Download or read book Signal Digitization and Reconstruction in Digital Radios written by Yefim Poberezhskiy and published by Artech House. This book was released on 2018-12-31 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive resource provides the latest information on digitization and reconstruction (D&R) of analog signals in digital radios. Readers learn how to conduct comprehensive analysis, concisely describe the major signal processing procedures carried out in the radios, and demonstrate the dependence of these procedures on the quality of D&R. The book presents and analyzes the most promising and theoretically sound ways to improve the characteristics of D&R circuits and illustrate the influence of these improvements on the capabilities of digital radios. The book is intended to bridge the gap that exists between theorists and practical engineers developing D&R techniques by introducing new signal transmission and reception methods that can effectively utilize the unique capabilities offered by novel digitization and reconstruction techniques.

Download or read book Physics and Mathematics Behind Wave Dynamics written by Sanichiro Yoshida and published by Springer Nature. This book was released on with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Cognitive Radio Receiver Front Ends written by Bodhisatwa Sadhu and published by Springer Science & Business Media. This book was released on 2013-10-11 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the architecture and circuit design for cognitive radio receiver front-ends. The authors first provide a holistic explanation of RF circuits for cognitive radio systems. This is followed by an in-depth exploration of existing techniques that can be utilized by circuit designers. Coverage also includes novel circuit techniques and architectures that can be invaluable for designers for cognitive radio systems.

Download or read book Industrial and Laboratory Measuring Systems written by Josef Vedral and published by CRC Press. This book was released on 2024-10-04 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the types and properties of computer controlled industrial and laboratory measuring systems for data acquisition and the processing signals of typical physical sensors. It is intended for users and designers of digital measurement systems working in laboratories and industry, scientific and research environments, and students taking relevant courses. An overview of the properties of these sensors used in laboratory and industrial environments is provided. The chapters describe the properties of computers used in measurement systems, including plug-in cards and the IEEE-488 protocol. The following chapters describe the types and properties of distributed and modular measuring systems and systems using data networks, including wireless measuring systems. The final chapters describe methods of digitization, reconstruction and signal processing in measurement systems in time and frequency domains.

Download or read book Real time Digital Signal Processing written by Sen-Maw Kuo and published by 清华大学出版社有限公司. This book was released on 2003 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book Digital Signal Processing written by Li Tan and published by Academic Press. This book was released on 2013-01-21 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Signal Processing, Second Edition enables electrical engineers and technicians in the fields of biomedical, computer, and electronics engineering to master the essential fundamentals of DSP principles and practice. Many instructive worked examples are used to illustrate the material, and the use of mathematics is minimized for easier grasp of concepts. As such, this title is also useful to undergraduates in electrical engineering, and as a reference for science students and practicing engineers. The book goes beyond DSP theory, to show implementation of algorithms in hardware and software. Additional topics covered include adaptive filtering with noise reduction and echo cancellations, speech compression, signal sampling, digital filter realizations, filter design, multimedia applications, over-sampling, etc. More advanced topics are also covered, such as adaptive filters, speech compression such as PCM, u-law, ADPCM, and multi-rate DSP and over-sampling ADC. New to this edition: - MATLAB projects dealing with practical applications added throughout the book - New chapter (chapter 13) covering sub-band coding and wavelet transforms, methods that have become popular in the DSP field - New applications included in many chapters, including applications of DFT to seismic signals, electrocardiography data, and vibration signals - All real-time C programs revised for the TMS320C6713 DSK - Covers DSP principles with emphasis on communications and control applications - Chapter objectives, worked examples, and end-of-chapter exercises aid the reader in grasping key concepts and solving related problems - Website with MATLAB programs for simulation and C programs for real-time DSP

Download or read book Techniques and System Design of Radar Active Jamming written by Guangfu Tang and published by Springer Nature. This book was released on 2023-02-20 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a handbook for radar active jamming system designers, in which design principles and methods are introduced in detail. The book starts from the basic concept and then discusses requirements analysis, type selection, key indicators description, and design methods of radar active jamming system and each subsystem step by step. The content is expressed in an intelligible way, and hence, it is easy to follow even for beginners in this area. Since the authors of this book are all experts and have designed plenty of real systems, their book certainly helps new engineers deal with different kinds of problems encountered while designing a radar active jamming system.

Download or read book Electronic Microwave Imaging with Planar Multistatic Arrays written by Sherif Sayed Ahmed and published by Logos Verlag Berlin GmbH. This book was released on 2014 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microwave imagers featuring a fully electronic scanning are highly demanded in security, industrial, and medical applications. Planar multistatic arrays operating at close ranges offer exceptional image resolution and illumination coverage compared to conventional far-field imaging. Novel solutions for synthesizing multistatic arrays for close range imaging with a scalable topology are introduced in this work along with detailed experimental verifications in the millimeter-wave range. Consequently, an electronic microwave imager based on modern digital-beamforming techniques has been successfully realized. High quality imaging of humans has been demonstrated, which represents a key milestone for the future generations of personnel screening systems required for securing air traffic as well as critical infrastructures. The work establishes the theoretical foundations for designing electronic microwave imagers, while addressing the associated challenges, e.g., image reconstruction, illumination adjustment, signal processing, hardware architecture, calibration technique, and results interpretation. The achieved three-dimensional complex-valued images open vast opportunities for new applications to effectively utilize the advanced capabilities of microwave imaging.

Download or read book Digital Signal Processing System Level Design Using LabVIEW written by Nasser Kehtarnavaz and published by Elsevier. This book was released on 2011-04-01 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: LabVIEW (Laboratory Virtual Instrumentation Engineering Workbench) developed by National Instruments is a graphical programming environment. Its ease of use allows engineers and students to streamline the creation of code visually, leaving time traditionally spent on debugging for true comprehension of DSP. This book is perfect for practicing engineers, as well as hardware and software technical managers who are familiar with DSP and are involved in system-level design. With this text, authors Kehtarnavaz and Kim have also provided a valuable resource for students in conventional engineering courses. The integrated lab exercises create an interactive experience which supports development of the hands-on skills essential for learning to navigate the LabVIEW program. Digital Signal Processing System-Level Design Using LabVIEW is a comprehensive tool that will greatly accelerate the DSP learning process. Its thorough examination of LabVIEW leaves no question unanswered. LabVIEW is the program that will demystify DSP and this is the book that will show you how to master it.* A graphical programming approach (LabVIEW) to DSP system-level design* DSP implementation of appropriate components of a LabVIEW designed system* Providing system-level, hands-on experiments for DSP lab or project courses

Download or read book Mobile Secure and Programmable Networking written by Samia Bouzefrane and published by Springer. This book was released on 2017-10-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the Third International Conference on Mobile, Secure and Programmable Networking, held in Paris, France, in June 2017. The 17 papers presented in this volume were carefully reviewed and selected from 35 submissions. They discuss new trends in networking infrastructures, security, services and applications while focusing on virtualization and cloud computing, network programming, software defined networks (SDN) and their security.

Download or read book Tools of Radio Astronomy written by T. L. Wilson and published by Springer Science & Business Media. This book was released on 2008-11-14 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Four signi?cant factors have led us to update this text. The ?rst is the breathtaking progress in technology, especially in receiver and digital techniques. The second is the advance of radio astronomy to shorter wavelengths, and the increased availab- ity of astronomical satellites. The third is a need to reorganize some of the chapters in order to separate the basic theory, that seldom changes, from practical aspects that change often. Finally, it is our desire to enhance the text by including problem sets for each chapter. In view of this ambitious plan, we have expanded the number of authors. In the reorganization of this edition, we have divided Chap. 4 of the 4th edition into two Chaps. 4 and 5. The ?rst remains Chap. 4, with a slightly different - tle, Signal Processing and Receivers: Theory. This was expanded to include digital processing and components including samplers and digitizers. In Chap. 5, Prac- cal Receiver Systems. we have relegated the presentations of maser and parametric ampli?er front ends, which are no longer commonly used as microwave receivers in radio astronomy, to a short section on “historical developments” and We have retained and improved the presentations of current state-of-the-art devices, cooled transistor and superconducting front ends. We have also included descriptions of local oscillators and phase lock loops. Chapters 5 and 6 in the 4th edition has now become Chap. 6, Fundamentals of Antenna Theory and Chap.

Download or read book The Electrical Engineering Handbook Six Volume Set written by Richard C. Dorf and published by CRC Press. This book was released on 2018-12-14 with total page 3627 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has grown into a set of six books carefully focused on specialized areas or fields of study. Each one represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Combined, they constitute the most comprehensive, authoritative resource available. Circuits, Signals, and Speech and Image Processing presents all of the basic information related to electric circuits and components, analysis of circuits, the use of the Laplace transform, as well as signal, speech, and image processing using filters and algorithms. It also examines emerging areas such as text to speech synthesis, real-time processing, and embedded signal processing. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar delves into the fields of electronics, integrated circuits, power electronics, optoelectronics, electromagnetics, light waves, and radar, supplying all of the basic information required for a deep understanding of each area. It also devotes a section to electrical effects and devices and explores the emerging fields of microlithography and power electronics. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Broadcasting and Optical Communication Technology explores communications, information theory, and devices, covering all of the basic information needed for a thorough understanding of these areas. It also examines the emerging areas of adaptive estimation and optical communication. Computers, Software Engineering, and Digital Devices examines digital and logical devices, displays, testing, software, and computers, presenting the fundamental concepts needed to ensure a thorough understanding of each field. It treats the emerging fields of programmable logic, hardware description languages, and parallel computing in detail. Systems, Controls, Embedded Systems, Energy, and Machines explores in detail the fields of energy devices, machines, and systems as well as control systems. It provides all of the fundamental concepts needed for thorough, in-depth understanding of each area and devotes special attention to the emerging area of embedded systems. Encompassing the work of the world's foremost experts in their respective specialties, The Electrical Engineering Handbook, Third Edition remains the most convenient, reliable source of information available. This edition features the latest developments, the broadest scope of coverage, and new material on nanotechnologies, fuel cells, embedded systems, and biometrics. The engineering community has relied on the Handbook for more than twelve years, and it will continue to be a platform to launch the next wave of advancements. The Handbook's latest incarnation features a protective slipcase, which helps you stay organized without overwhelming your bookshelf. It is an attractive addition to any collection, and will help keep each volume of the Handbook as fresh as your latest research.

Download or read book Digital Design of Signal Processing Systems written by Shoab Ahmed Khan and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Design of Signal Processing Systems discusses a spectrum of architectures and methods for effective implementation of algorithms in hardware (HW). Encompassing all facets of the subject this book includes conversion of algorithms from floating-point to fixed-point format, parallel architectures for basic computational blocks, Verilog Hardware Description Language (HDL), SystemVerilog and coding guidelines for synthesis. The book also covers system level design of Multi Processor System on Chip (MPSoC); a consideration of different design methodologies including Network on Chip (NoC) and Kahn Process Network (KPN) based connectivity among processing elements. A special emphasis is placed on implementing streaming applications like a digital communication system in HW. Several novel architectures for implementing commonly used algorithms in signal processing are also revealed. With a comprehensive coverage of topics the book provides an appropriate mix of examples to illustrate the design methodology. Key Features: A practical guide to designing efficient digital systems, covering the complete spectrum of digital design from a digital signal processing perspective Provides a full account of HW building blocks and their architectures, while also elaborating effective use of embedded computational resources such as multipliers, adders and memories in FPGAs Covers a system level architecture using NoC and KPN for streaming applications, giving examples of structuring MATLAB code and its easy mapping in HW for these applications Explains state machine based and Micro-Program architectures with comprehensive case studies for mapping complex applications The techniques and examples discussed in this book are used in the award winning products from the Center for Advanced Research in Engineering (CARE). Software Defined Radio, 10 Gigabit VoIP monitoring system and Digital Surveillance equipment has respectively won APICTA (Asia Pacific Information and Communication Alliance) awards in 2010 for their unique and effective designs.

Download or read book Digital Signal Processing Techniques and Applications in Radar Image Processing written by Bu-Chin Wang and published by John Wiley & Sons. This book was released on 2008-08-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained approach to DSP techniques and applications in radar imaging The processing of radar images, in general, consists of three major fields: Digital Signal Processing (DSP); antenna and radar operation; and algorithms used to process the radar images. This book brings together material from these different areas to allow readers to gain a thorough understanding of how radar images are processed. The book is divided into three main parts and covers: * DSP principles and signal characteristics in both analog and digital domains, advanced signal sampling, and interpolation techniques * Antenna theory (Maxwell equation, radiation field from dipole, and linear phased array), radar fundamentals, radar modulation, and target-detection techniques (continuous wave, pulsed Linear Frequency Modulation, and stepped Frequency Modulation) * Properties of radar images, algorithms used for radar image processing, simulation examples, and results of satellite image files processed by Range-Doppler and Stolt interpolation algorithms The book fully utilizes the computing and graphical capability of MATLAB? to display the signals at various processing stages in 3D and/or cross-sectional views. Additionally, the text is complemented with flowcharts and system block diagrams to aid in readers' comprehension. Digital Signal Processing Techniques and Applications in Radar Image Processing serves as an ideal textbook for graduate students and practicing engineers who wish to gain firsthand experience in applying DSP principles and technologies to radar imaging.

Download or read book Phonetics written by Henning Reetz and published by John Wiley & Sons. This book was released on 2011-09-23 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: Companion website, featuring additional resources such as sound files, can be found here: http://www.blackwellpublishing.com/phonetics/ Providing a comprehensive overview of the four primary areas of phonetics, Phonetics: Transcription, Production, Acoustics, and Perception is an ideal guide to the complete study of speech and sound. An accessible but in-depth introductory textbook on the basic concepts of phonetics Covers all four areas of phonetics: transcription, production, acoustics, and perception Offers uniquely thorough coverage of related relevant areas, including vocal fold vibration and the working of the ear, creating an engagingly flexible work for instructors Includes chapter-by-chapter exercises, enabling students to put their knowledge into practice Written in a clear and concise style by two of the field’s leading scholars

Download or read book Wireless Sensors and Instruments written by Halit Eren and published by CRC Press. This book was released on 2018-10-03 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances such as 3-G mobile communications networks demonstrate the increasing capability of high-quality data transmission over wireless media. Adapting wireless functionality into instrument and sensor systems endows them with unmatched flexibility, robustness, and intelligence. Wireless Sensors and Instruments: Networks, Design, and Applications explains the principles, state-of-the-art technologies, and modern applications of this burgeoning field. From underlying concepts to practical applications, this book outlines all the necessary information to plan, design, and implement wireless instrumentation and sensor networks effectively and efficiently. The author covers the basics of instruments, measurement, sensor technology, communication systems, and networks along with the theory, methods, and components involved in digital and wireless instruments. Placing these technologies in context, the book also examines the principles, components, and techniques of modern communication systems followed by network standards, protocols, topologies, and security. Building on these discussions, the book uses examples to illustrate the practical aspects of constructing sensors and instruments. Finally, the author devotes the closing chapter to applications in a broad array of fields, including commercial, human health, and consumer products applications. Filled with up-to-date information and thorough coverage of fundamentals, Wireless Sensors and Instruments: Networks, Design, and Applications supplies critical, hands-on tools for efficiently, effectively, and immediately implementing advanced wireless systems.