Download or read book Shear Capacity of Concrete Members Under Monotonic and Cyclic Loading written by Sara Javidmehr and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shear Strength of Reinforced Concrete Members Subjected to Monotonic and Cyclic Loads written by Malte Von Ramin and published by . This book was released on 2004 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Deformation Capacity and Shear Strength of Reinforced Concrete Members Under Cyclic Loading written by Adolfo Benjamin Matamoros and published by . This book was released on 2006 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: A joint technical session was organized by Joint ACI-ASCE Committees 441, Reinforced Concrete Columns, and 445, Shear and Torsion, during the American Concrete Institute's Fall 2004 Convention in San Francisco, CA. The goal of the technical session was to showcase recent developments in this area, with the hope that continued discussion will lead to improved models that are suitable for performance-based engineering. This symposium publication is a collection of technical articles presented at that meeting and represents an effort from Joint ACI-ASCE Committees 441 and 445 to continue the technical discussion on this topic. (From preface.)

Download or read book Shear Strength of One way Reinforced Concrete Slabs Under Monotonic and Cyclic Loading written by Then-piao Liu and published by . This book was released on 1977 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design Assessment and Retrofitting of Concrete Buildings written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO

Download or read book Shear Behavior of Steel Fiber Reinforced Concrete Beams Under Monotonic and Cyclic Loads written by June Suh and published by . This book was released on 1990 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shear Strength Reinforced Concrete Beams Under Cyclic Loading written by Hari Narain Singh and published by . This book was released on 1969 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Displacement based Seismic Design of Reinforced Concrete Buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: A brief summary of the history of seismic design as given in chapter 1, indicates that initially design was purely based on strength or force considerations. When the importance of displacement, however, became better appreciated, it was attempted to modify the existing force-based approach in order to include considerations of displacement, rather than to totally reconsider the procedure on a more rational basis. In the last decade, then, several researchers started pointing out this inconsistency, proposing displacement-based approaches for earthquake engineering evaluation and design, with the aim of providing improved reliability in the engineering process by more directly relating computed response and expected structural performance. The main objective of this report is to summarize, critically review and compare the displacement - based approaches proposed in the literature, thus favouring code implementation and practical use of rational and reliable methods. Chapter 2 Seismic performance and design objectives of this report introduces concepts of performance levels, seismic hazard representation, and the coupling of performance and hazard to define performance objectives. In fact, for displacement analysis to be relevant in the context of performance-based design, the structural engineer must select appropriate performance levels and seismic loadings. A critical review of some engineering limit states appropriate to the different performance levels is therefore proposed. In chapter 3 Conceptual basis for displacement-based earthquake resistant design, the fundamental principles associated with displacement of the ground during an earthquake and the effects, in terms of displacement, in the structure, are reviewed. The historical development guides the presentation with a review of general linear and nonlinear structural dynamics principles, general approaches to estimate displacement, for both ground and structure, and finally a general presentation of the means to measure and judge the appropriateness of the displacements of the structure in section. Chapter 4 Approaches and procedures for displacement-based design can be somehow considered the fundamental part of the report, since a critical summary of the displacement - based approaches proposed by different researchers is presented there. Displacement - based design may require specific characterization of the input ground motion, a topic addressed in Chapter 5 Seismic input. In general, various pertinent definitions of input motion for non-code format analysis are included, while peak ground parameters necessary for code base shear equations are only addressed as needed for the definition of motion for analysis. Chapter 6 Displacement capacity of members and systems addresses the fundamental problem of evaluating the inelastic displacement capacity of reinforced concrete members and realistic values of their effective cracked stiffness at yielding, including effects of shear and inclined cracking, anchorage slip, bar buckling and of load cycling. In Chapter 7 Application and evaluation of displacement-based approaches, some of the many different displacement based design procedures briefly introduced in Chapter 4 are applied to various case studies, identifying and discussing the difficulties a designer may encounter when trying to use displacement based design. Results for five different case studies designed in accordance with eight different displacement based design methods are presented. Although in general case studies are considered a useful but marginal part of a state of the art document, in this case it has to be noted that chapter 7 is possibly the most innovative and fundamental part of the whole report. The conclusions of chapter 7 are the fundamental and essential conclusions of the document and allow foreseeing a bright future for displacement - based design approaches. The state-of-art report has been elaborated over a period of 4 years by Task Group 7.2 Displacement-based design and assessment of fib Commission 7Seismic design, a truly international team of experts, representing the expertise and experience of all the important seismic regions of the world. In October 2002 the final draft of the Bulletin was presented to the public during the 1st fibCongress in Osaka. It was also there that it was approved by fib Commission 7Seismic Design.

Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall

Download or read book Size Effect in Concrete Materials and Structures written by Xiuli Du and published by Springer Nature. This book was released on 2020-12-31 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book gathers a large amount of the recent research results on this topic to provide a better understanding of the size effect by giving a quantitative description of the relationship between the properties of engineering concrete-making material (e.g. the nominal strength) and the corresponding structure size. To be precise, this is about to explore the new static and dynamic unified size effect laws for concrete materials, as well as size effect laws for concrete components. Besides presenting clear and accurate descriptions that further deepen our fundamental knowledge, this book provides additionally useful tools for the scientific design of concrete structures in practical engineering applications.

Download or read book ACI 440 2R 17 Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures written by ACI Committee 440 and published by . This book was released on 2017-04-27 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seismic Design of Concrete Buildings to Eurocode 8 written by Michael Fardis and published by CRC Press. This book was released on 2015-02-04 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Original Source of Expressions and Tools for the Design of Concrete Elements with EurocodeSeismic design of concrete buildings needs to be performed to a strong and recognized standard. Eurocode 8 was introduced recently in the 30 countries belonging to CEN, as part of the suite of Structural Eurocodes, and it represents the first European Stand

Download or read book Investigation of Reinforced Concrete Beam column Joints Under Reversed Cyclic Loading written by Aly Marei Said and published by . This book was released on 2004 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book FRP Reinforcement in RC Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2007-01-01 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 40 deals mainly with the use of FRP bars as internal reinforcement for concrete structures. The background of the main physical and mechanical properties of FRP reinforcing bars is presented, with special emphasis on durability aspects. For each of the typical ultimate and serviceability limit states, the basic mechanical model is given, followed by different design models according to existing codes or design guidelines. Composite FRP materials are still relatively new in construction and most engineers are unfamiliar with their properties and characteristics. The second chapter of this bulletin therefore aims to provide practising engineers with the necessary background knowledge in this field, and also presents typical products currently available in the international market. The third chapter deals with the issue of durability and identifies the parameters that can lead to deterioration, which is necessary information when addressing design issues. A series of parameters is used to identify the allowable stress in the FRP after exposure for a specified period of time in a specific environment. The bulletin covers the issues of Ultimate Limit States (primarily dealing with flexural design), Serviceability Limit States (dealing with deflections and cracking), Shear and Punching Shear and Bond and Tension Stiffening. It provides not only the state-of-the-art but also in many cases ideas for the next generation of design guidelines. The final chapter deals with the fundamental issue of design philosophy. The use of these new materials as concrete reinforcement has forced researchers to re-think many of the fundamental principles used until now in RC design. The bulletin ends with a discussion of a possible new framework for developing partial safety factors to ensure specific safety levels that will be flexible enough to cope with new materials.

Download or read book PRO 21 International RILEM Symposium on Connections Between Steel and Concrete Set written by Rolf Eligehausen and published by RILEM Publications. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Structures Under Cyclic Loading written by Farhad Aslani and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental programs in laboratories give real results to identify nonlinear behavior of reinforced concrete (RC) structures but they are limited to knowledge of particular cases under restricted structural dimensions, sizes, shapes, loading and boundary conditions but the computational simulation approach has no limit to its application. Constitutive models are developed to simulate the dynamic nonlinear response of concrete and steel reinforcement subjected to cyclic loading varying randomly in magnitude. The behavior of structural concrete under monotonic loading is affected by important material aspects including cracking, crushing, tension stiffening, compression softening and bond slip. Reversed cyclic loading introduces further complexities such as stiffness degradation in concrete and the Bauschinger effect in reinforcing steel. In this research the validity and reliability of some proposed constitutive models for concrete considering general loading i.e. cyclic, monotonic, partial, common point and transition loading are evaluated. Amongst many existing constitutive models, because of their simplicity and common usage in the finite element analysis of RC structures, only some common proposed models based on nonlinear elasticity-based approach are investigated. These models are verified against experimental data available in the literature and the results are discussed. In this study, also, a hysteretic stress-strain model is developed for unconfined concrete with the intention of providing efficient modeling for the structural behavior of concrete in seismic regions. The proposed model is based on the findings of previous experimental and analytical studies. The model for concrete subjected to monotonic and cyclic loading, comprises four components in compression and tension; an envelope curve (for monotonic and cyclic loading), an unloading curve, a reloading curve, and transition curve. Also presented are formulations for partial unloading and partial reloading curves. The proposed Constitutive model reliability is investigated by RC members non-linear finite element analysis (FEM) using by finite element software ABAQUS. Comparisons with test results showed that the proposed model provides a good fit to a wide range of experimentally established hysteresis loops.

Download or read book Seismic Design of Reinforced Concrete Structures for Controlled Inelastic Response written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1998 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed guide is designed to enable the reader to understand the relative importance of the numerous parameters involved in seismic design and the relationships between them, as well as the motivations behind the choices adopted by the codes.