Download or read book Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2010-04-01 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: This interdisciplinary book encompasses the fields of rock mechanics, structural geology and petroleum engineering to address a wide range of geomechanical problems that arise during the exploitation of oil and gas reservoirs. It considers key practical issues such as prediction of pore pressure, estimation of hydrocarbon column heights and fault seal potential, determination of optimally stable well trajectories, casing set points and mud weights, changes in reservoir performance during depletion, and production-induced faulting and subsidence. The book establishes the basic principles involved before introducing practical measurement and experimental techniques to improve recovery and reduce exploitation costs. It illustrates their successful application through case studies taken from oil and gas fields around the world. This book is a practical reference for geoscientists and engineers in the petroleum and geothermal industries, and for research scientists interested in stress measurements and their application to problems of faulting and fluid flow in the crust.

Download or read book Rock Engineering and Rock Mechanics Structures in and on Rock Masses written by R. Alejano and published by CRC Press. This book was released on 2014-05-12 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering and Rock Mechanics: Structures in and on Rock Masses covers the most important topics and state-of-the-art in the area of rock mechanics, with an emphasis on structures in and on rock masses. The 255 contributions (including 6 keynote lectures) from the 2014 ISRM European Rock Mechanics Symposium (EUROCK 2014, Vigo, Spain, 27-29 Ma

Download or read book Design Analysis in Rock Mechanics written by William G. Pariseau and published by CRC Press. This book was released on 2017-07-14 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended third edition includes an additional chapter on Foundations on Jointed Rock. Developed for a complete class in rock engineering, this volume uniquely combines the design of surface and underground rock excavations and addresses: • rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures • shaft and tunnel stability, ranging from naturally-supported openings to analysis and design of artificial support and reinforcement systems • entries and pillars in stratified ground • three-dimensional caverns, with emphasis on cable bolting and backfill • geometry and forces of chimney caving, combination support and trough subsidence • rock bursts and bumps in underground excavations, with focus on dynamic phenomena and on fast and sometimes catastrophic failures. The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for home assignment. A solutions manual is available to course instructors. Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first year graduate students in mining, civil engineering and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.

Download or read book New Challenges in Rock Mechanics and Rock Engineering written by Roberto Tomás and published by CRC Press. This book was released on 2024-07-29 with total page 1585 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Challenges in Rock Mechanics and Rock Engineering includes the contributions presented at the ISRM European Rock Mechanics Symposium Eurock 2024 (Alicante, Spain, 15-19 July 2024), and explores cutting-edge advancements in rock mechanics and rock engineering. This comprehensive compilation covers various aspects of rock mechanics and rock engineering, including: rock properties, testing methods, infrastructure and mining rock mechanics, design analysis, stone heritage preservation, geophysics, numerical modeling, monitoring techniques, underground excavation support, risk assessment, and the application of EUROCODE-7 in rock engineering. Furthermore, it addresses areas like geomechanics for the oil and gas industry, applications of artificial intelligence, remote sensing methodologies and geothermal technology. New Challenges in Rock Mechanics and Rock Engineering covers the latest breakthroughs and tackles the new challenges in rock mechanics and rock engineering, is aimed at scientists and professionals in these fields, and serves as an essential resource for keeping up to date with industry trends and solutions.

Download or read book Education and Training in Geo Engineering Sciences written by Iacint Manoliu and published by CRC Press. This book was released on 2008-05-20 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering a broad range of topics (curricular matters in geo-engineering education, teaching; learning and assessment in geo-engineering education; challenges in geotechnical engineering education; issues in education and training in Engineering Geology; the link university -professional world in geo-engineering, this book will be invaluable to university teachers, academics and professionals involved in education and training in geo-engineering sciences.

Download or read book A Short Course in Geotechnical Site Investigation written by N. E. Simons and published by Thomas Telford. This book was released on 2002-10-21 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Folded card: Identification and description of soils; and, Identification and description of rocks / designed by Environmental Services Group Limited 2007 in accordance with BS EN ISO 14689-1 and BS EN ISO 14688-1 respectively; and designed to be taken into the field during the walk-over survey.

Download or read book A Short Course in Soil and Rock Slope Engineering written by Noel Simons and published by Thomas Telford Limited. This book was released on 2001-09-28 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work comprehensively treats soil & rock slope engineering in one volume. It focuses on getting the fundamentals right, explaining simple methods of stability analysis, and applying them to a wide range of practical applications.

Download or read book Engineering Rock Mechanics written by John A Hudson and published by Elsevier. This book was released on 2000-06-12 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering rock mechanics is the discipline used to design structures built in rock. These structures encompass building foundations, dams, slopes, shafts, tunnels, caverns, hydroelectric schemes, mines, radioactive waste repositories and geothermal energy projects: in short, any structure built on or in a rock mass. Despite the variety of projects that use rock engineering, the principles remain the same. Engineering Rock Mechanics clearly and systematically explains the key principles behind rock engineering. The book covers the basic rock mechanics principles; how to study the interactions between these principles and a discussion on the fundamentals of excavation and support and the application of these in the design of surface and underground structures. Engineering Rock Mechanics is recommended as an across-the-board source of information for the benefit of anyone involved in rock mechanics and rock engineering.

Download or read book The Second Half Century of Rock Mechanics Three Volume Set written by Luis Ribeiro e Sousa and published by CRC Press. This book was released on 2007-08-05 with total page 1356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Forty one years ago, the International Society for Rock Mechanics (ISRM) held its 1st International Congress in Lisbon, Portugal. In July 2007, the 11th ISRM Congress returned to Lisbon, where the Portuguese Geotechnical Society (SPG), the Portuguese National Group of the ISRM, hosted the meeting. The Second Half Century of Rock Mechanics comprises

Download or read book Practical Rock Mechanics written by Steve Hencher and published by CRC Press. This book was released on 2015-08-28 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction for graduate students, as well as engineering geologists and geotechnical engineers. It is also relevant to those working in nuclear waste disposal and oil and gas production. The early chapters deal with fundamental mechanics and physics as they apply to rock masses. It provides an introduction to the geological processes that give rise to the nature of rock masses and control their mechanical behavior. It discusses stresses in the earth's crust and explains methods of measurement and prediction.

Download or read book Rock Mechanics written by Alfreds R. Jumikis and published by Enfield Books. This book was released on 1979 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Education and Training Information Exchange written by and published by . This book was released on 1981 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Analysis in Rock Mechanics Second Edition written by William G. Pariseau and published by CRC Press. This book was released on 2011-09-29 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive introduction to rock mechanics treats the basics of rock mechanics in a clear and straightforward manner and discusses important design problems in terms of the mechanics of materials. This extended second edition includes an additional chapter on rock bursts and bumps, a part on basic dynamics, and numerous additional examples and exercises throughout the chapters. Developed for a complete class in rock engineering, Design Analysis in Rock Mechanics, Second Edition uniquely combines the design of surface and underground rock excavations and addresses: Rock slope stability in surface excavations, from planar block and wedge slides to rotational and toppling failures Shaft and tunnel stability, ranging from naturally supported openings to analysis and design of artificial support and reinforcement systems Entries and pillars in stratified ground Three-dimensional caverns, with an emphasis on cable bolting and backfill Geometry and forces of chimney caving, combination support, and trough subsidence Rock bursts and bumps in underground excavations, with a focus on dynamic phenomena and on fast and sometimes catastrophic failures The numerous exercises and examples familiarize the reader with solving basic practical problems in rock mechanics through various design analysis techniques and their applications. Supporting the main text, appendices provide supplementary information about rock, joint, and composite properties, rock mass classification schemes, useful formulas, and an extensive literature list. The large selection of problems at the end of each chapter can be used for homework assignments. Explanatory and illustrative in character, this volume is suited for courses in rock mechanics, rock engineering and geological engineering design for undergraduate and first-year graduate students in mining, civil engineering, and applied earth sciences. Moreover, it will form a good introduction to the subject of rock mechanics for earth scientists and engineers from other disciplines.

Download or read book Rock Mechanics in Mining Practice written by S. Budavari and published by . This book was released on 1983 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Short Course in Foundation Engineering written by N. E. Simons and published by Thomas Telford. This book was released on 2000 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although there are now a large number of computer programmes for solving all sorts of foundation design problems, the need to check these outputs by 'hand-calculation' has become vitally important. This book concentrates on getting the fundamentals right and then using them in practical applications. The book is illustrated with numerous worked examples and with quick-reference tables and charts. In this new edition, the original highly acclaimed text has been extended and updated and now includes major new sections on short term and long term stability, critical state interpretation of peak strength, seismic methods for measuring ground stiffness in situ, and offshore pile design: total stress and effective stress approaches.A

Download or read book Rock bolting Theory and application in mining and underground construction written by Ove Stephansson and published by Routledge. This book was released on 2021-06-23 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt: This includes the Proceedings of the international symposium, Abisko, Sweden, 28 August-2 September 1983. Rock bolts today represent the dominant support system in mines and underground structures. Some results and experiences are discussed to give a better understanding of the strength of individual rock bolts and systems of bolts, and the interaction between bolts and rock masses of various types. Topics covered are as follows: rock bolting in theory and experiments; design principles and experience; and ground control and instrumentation: cable bolting.

Download or read book Petroleum Rock Mechanics written by Bernt S. Aadnoy and published by Gulf Professional Publishing. This book was released on 2019-06-15 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Rock Mechanics: Drilling Operations and Well Design, Second Edition, keeps petroleum and drilling engineers centrally focused on the basic fundamentals surrounding geomechanics, while also keeping them up-to-speed on the latest issues and practical problems. Updated with new chapters on operations surrounding shale oil, shale gas, and hydraulic fracturing, and with new sections on in-situ stress, drilling design of optimal mud weight, and wellbore instability analysis, this book is an ideal resource. By creating a link between theory with practical problems, this updated edition continues to provide the most recent research and fundamentals critical to today's drilling operations. - Helps readers grasp the techniques needed to analyze and solve drilling challenges, in particular wellbore instability analysis - Teaches rock mechanic fundamentals and presents new concepts surrounding sand production and hydraulic fracturing operations - Includes new case studies and sample problems to practice