Download or read book SiC and Si3N4 Recession Due to SiO2 Scale Volatility Under Combustor Conditions written by James L. Smialek and published by . This book was released on 1999 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide (SiC) and Si3N4 materials were tested in various turbine engine combustion environments chosen to represent either conventional fuel-lean or fuel-rich mixtures proposed for high-speed aircraft. Representative chemical vapor-deposited (CVD), sintered, and composite materials were evaluated by furnace and high-pressure burner rig exposures. Although protective SiO2 scales formed in all cases, the evidence presented supports a model based on paralinear growth kinetics (i.e., parabolic growth moderated simultaneously by linear volatilization). The volatility rate is dependent on temperature, moisture content, system pressure, and gas velocity. The burner tests were thus used to map SiO2 volatility (and SiC recession) over a range of temperatures, pressures, and velocities. The functional dependency of material recession (volatility) that emerged followed the form A[exp(-Q / RT)](P[factor x]v[factor y]). These empirical relations were compared with rates predicted from the thermodynamics of volatile SiO and SiO[sub x]H[sub y] reaction products and a kinetic model of diffusion through a moving boundary layer. For typical combustion conditions, recession of 0.2 to 2[micro]m/hr is predicted at 1200 to 1400°C, far in excess of acceptable long-term limits.

Download or read book SiC Recession Due to SiO2 Scale Volatility Under Combustor Conditions written by Raymond Craig Robinson and published by . This book was released on 1997 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sic and Si3n4 Recession Due to Sio2 Scale Volatility Under Combustor Conditions written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-09-25 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon carbide (SiC) and Si3N4 materials were tested in various turbine engine combustion environments chosen to represent either conventional fuel-lean or fuel-rich mixtures proposed for high-speed aircraft. Representative chemical vapor-deposited (CVD), sintered, and composite materials were evaluated by furnace and high-pressure burner rig exposures. Although protective SiO2 scales formed in all cases, the evidence presented supports a model based on paralinear growth kinetics (i.e., parabolic growth moderated simultaneously by linear volatilization). The volatility rate is dependent on temperature, moisture content, system pressure, and gas velocity. The burner tests were thus used to map SiO2 volatility (and SiC recession) over a range of temperatures, pressures, and velocities. The functional dependency of material recession (volatility) that emerged followed the form A[exp(-Q / RT)](P(sup x)v(sup y). These empirical relations were compared with rates predicted from the thermodynamics of volatile SiO and SiOxHy reaction products and a kinetic model of diffusion through a moving boundary layer. For typical combustion conditions, recession of 0.2 to 2 micrometers/hr is predicted at 1200 to 1400 C, far in excess of acceptable long-term limits. Smialek, James L. and Robinson, Raymond C. and Opila, Elizabeth J. and Fox, Dennis S. and Jacobson, Nathan S. Glenn Research Center NASA/TP-1999-208696, E-11447, NAS 1.60:208696

Download or read book Sic Recession Due to Sio2 Scale Volatility Under Combustion Conditions written by Elizabeth J. Opila and published by BiblioGov. This book was released on 2013-08 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: In combustion environments, volatilization of SiO2 to Si-O-H(g) species is a critical issue. Available thermochemical data for Si-O-H(g) species were used to calculate boundary layer controlled fluxes from SiO2. Calculated fluxes were compared to volatilization rates Of SiO2 scales grown on SiC which were measured in Part 1 of this paper. Calculated volatilization rates were also compared to those measured in synthetic combustion gas furnace tests. Probable vapor species were identified in both fuel-lean and fuel-rich combustion environments based on the observed pressure, temperature and velocity dependencies as well as the magnitude of the volatility rate. Water vapor is responsible for the degradation of SiO2 in the fuel-lean environment. Silica volatility in fuel-lean combustion environments is attributed primarily to the formation of Si(OH)4(g) with a small contribution of SiO(OH)2(g).

Download or read book SiC and Si3N4 Recession Due to SiO u2082 Scale Volatility Under Combustor Conditions written by and published by . This book was released on 1999 with total page 7 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings of the Symposium on High Temperature Corrosion and Materials Chemistry written by Electrochemical Society. High Temperature Materials Division and published by The Electrochemical Society. This book was released on 1998 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Temperature Corrosion and Materials Chemistry written by Michael McNallan and published by The Electrochemical Society. This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in High Temperature Ceramic Matrix Composites and Materials for Sustainable Development written by Mrityunjay Singh and published by John Wiley & Sons. This book was released on 2017-06-29 with total page 693 pages. Available in PDF, EPUB and Kindle. Book excerpt: Global population growth and tremendous economic development has brought us to the crossroads of long-term sustainability and risk of irreversible changes in the ecosystem. Energy efficient and ecofriendly technologies and systems are critically needed for further growth and sustainable development. While ceramic matrix composites were originally developed to overcome problems associated with the brittle nature of monolithic ceramics, today the composites can be tailored for customized purposes and offer energy efficient and ecofriendly applications, including aerospace, ground transportation, and power generation systems. The 9th International Conference on High Temperature Ceramic Matrix Composites (HTCMC 9) was held in Toronto, Canada, June 26-30, 2016 to discuss challenges and opportunities in manufacturing, commercialization, and applications for these important material systems. The Global Forum on Advanced Materials and Technologies for Sustainable Development (GFMAT 2016) was held in conjunction with HTCMC 9 to address key issues, challenges, and opportunities in a variety of advanced materials and technologies that are critically needed for sustainable societal development. This Ceramic Transactions volume contains a collection of peer reviewed papers from the 16 below symposia that were submitted from these two conferences Design and Development of Advanced Ceramic Fibers, Interfaces, and Interphases in Composites- A Symposium in Honor of Professor Roger Naslain Innovative Design, Advanced Processing, and Manufacturing Technologies Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) Polymer Derived Ceramics and Composites Advanced Thermal and Environmental Barrier Coatings: Processing, Properties, and Applications Thermomechanical Behavior and Performance of Composites Ceramic Integration and Additive Manufacturing Technologies Component Testing and Evaluation of Composites CMC Applications in Transportation and Industrial Systems Powder Processing Innovation and Technologies for Advanced Materials and Sustainable Development Novel, Green, and Strategic Processing and Manufacturing Technologies Ceramics for Sustainable Infrastructure: Geopolymers and Sustainable Composites Advanced Materials, Technologies, and Devices for Electro-optical and Medical Applications Porous Ceramics for Advanced Applications Through Innovative Processing Multifunctional Coatings for Sustainable Energy and Environmental Applications

Download or read book High Temperature Materials and Mechanisms written by Yoseph Bar-Cohen and published by CRC Press. This book was released on 2014-03-03 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of high-temperature materials in current and future applications, including silicone materials for handling hot foods and metal alloys for developing high-speed aircraft and spacecraft systems, has generated a growing interest in high-temperature technologies. High Temperature Materials and Mechanisms explores a broad range of issues relate

Download or read book TMS 2011 140th Annual Meeting and Exhibition Materials Fabrication Properties Characterization and Modeling written by The Minerals, Metals & Materials Society (TMS) and published by John Wiley & Sons. This book was released on 2011-04-12 with total page 987 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the most up-to-date information on the state of Materials Fabrication, Properties, Characterization, and Modeling. It's a great mix of practical applied technology and hard science, which is of invaluable benefit to the global industry.

Download or read book High Temperature Coatings written by Sudhangshu Bose and published by Butterworth-Heinemann. This book was released on 2017-11-27 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Temperature Coatings, Second Edition, demonstrates how to counteract the thermal effects of rapid corrosion and degradation of exposed materials and equipment that can occur under high operating temperatures. This is the first true practical guide on the use of thermally protective coatings for high-temperature applications, including the latest developments in materials used for protective coatings. It covers the make-up and behavior of such materials under thermal stress and the methods used for applying them to specific types of substrates, as well as invaluable advice on inspection and repair of existing thermal coatings. With his long experience in the aerospace gas turbine industry, the author has compiled the very latest in coating materials and coating technologies, as well as hard-to-find guidance on maintaining and repairing thermal coatings, including appropriate inspection protocols. The book is supplemented with the latest reference information and additional support to help readers find more application- and industry-type coatings specifications and uses. - Offers an overview of the underlying fundamental concepts of thermally-protective coatings, including thermodynamics, energy kinetics, crystallography and equilibrium phases - Covers essential chemistry and physics of underlying substrates, including steels, nickel-iron alloys, nickel-cobalt alloys and titanium alloys - Provides detailed guidance on a wide variety of coating types, including those used against high temperature corrosion and oxidative degradation and thermal barrier coatings

Download or read book Comprehensive Structural Integrity written by Ian Milne and published by Elsevier. This book was released on 2003-07-25 with total page 4647 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this major reference work is to provide a first point of entry to the literature for the researchers in any field relating to structural integrity in the form of a definitive research/reference tool which links the various sub-disciplines that comprise the whole of structural integrity. Special emphasis will be given to the interaction between mechanics and materials and structural integrity applications. Because of the interdisciplinary and applied nature of the work, it will be of interest to mechanical engineers and materials scientists from both academic and industrial backgrounds including bioengineering, interface engineering and nanotechnology. The scope of this work encompasses, but is not restricted to: fracture mechanics, fatigue, creep, materials, dynamics, environmental degradation, numerical methods, failure mechanisms and damage mechanics, interfacial fracture and nano-technology, structural analysis, surface behaviour and heart valves. The structures under consideration include: pressure vessels and piping, off-shore structures, gas installations and pipelines, chemical plants, aircraft, railways, bridges, plates and shells, electronic circuits, interfaces, nanotechnology, artificial organs, biomaterial prostheses, cast structures, mining... and more. Case studies will form an integral part of the work.

Download or read book Environmental Barrier Coatings written by Kang N. Lee and published by MDPI. This book was released on 2020-12-29 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: The global increase in air travel will require commercial vehicles to be more efficient than ever before. Advanced engine hot section materials are a key technology required to keep fuel consumption and emission to a minimum in next-generation gas turbines. Ceramic matrix composites (CMCs) are the most promising material to revolutionize gas turbine hot section materials technology because of their excellent high‐temperature properties. Rapid surface recession due to volatilization by water vapor is the Achilles heel of CMCs. Environmental barrier coatings (EBCs) is an enabling technology for CMCs, since it protects CMCs from water vapor. The first CMC component entered into service in 2016 in a commercial engine, and more CMC components are scheduled to follow within the next few years. One of the most difficult challenges to CMC components is EBC durability, because failure of EBC leads to a rapid reduction in CMC component life. Key contributors to EBC failure include recession, oxidation, degradation by calcium‐aluminum‐magnesium silicates (CMAS) deposits, thermal and thermo‐mechanical strains, particle erosion, and foreign object damage (FOD). Novel EBC chemistries, creative EBC designs, and robust processes are required to meet EBC durability challenges. Engine-relevant testing, characterization, and lifing methods need to be developed to improve EBC reliability. The aim of this Special Issue is to present recent advances in EBC technology to address these issues. In particular, topics of interest include but are not limited to the following: • Novel EBC chemistries and designs; • Processing including plasma spray, suspension plasma spray, solution precursor plasma spray, slurry process, PS-PVD, EB-PVD, and CVD; • Testing, characterization, and modeling; • Lifing.

Download or read book Advanced Ceramic Coatings and Materials for Extreme Environments III Volume 34 Issue 3 written by Hua-Tay Lin and published by John Wiley & Sons. This book was released on 2013-11-04 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic Engineering and Science Proceedings Volume 34, Issue 3 - Advanced Ceramic Coatings and Materials for Extreme Environments III A collection of 12 papers from The American Ceramic Society’s 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Advanced Ceramic Coatings and Systems and Next Generation Technologies for Innovative Surface Coatings symposia.

Download or read book System Health Management written by Stephen B. Johnson and published by John Wiley & Sons. This book was released on 2011-06-01 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: System Health Management: with Aerospace Applications provides the first complete reference text for System Health Management (SHM), the set of technologies and processes used to improve system dependability. Edited by a team of engineers and consultants with SHM design, development, and research experience from NASA, industry, and academia, each heading up sections in their own areas of expertise and co-coordinating contributions from leading experts, the book collates together in one text the state-of-the-art in SHM research, technology, and applications. It has been written primarily as a reference text for practitioners, for those in related disciplines, and for graduate students in aerospace or systems engineering. There are many technologies involved in SHM and no single person can be an expert in all aspects of the discipline.System Health Management: with Aerospace Applications provides an introduction to the major technologies, issues, and references in these disparate but related SHM areas. Since SHM has evolved most rapidly in aerospace, the various applications described in this book are taken primarily from the aerospace industry. However, the theories, techniques, and technologies discussed are applicable to many engineering disciplines and application areas. Readers will find sections on the basic theories and concepts of SHM, how it is applied in the system life cycle (architecture, design, verification and validation, etc.), the most important methods used (reliability, quality assurance, diagnostics, prognostics, etc.), and how SHM is applied in operations (commercial aircraft, launch operations, logistics, etc.), to subsystems (electrical power, structures, flight controls, etc.) and to system applications (robotic spacecraft, tactical missiles, rotorcraft, etc.).

Download or read book Advanced Ultrasonic Methods for Material and Structure Inspection written by Tribikram Kundu and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultrasonic signals are increasingly being used for predicting material behavior, both in an engineering context (detecting anomalies in a variety of structures) and a biological context (examining human bones, body parts and unborn fetuses). Featuring contributions from authors who are specialists in their subject area, this book presents new developments in ultrasonic research in both these areas, including ultrasonic NDE and other areas which go beyond traditional imaging techniques of internal defects. As such, both those in the biological and physical science communities will find this an informative and stimulating read.

Download or read book Ceramic Matrix Composites written by Composite Materials Handbook – 17 (CMH-17) and published by SAE International. This book was released on 2017-06-29 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fifth volume of this six-volume compendium publishes technical guidance and properties on ceramic matrix composite material systems. The selected guidance on technical topics related to this class of composites includes material selection, processing, characterization, testing, data reduction, design, analysis, quality control, application, case histories, and lessons learned of typical ceramic matrix composite materials. Volume 5, which covers ceramic matrix composites, supersedes MIL-HDBK-17-5 of June 17, 2002. The Composite Materials Handbook, referred to by industry groups as CMH-17, is an engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites. CMH-17 provides information and guidance necessary to design and fabricate end items from composite materials. It includes properties of composite materials that meet specific data requirements as well as guidelines for design, analysis, material selection, manufacturing, quality control, and repair. The primary purpose of the handbook is to standardize engineering methodologies related to testing, data reduction, and reporting of property data for current and emerging composite materials. It is used by engineers worldwide in designing and fabricating products made from composite materials.