Download or read book Sheet Molding Compounds written by Hamid G. Kia and published by Hanser Gardner Publications. This book was released on 1993-01-01 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the current technology for sheet molding compound (SMC) manufacturing, as well as the science behind this technology.

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Engineered Materials Handbook Desk Edition written by ASM International. Handbook Committee and published by ASM International. This book was released on 1995-11-01 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive reference on the properties, selection, processing, and applications of the most widely used nonmetallic engineering materials. Section 1, General Information and Data, contains information applicable both to polymers and to ceramics and glasses. It includes an illustrated glossary, a collection of engineering tables and data, and a guide to materials selection. Sections 2 through 7 focus on polymeric materials--plastics, elastomers, polymer-matrix composites, adhesives, and sealants--with the information largely updated and expanded from the first three volumes of the Engineered Materials Handbook. Ceramics and glasses are covered in Sections 8 through 12, also with updated and expanded information. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Polymer Technology Dictionary written by A. Whelan and published by Springer. This book was released on 2012-10-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive encyclopaedic dictionary on polymer technology with expanded entries - trade name and trade marks, list of abbreviations and property tables.

Download or read book Phenolic Resins A Century of Progress written by Louis Pilato and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The legacy of Leo Hendrik Baekeland and his development of phenol formal- hyde resins are recognized as the cornerstone of the Plastics Industry in the early twentieth century, and phenolic resins continue to ?ourish after a century of robust growth. On July 13, 1907, Baekeland ?led his “heat and pressure” patent related to the processing of phenol formaldehyde resins and identi?ed their unique utility in a plethora of applications. The year 2010 marks the Centennial Year of the prod- tion of phenolic resins by Leo Baekeland. In 1910, Baekeland formed Bakelite GmbH and launched the manufacture of phenolic resins in Erkner in May 1910. In October 1910, General Bakelite began producing resins in Perth Amboy, New Jersey. Lastly, Baekeland collaborated with Dr. Takamine to manufacture phenolic resins in Japan in 1911. These events were instrumental in establishing the Plastics Industry and in tracing the identity to the brilliance of Dr. Leo Baekeland. Phenolic resins remain as a versatile resin system featuring either a stable, thermoplastic novolak composition that cures with a latent source of formaldehyde (hexa) or a heat reactive and perishable resole composition that cures thermally or under acidic or special basic conditions. Phenolic resins are a very large volume resin system with a worldwide volume in excess of 5 million tons/year, and its growth is related to the gross national product (GNP) growth rate globally.

Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Machining of Polymer Composites written by Jamal Ahmad and published by Springer Science & Business Media. This book was released on 2009-04-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This excellent volume will serve as an indispensable reference and source book for process design, tool and production engineers in composite manufacturing. It provides the reader with a comprehensive treatment of the theory of machining as it applies to fiber reinforced polymer composites. It covers the latest technical advances in the area of machining and tooling, and discusses the applications of fiber reinforced polymer composites in the aircraft and automotive industries.

Download or read book Polyester Molding Compounds written by Robert Burns and published by CRC Press. This book was released on 1982-05-03 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mesoscale simulation of the mold filling process of Sheet Molding Compound written by Meyer, Nils and published by KIT Scientific Publishing. This book was released on 2022-07-12 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sheet Molding Compounds (SMC) are discontinuous fiber reinforced composites that are widely applied due to their ability to realize composite parts with long fibers at low cost. A novel Direct Bundle Simulation (DBS) method is proposed in this work to enable a direct simulation at component scale utilizing the observation that fiber bundles often remain in a bundled configuration during SMC compression molding.

Download or read book A Practical Guide to Plastics Sustainability written by Michel Biron and published by William Andrew. This book was released on 2020-04-18 with total page 691 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical Guide to Plastics Sustainability: Concept, Solutions, and Implementation is a groundbreaking reference work offering a broad, detailed and highly practical vision of the complex concept of sustainability in plastics. The book's aim is to present a range of potential pathways towards more sustainable plastics parts and products, enabling the reader to further integrate the idea of sustainability into their design process. It begins by introducing the context and concept of sustainability, discussing perceptions, drivers of change, key factors, and environmental issues, before presenting a detailed outline of the current situation with types of plastics, processing, and opportunities for improved sustainability. Subsequent chapters focus on the different possibilities for improved sustainability, offering a step-by-step technical approach to areas including design, properties, renewable plastics, and recycling and re-use. Each of these pillars are supported by data, examples, analysis and best practice guidance. Finally, the latest developments and future possibilities are considered. - Approaches the idea of sustainability from numerous angles, offering practical solutions to improve sustainability in the development of plastic components and products - Explains how sustainability can be applied across plastics design, materials selection, processing, and end of life, all set alongside socioeconomic factors - Considers key areas of innovation, such as eco-design, novel opportunities for recycling or re-use, bio-based polymers and new technologies

Download or read book Manufacturing Techniques for Polymer Matrix Composites PMCs written by Suresh G Advani and published by Elsevier. This book was released on 2012-07-18 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer matrix composites are used extensively across a wide range of industries, making the design and development of effective manufacturing processes of great importance. Manufacturing techniques for polymer matrix composites (PMCs) provides an authoritative review of the different technologies employed in the manufacture of this class of composite.Following an introduction to composites and manufacturing processes, part one reviews the manufacturing of short fiber and nanoparticle based polymer matrix composites, with injection and compression molding examined in depth. Thermoplastic processing is the focus of part two. Sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles are investigated. Part three reviews thermoset processing. A survey of resin transfer molding follows, including vacuum-assisted and compression resin transfer molding. The pultrusion process is then considered, before the book concludes with an investigation into autoclave and out-of-autoclave curing processes in polymer matrix composites.With its distinguished editors and international team of expert contributors, Manufacturing techniques for polymer matrix composites (PMCs) is an essential guide for engineers and scientists working in the field of polymer matrix composites. - Provides an authoritative review of the different technologies employed in the manufacture of polymer matrix composites - Reviews the manufacturing of short fiber and nanoparticle-based polymer matrix composites, with injection and compression molding examined in depth - Examines thermoplastic processing, sheet forming, fabric thermostamping, filament winding and continuous fiber reinforced profiles

Download or read book Composites Manufacturing written by Sanjay Mazumdar and published by CRC Press. This book was released on 2001-12-27 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: More and more companies manufacture reinforced composite products. To meet the market need, researchers and industries are developing manufacturing methods without a reference that thoroughly covers the manufacturing guidelines. Composites Manufacturing: Materials, Product, and Process Engineering fills this void. The author presents a fundamental

Download or read book Bio Based Polymers and Composites written by Richard Wool and published by Elsevier. This book was released on 2011-08-30 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bio-Based Polymers and Composites is the first book systematically describing the green engineering, chemistry and manufacture of biobased polymers and composites derived from plants. This book gives a thorough introduction to bio-based material resources, availability, sustainability, biobased polymer formation, extraction and refining technologies, and the need for integrated research and multi-disciplinary working teams. It provides an in-depth description of adhesives, resins, plastics, and composites derived from plant oils, proteins, starches, and natural fibers in terms of structures, properties, manufacturing, and product performance. This is an excellent book for scientists, engineers, graduate students and industrial researchers in the field of bio-based materials.* First book describing the utilization of crops to make high performance plastics, adhesives, and composites* Interdisciplinary approach to the subject, integrating genetic engineering, plant science, food science, chemistry, physics, nano-technology, and composite manufacturing.* Explains how to make green materials at low cost from soyoil, proteins, starch, natural fibers, recycled newspapers, chicken feathers and waste agricultural by-products.

Download or read book Analysis and Performance of Fiber Composites written by Bhagwan D. Agarwal and published by Wiley-Interscience. This book was released on 1990-10-08 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having fully established themselves as workable engineering materials, composite materials are now increasingly commonplace around the world. Serves as both a text and reference guide to the behavior of composite materials in different engineering applications. Revised for this Second Edition, the text includes a general discussion of composites as material, practical aspects of design and performance, and further analysis that will be helpful to those engaged in research on composites. Each chapter closes with references for further reading and a set of problems that will be useful in developing a better understanding of the subject.

Download or read book Introduction to continuum damage mechanics written by L. Kachanov and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern engineering materials subjected to unfavorable mechanical and environmental conditions decrease in strength due to the accumulation of microstructural changes. For example, considering damage in metals we can mention creep damage, ductile plastic damage, embrittlement of steels and fatigue damage. To properly estimate the value of damage when designing reliable structures it is necessary to formulate the damage phenomenon in terms of mechanics. Then it is possible to analyse various engineering problems using analytical and computational techniques. During the last two decades the basic principles of continuum damage mechanics were formulated and some special problems were solved. Many scientific papers were published and several conferences on damage mechanics took place. Now continuum damage mechanics is rapidly developing branch of fracture mechanics. This book is probably the first one on the subject; it contains a sys tematic description of the basic aspects of damage mechanics and some of its applications. In general, a theoretical description of damage can be rather compli cated. The experiments in this field are difficult (especially under multiax ial stress and non-proportional loading). Therefore, experimental data, as a rule, are scarce. Determination of functions and constants, which play a role in the complex variants of the theory, from available experimental data is often practically impossible. ix L.M. Kachanov The problems of damage mechanics are mainly engineering ones. Therefore, the author tries to avoid superfluous mathematical formalism. Some more details of the book's subject can be found in the list of con tents.

Download or read book Advanced Materials by Design written by and published by . This book was released on 1988 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: