Moreover, the basic functional units of such systems possesses remarkable mechanical, electronic and chemical properties compared to the macro-scale counterparts. Since this infrastructure has already become the prefered choice for the design and development of next generation products and systems it is now necessary to disseminate the conceptual and practical phenomenological know-how in a broader context. This book incorporates a selection of research and development papers. Its scope is the history and background, underlynig design methodology, application domains and recent developments.

Download or read book Fundamentals and Applications of Microfluidics written by Nam-Trung Nguyen and published by Integrated Microsystems. This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, the Artech House bestseller, Fundamentals and Applications of Microfluidics, provides engineers and students with the most complete and current coverage of this cutting-edge field. This revised and expanded edition provides updated discussions throughout and features critical new material on microfluidic power sources, sensors, cell separation, organ-on-chip and drug delivery systems, 3D culture devices, droplet-based chemical synthesis, paper-based microfluidics for point-of-care, ion concentration polarization, micro-optofluidics and micro-magnetofluidics. The book shows how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. Readers find discussions on a wide range of applications, including fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. Professionals get practical guidance in choosing the best fabrication and enabling technology for a specific microfluidic application, and learn how to design a microfluidic device. Moreover, engineers get simple calculations, ready-to-use data tables, and rules of thumb that help them make design decisions and determine device characteristics quickly. addressed at the design stage to reduce the risk of failures in the field is presented. The book includes technical details of all state-of-the-art Li-on energy storage subsystems and their requirements, and provides a system designer a single resource detailing all of the common issues navigated when using Li-ion batteries to reduce the risk of field failures. The book details the various industry standards that are applicable to the subsystems of Li-ion energy storage systems and how the requirements of these standards may impact the design of their system. Checklists are included to help readers evaluate their own battery system designs and identify gaps in the designs that increase the risk of field failures. The book is packed with numerous examples of issues that have caused field failures and how a proper design/assembly process could have reduced the risk of these failures.

Download or read book Handbook of Modern Sensors written by Jacob Fraden and published by Springer Science & Business Media. This book was released on 2006-04-29 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seven years have passed since the publication of the previous edition of this book. During that time, sensor technologies have made a remarkable leap forward. The sensitivity of the sensors became higher, the dimensions became smaller, the sel- tivity became better, and the prices became lower. What have not changed are the fundamental principles of the sensor design. They are still governed by the laws of Nature. Arguably one of the greatest geniuses who ever lived, Leonardo Da Vinci, had his own peculiar way of praying. He was saying, “Oh Lord, thanks for Thou do not violate your own laws. ” It is comforting indeed that the laws of Nature do not change as time goes by; it is just our appreciation of them that is being re?ned. Thus, this new edition examines the same good old laws of Nature that are employed in the designs of various sensors. This has not changed much since the previous edition. Yet, the sections that describe the practical designs are revised substantially. Recent ideas and developments have been added, and less important and nonessential designs were dropped. Probably the most dramatic recent progress in the sensor technologies relates to wide use of MEMS and MEOMS (micro-electro-mechanical systems and micro-electro-opto-mechanical systems). These are examined in this new edition with greater detail. This book is about devices commonly called sensors. The invention of a - croprocessor has brought highly sophisticated instruments into our everyday lives.

Download or read book Piezoresistor Design and Applications written by Joseph C. Doll and published by Springer Science & Business Media. This book was released on 2013-10-30 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezoresistor Design and Applications provides an overview of these MEMS devices and related physics. The text demonstrates how MEMS allows miniaturization and integration of sensing as well as efficient packaging and signal conditioning. This text for engineers working in MEMS design describes the piezoresistive phenomenon and optimization in several applications. Includes detailed discussion of such topics as; coupled models of mechanics, materials and electronic behavior in a variety of common geometric implementations including strain gages, beam bending, and membrane loading. The text concludes with an up-to-date discussion of the need for integrated MEMS design and opportunities to leverage new materials, processes and MEMS technology. Piezoresistor Design and Applications is an ideal book for design engineers, process engineers and researchers.

Download or read book Electroceramic Based MEMS written by Nava Setter and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics: Part A: Applications and devices with electroceramic-based MEMS: Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devices MEMS for optical functionality Part B: Materials, fabrication technology, and functionality: Ceramic thick films for MEMS Piezoelectric thin films for MEMS Materials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramics Soft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field. The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.

Download or read book Microfluidics and BioMEMS written by Tuhin Subhra Santra and published by . This book was released on 2020-07-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book compiles cutting-edge research on cell manipulation, separation, and analysis using microfluidics and bio-MEMS. It illustrates the use of micro-robots for biomedical applications, vascularized microfluidic organs-on-a-chip and their applications, as well as DNA gene microarray biochips and their applications. It also elaborates on neuronal cell activity in microfluidic compartments, microvasculature and microarray gene patterning, different physical methods for drug delivery and analysis, micro-/nanoparticle preparation and separation in a micro-/nanofluidic environment, and the potential biomedical applications of micro-/nanoparticles. This book can be used by academic researchers, especially those involved in biomicrofluidics and bio-MEMS, and undergraduate- and graduate-level students of bio-MEMS/bio-NEMS, biomicrofluidics, biomicrofabricatios, micro-/nanofluidics, biophysics, single-cell analysis, bionanotechnology, drug delivery systems, and biomedical microdevices.

Download or read book Liquid Metal Biomaterials written by Jing Liu and published by Springer Series in Biomaterial. This book was released on 2019-08-08 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first-ever book to illustrate the principles and applications of liquid metal biomaterials. Room-temperature liquid metal materials are rapidly emerging as next-generation functional materials that display many unconventional properties superior to those of conventional biomaterials. Their outstanding, unique versatility ("one material, diverse capabilities") opens many exciting opportunities for the medical sciences. The book reviews representative applications of liquid metal biomaterials from both therapeutic and diagnostic aspects. It also discusses related efforts to employ liquid metals to overcome today's biomedical challenges. It will provide readers with a comprehensive understanding of the technical advances and fundamental discoveries on the frontier, and thus equip them to investigate and utilize liquid metal biomaterials to tackle various critical problems.

Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2006-11-10 with total page 1916 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major work has established itself as the definitive reference in the nanoscience and nanotechnology area in one volume. In presents nanostructures, micro/nanofabrication, and micro/nanodevices. Special emphasis is on scanning probe microscopy, nanotribology and nanomechanics, molecularly thick films, industrial applications and microdevice reliability, and on social aspects. Reflecting further developments, the new edition has grown from six to eight parts. The latest information is added to fields such as bionanotechnology, nanorobotics, and NEMS/MEMS reliability. This classic reference book is orchestrated by a highly experienced editor and written by a team of distinguished experts for those learning about the field of nanotechnology.

Download or read book Fundamentals and Applications of Microfluidics Third Edition written by Nam-Trung Nguyen and published by Artech House. This book was released on 2019-01-31 with total page 567 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its Third Edition, the Artech House bestseller, Fundamentals and Applications of Microfluidics, provides engineers and students with the most complete and current coverage of this cutting-edge field. This revised and expanded edition provides updated discussions throughout and features critical new material on microfluidic power sources, sensors, cell separation, organ-on-chip and drug delivery systems, 3D culture devices, droplet-based chemical synthesis, paper-based microfluidics for point-of-care, ion concentration polarization, micro-optofluidics and micro-magnetofluidics. The book shows how to take advantage of the performance benefits of microfluidics and serves as an instant reference for state-of-the-art microfluidics technology and applications. Readers find discussions on a wide range of applications, including fluid control devices, gas and fluid measurement devices, medical testing equipment, and implantable drug pumps. Professionals get practical guidance in choosing the best fabrication and enabling technology for a specific microfluidic application, and learn how to design a microfluidic device. Moreover, engineers get simple calculations, ready-to-use data tables, and rules of thumb that help them make design decisions and determine device characteristics quickly.

Download or read book Advanced Nanomaterials for Inexpensive Gas Microsensors written by Eduard Llobet Valero and published by Elsevier. This book was released on 2019-07-15 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Inexpensive Gas Microsensors presents full coverage of the area of gas sensing nanomaterials, from materials, transducers and applications to the latest advanced results and future directions. A number of experts in the field present work on gas sensing nanomaterials including metal oxides, carbon based and hybrid materials, together with their fabrication and application. The book brings together three major themes: Several chapters address synthesis, functionalization, characterization of advanced nanomaterials, with emphasis on synthesis techniques to ease the integration of nanomaterials in transducers. These chapters encompass a wide spectrum of sensing technologies including advanced nanomaterials such as metal oxides, carbon materials and graphene, organic molecular materials, and atomic layers such as MoS2. The authors examine the coupling of sensitive nanomaterials to different types of transducer elements and their applications, including direct growth and additive fabrication techniques as a way to obtain inexpensive gas microsensors, principal transduction schemes, and advanced operating methods. Assess the value of major applications for gas microsensors, including air quality monitoring both indoors (buildings and vehicles) and outdoors, monitoring perishable goods and medical. For each application, potential issues are clearly identified, research directions to overcome these are suggested, and market analysis data is included. Advanced Nanomaterials for Inexpensive Gas Microsensors presents the latest research and most comprehensive coverage in the field of gas micro and nano sensors for research scientists, academics, graduate students, and R&D managers working on synthesis of nanomaterials and fabrication of sensing systems, in a wide range of areas in electrical and material engineering, physical chemistry, electrochemistry and physics. Presents technological solutions and applications of gas sensors in varied areas of chemistry, physics, material science, and engineering Examines advanced operating methods (e.g., temperature modulation, self-heating, light-activated response, noise methods) to enhance stability, sensitivity, selectivity and reduce power consumption Provides a critical review of current applications and their expected future evolution, demonstrating which are the most promising approaches and what can be expected from the development of inexpensive gas micro- and nanosensors

Download or read book Measurement Instrumentation and Sensors Handbook Second Edition written by John G. Webster and published by CRC Press. This book was released on 2014-01-29 with total page 1641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.

Download or read book Integrated Chemical Microsensor Systems in CMOS Technology written by Andreas Hierlemann and published by Springer Science & Business Media. This book was released on 2005-08-29 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beginning with a comprehensive survey of existing semiconductor-based chemical microsensors and microsystems, this book proceeds to describe in detail CMOS technology-based chemical microsensor systems. The benefits of using CMOS technology for developing chemical microsensor systems and, in particular, monolithically integrated sensor systems comprising transducers and associated circuitry are laid out. Several successful realizations of such microsensor systems are presented. First, the fundamentals of the chemical sensing process itself will be elucidated, followed by a short description of microfabrication techniques and the CMOS substrate. Thereafter, a comprehensive overview of semiconductor-based and CMOS-based transducer structures and their applications is given. It is shown that CMOS-technology can be successfully used as platform technology to integrate microtransducers with the necessary driving and signal conditioning circuitry, and, in a next step, to develop monolithic multisensor arrays and fully developed microsystems with on-chip sensor control and standard interfaces. The book concludes with a brief outlook to future developments, such as interfacing cells with CMOS microelectronics.