Download or read book Shear Behavior of Fiber Reinforced Concrete Beams with Stirrups written by Sugiarto Loni and published by . This book was released on 1983 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book On Shear Behavior of Structural Elements Made of Steel Fiber Reinforced Concrete written by Estefanía Cuenca and published by Springer. This book was released on 2014-12-27 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book sheds light on the shear behavior of Fiber Reinforced Concrete (FRC) elements, presenting a thorough analysis of the most important studies in the field and highlighting their shortcomings and issues that have been neglected to date. Instead of proposing a new formula, which would add to an already long list, it instead focuses on existing design codes. Based on a comparison of experimental tests, it provides a thorough analysis of these codes, describing both their reliability and weaknesses. Among other issues, the book addresses the influence of flange size on shear, and the possible inclusion of the flange factor in design formulas. Moreover, it reports in detail on tests performed on beams made of concrete of different compressive strengths, and on fiber reinforcements to study the influence on shear, including size effects. Lastly, the book presents a thorough analysis of FRC hollow core slabs. In fact, although this is an area of great interest in the current research landscape, it remains largely unexplored due to the difficulties encountered in attempting to fit transverse reinforcement in these elements.
Download or read book Fibrous Concrete written by Concrete Society and published by . This book was released on 1980 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book fib Model Code for Concrete Structures 2010 written by fib - federation internationale du beton and published by John Wiley & Sons. This book was released on 2013-12-04 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Federation for Structural Concrete (fib) is a pre-normative organization. 'Pre-normative' implies pioneering work in codification. This work has now been realized with the fib Model Code 2010. The objectives of the fib Model Code 2010 are to serve as a basis for future codes for concrete structures, and present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. The fib Model Code 2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement. It is expected to become an important document for both national and international code committees, practitioners and researchers. The fib Model Code 2010 was produced during the last ten years through an exceptional effort by Joost Walraven (Convener; Delft University of Technology, The Netherlands), Agnieszka Bigaj-van Vliet (Technical Secretary; TNO Built Environment and Geosciences, The Netherlands) as well as experts out of 44 countries from five continents.
Download or read book Shear Behavior of Fiber Reinforced High Strength Concrete Beams written by Amjad Shahbazker and published by . This book was released on 1993 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fibre Reinforced Cementitious Composites Second Edition written by Arnon Bentur and published by CRC Press. This book was released on 2006-11-22 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced cementitious composites can be designed to have outstanding combinations of strength (five to ten times that of conventional concrete) and energy absorption capacity (up to 1000 times that of plain concrete). This second edition brings together in one volume the latest research developments in this rapidly expanding area. The book is split into two parts. The first part is concerned with the mechanics of fibre reinforced brittle matrices and the implications for cementitious systems. In the second part the authors describe the various types of fibre-cement composites, discussing production processes, mechanical and physical properties, durability and applications. Two new chapters have been added, covering fibre specification and structural applications. Fibre Reinforced Cementitious Composites will be of great interest to practitioners involved in modern concrete technology and will also be of use to academics, researchers and graduate students.
Download or read book Shear Behavior of Steel Fiber Reinforced Prestressed Concrete Beams Without Shear Reinforcement written by Jae-Sung Cho and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The ACI 318-08 building code allows to use the steel fiber reinforcement as alternative shear reinforcement with satisfying certain criteria when a beam is required minimum shear reinforcement. However, this provision applies to a nonprestressed and prestressed concrete beam such that it could be conservative since the shear strength of prestressed concrete beam is generally enhanced due to the prestressing force. This is due partially to the fact that the provision has been accepted based on researches, mostly conducted in nonprestressed concrete beam. Most of experiments conducted for prestressed concrete beam in small scale tests, with a height of specimens were less than 10 in. A larger scale of experiment is required due to concerns of size effect. In addition, in order to evaluate the qualification of a Steel Fiber Reinforced Concrete (SFRC) mixture used for structural applications, such as increasing shear resistance, a material evaluation method is essential. Currently ASTM or ACI Committee 544 (Fiber-Reinforced Concrete) does not recommend any standardized test method for evaluating shear performance of a particular SFRC material. This study addresses the research gaps described above by testing large-scale Steel Fiber Reinforced Prestressed Concrete (SFRPC) beams as well as developing a simple laboratory test techniques. A total 13 simply-supported beams for large-scale test with a shear span to effective depth ratio of 3.0 and a height of 24 in. were subjected to monotonically-increased, concentrated load. The test parameters were mainly included compressive strength, volume fraction of steel fibers, compressive reinforcement ratio. The results of large-scale test showed that the use of hooked steel fibers in a volume fraction greater than or equal to 0.50% volume fraction of steel fibers (67 lb per cubic yard), which is less than requirement by ACI 318-08 (0.75%, 100 lb per cubic yard), led to substantial enhancement of shear behaviors including the first cracking, the ultimate, and ductility. High compressive strength of SFRC, greater than 9000 psi, which is higher than ACI 318-08 requirement (less than 6000 psi) could be used as well. However, there was no significant effect from compressive reinforcement ratio. A simply shear test method for SFRC was proposed in this study. The test apparatus is almost exactly the same as the conventional ASTM bending test with only minor modification, in addition, it could simulate a pure shear stress by adjusting loading and support positions. By introducing a proper reinforcement for bending stress, it was possible to evaluate shear performance of SFRC with clear and uncomplicated shear stress field in the critical section.
Download or read book Guide for the Design and Construction of Concrete Reinforced with Fiber Reinforced Polymer Bars written by ACI Committee 440 and published by . This book was released on 2003 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Steel Fiber Reinforced Concrete written by Harvinder Singh and published by Springer. This book was released on 2016-10-26 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses design aspects of steel fiber-reinforced concrete (SFRC) members, including the behavior of the SFRC and its modeling. It also examines the effect of various parameters governing the response of SFRC members in detail. Unlike other publications available in the form of guidelines, which mainly describe design methods based on experimental results, it describes the basic concepts and principles of designing structural members using SFRC as a structural material, predominantly subjected to flexure and shear. Although applications to special structures, such as bridges, retaining walls, tanks and silos are not specifically covered, the fundamental design concepts remain the same and can easily be extended to these elements. It introduces the principles and related theories for predicting the role of steel fibers in reinforcing concrete members concisely and logically, and presents various material models to predict the response of SFRC members in detail. These are then gradually extended to develop an analytical flexural model for the analysis and design of SFRC members. The lack of such a discussion is a major hindrance to the adoption of SFRC as a structural material in routine design practice. This book helps users appraise the role of fiber as reinforcement in concrete members used alone and/or along with conventional rebars. Applications to singly and doubly reinforced beams and slabs are illustrated with examples, using both SFRC and conventional reinforced concrete as a structural material. The influence of the addition of steel fibers on various mechanical properties of the SFRC members is discussed in detail, which is invaluable in helping designers and engineers create optimum designs. Lastly, it describes the generally accepted methods for specifying the steel fibers at the site along with the SFRC mixing methods, storage and transport and explains in detail methods to validate the adopted design. This book is useful to practicing engineers, researchers, and students.
Download or read book Polymer Science and Innovative Applications written by Mariam Al Ali AlMaadeed and published by Elsevier. This book was released on 2020-05-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Science and Innovative Applications: Materials, Techniques, and Future Developments introduces the science of innovative polymers and composites, their analysis via experimental techniques and simulation, and their utilization in a variety of application areas. This approach helps to unlock the potential of new materials for product design and other uses. The book also examines the role that these applications play in the human world, from pollution and health impacts, to their potential to make a positive contribution in areas including environmental remediation, medicine and healthcare, and renewable energy. Advantages, disadvantages, possibilities, and challenges relating to the utilization of polymers in human society are included. Presents the latest advanced applications of polymers and their composites and identifies key areas for future development Introduces the simulation methods and experimental techniques involved in the modification of polymer properties, supported by clear and detailed images and diagrams Supports an interdisciplinary approach, enabling readers across different fields to harness the power of new materials for innovative applications
Download or read book Reinforced Concrete Structures written by Robert Park and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sets out basic theory for the behavior of reinforced concrete structural elements and structures in considerable depth. Emphasizes behavior at the ultimate load, and, in particular, aspects of the seismic design of reinforced concrete structures. Based on American practice, but also examines European practice.
Download or read book The Shear Behavior of Steel Fiber Reinforced Concrete Beam written by Dhafer Saad A. Alshehri and published by . This book was released on 2010 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shear Behavior of Deep and Wide shallow Beams in Fiber Reinforced Concrete written by Antonio Conforti and published by . This book was released on 2014 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shear Behavior of Prestressed Concrete Beams Using Fiber Reinforced Plastic Tendons written by Sang Yeol Park and published by . This book was released on 1997 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced and Prestressed Concrete written by F. K. Kong and published by CRC Press. This book was released on 1998-04 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly successful textbook has been comprehensively revised for two main reasons: to bring the book up-to-date and make it compatible with BS8110 1985; and to take into account the increasing use made of microcomputers in civil engineering. An important chapter on microcomputer applications has been added.
Download or read book Fibre Cements and Fibre Concretes written by D. J. Hannant and published by John Wiley & Sons. This book was released on 1978 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Shear Behavior of Steel Fiber Reinforced Concrete Beams Under Monotonic and Cyclic Loads written by June Suh and published by . This book was released on 1990 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
