Download or read book Shape and Layout Optimization of Structural Systems and Optimality Criteria Methods written by G.I.N. Rozvany and published by Springer. This book was released on 2014-05-04 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape and layout optimization represent some of the most useful but also most difficult classes of problems in structural design, which have been investigated in detail only during the last few years. Shape optimization is concerned with the optimal shape of boundaries of continua or of interfaces between two materials in composites. Layout optimization deals with the simultaneous optimization of the topology, geometry and cross-sectional sizes of structural systems. In spite of its complextiy, layout optimization is a very rewarding task, because it results in much greater savings than the optimization of cross-sectional sizes only. Because of their important role in shape and layout optimization, the book also covers in detail new optimality criteria methods, which are capable of handling many thousand design variables and active design contraints. Shape and layout optimization is becoming an indispensable tool in the design of aeroplanes, space structures, cars, ships, building and civil engineering structures, power stations, chemical plants, artificial organs, sporting equipment, and all other solid systems where stresses and deformations play an important role.
Download or read book Shape and Layout Optimization of Structural Systems and Optimality Criteria Methods written by G. I. N. Rozvany and published by . This book was released on 2014-09-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Optimization written by George I. N. Rozvany and published by Springer. This book was released on 2011-09-20 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the IUTAM Symposium on Structural Optimization, Melbourne, Australia, February 9-13, 1988
Download or read book Topology Design Methods for Structural Optimization written by Osvaldo M. Querin and published by Butterworth-Heinemann. This book was released on 2017-06-09 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology Design Methods for Structural Optimization provides engineers with a basic set of design tools for the development of 2D and 3D structures subjected to single and multi-load cases and experiencing linear elastic conditions. Written by an expert team who has collaborated over the past decade to develop the methods presented, the book discusses essential theories with clear guidelines on how to use them. Case studies and worked industry examples are included throughout to illustrate practical applications of topology design tools to achieve innovative structural solutions. The text is intended for professionals who are interested in using the tools provided, but does not require in-depth theoretical knowledge. It is ideal for researchers who want to expand the methods presented to new applications, and includes a companion website with related tools to assist in further study. - Provides design tools and methods for innovative structural design, focusing on the essential theory - Includes case studies and real-life examples to illustrate practical application, challenges, and solutions - Features accompanying software on a companion website to allow users to get up and running fast with the methods introduced - Includes input from an expert team who has collaborated over the past decade to develop the methods presented
Download or read book Homogenization and Structural Topology Optimization written by Behrooz Hassani and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural topology optimization is a fast growing field that is finding numerous applications in automotive, aerospace and mechanical design processes. Homogenization is a mathematical theory with applications in several engineering problems that are governed by partial differential equations with rapidly oscillating coefficients Homogenization and Structural Topology Optimization brings the two concepts together and successfully bridges the previously overlooked gap between the mathematical theory and the practical implementation of the homogenization method. The book is presented in a unique self-teaching style that includes numerous illustrative examples, figures and detailed explanations of concepts. The text is divided into three parts which maintains the book's reader-friendly appeal.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1992 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Topology Design of Structures written by Martin P. Bendsøe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, Sesimbra, Portugal, June 20-26, 1992
Download or read book Topology Optimization written by Martin Philip Bendsoe and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topology optimization method solves the basic enginee- ring problem of distributing a limited amount of material in a design space. The first edition of this book has become the standard text on optimal design which is concerned with the optimization of structural topology, shape and material. This edition, has been substantially revised and updated to reflect progress made in modelling and computational procedures. It also encompasses a comprehensive and unified description of the state-of-the-art of the so-called material distribution method, based on the use of mathematical programming and finite elements. Applications treated include not only structures but also materials and MEMS.
Download or read book Computational Design of Lightweight Structures written by Benoit Descamps and published by John Wiley & Sons. This book was released on 2014-03-10 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author of this book presents a general, robust, and easy-to-use method that can handle many design parameters efficiently. Following an introduction, Chapter 1 presents the general concepts of truss layout optimization, starting from topology optimization where structural component sizes and system connectivity are simultaneously optimized. To fully realize the potential of truss layout optimization for the design of lightweight structures, the consideration of geometrical variables is then introduced. Chapter 2 addresses truss geometry and topology optimization by combining mathematical programming and structural mechanics: the structural properties of the optimal solution are used for devising the novel formulation. To avoid singularities arising in optimal configurations, this approach disaggregates the equilibrium equations and fully integrates their basic elements within the optimization formulation. The resulting tool incorporates elastic and plastic design, stress and displacement constraints, as well as self-weight and multiple loading. The inherent slenderness of lightweight structures requires the study of stability issues. As a remedy, Chapter 3 proposes a conceptually simple but efficient method to include local and nodal stability constraints in the formulation. Several numerical examples illustrate the impact of stability considerations on the optimal design. Finally, the investigation on realistic design problems in Chapter 4 confirms the practical applicability of the proposed method. It is shown how we can generate a range of optimal designs by varying design settings.
Download or read book Topology Optimization in Structural Mechanics written by G.I.N. Rozvany and published by Springer. This book was released on 2014-05-04 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: Topology optimization is a relatively new and rapidly expanding field of structural mechanics. It deals with some of the most difficult problems of mechanical sciences but it is also of considerable practical interest, because it can achieve much greater savings than mere cross-section or shape optimization.
Download or read book Architectural Graphics written by Manuel A. Ródenas-López and published by Springer Nature. This book was released on 2022-04-27 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reports on several advances in architectural graphics, with a special emphasis on education, training and research. It gathers a selection of contributions to the 19th International Conference on Graphic Design in Architecture, EGA 2022, held on June 2–4, 2022, in Cartagena, Spain, with the motto: "Beyond drawings. The use of architectural graphics".
Download or read book Optimization of Large Structural Systems written by George I. N. Rozvany and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: G.I.N. Rozvany ASI Director, Professor of Structural Design, FB 10, Essen University, Essen, Germany Structural optimization deals with the optimal design of all systems that consist, at least partially, of solids and are subject to stresses and deformations. This inte grated discipline plays an increasingly important role in all branches of technology, including aerospace, structural, mechanical, civil and chemical engineering as well as energy generation and building technology. In fact, the design of most man made objects, ranging from space-ships and long-span bridges to tennis rackets and artificial organs, can be improved considerably if human intuition is enhanced by means of computer-aided, systematic decisions. In analysing highly complex structural systems in practice, discretization is un avoidable because closed-form analytical solutions are only available for relatively simple, idealized problems. To keep discretization errors to a minimum, it is de sirable to use a relatively large number of elements. Modern computer technology enables us to analyse systems with many thousand degrees of freedom. In the optimization of structural systems, however, most currently available methods are restricted to at most a few hundred variables or a few hundred active constraints.
Download or read book Optimization of Structural Topology Shape and Material written by Martin P. Bendsoe and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past, the possibilities of structural optimization were restricted to an optimal choice of profiles and shape. Further improvement can be obtained by selecting appropriate advanced materials and by optimizing the topology, i.e. finding the best position and arrangement of structural elements within a construction. The optimization of structural topology permits the use of optimization algorithms at a very early stage of the design process. The method presented in this book has been developed by Martin Bendsoe in cooperation with other researchers and can be considered as one of the most effective approaches to the optimization of layout and material design.
Download or read book An Introduction to Structural Optimization written by Peter W. Christensen and published by Springer Science & Business Media. This book was released on 2008-10-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has grown out of lectures and courses given at Linköping University, Sweden, over a period of 15 years. It gives an introductory treatment of problems and methods of structural optimization. The three basic classes of geometrical - timization problems of mechanical structures, i. e. , size, shape and topology op- mization, are treated. The focus is on concrete numerical solution methods for d- crete and (?nite element) discretized linear elastic structures. The style is explicit and practical: mathematical proofs are provided when arguments can be kept e- mentary but are otherwise only cited, while implementation details are frequently provided. Moreover, since the text has an emphasis on geometrical design problems, where the design is represented by continuously varying—frequently very many— variables, so-called ?rst order methods are central to the treatment. These methods are based on sensitivity analysis, i. e. , on establishing ?rst order derivatives for - jectives and constraints. The classical ?rst order methods that we emphasize are CONLIN and MMA, which are based on explicit, convex and separable appro- mations. It should be remarked that the classical and frequently used so-called op- mality criteria method is also of this kind. It may also be noted in this context that zero order methods such as response surface methods, surrogate models, neural n- works, genetic algorithms, etc. , essentially apply to different types of problems than the ones treated here and should be presented elsewhere.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1977 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metaheuristic Applications in Structures and Infrastructures written by Xin-She Yang and published by Newnes. This book was released on 2013-01-31 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to an ever-decreasing supply in raw materials and stringent constraints on conventional energy sources, demand for lightweight, efficient and low-cost structures has become crucially important in modern engineering design. This requires engineers to search for optimal and robust design options to address design problems that are commonly large in scale and highly nonlinear, making finding solutions challenging. In the past two decades, metaheuristic algorithms have shown promising power, efficiency and versatility in solving these difficult optimization problems. This book examines the latest developments of metaheuristics and their applications in structural engineering, construction engineering and earthquake engineering, offering practical case studies as examples to demonstrate real-world applications. Topics cover a range of areas within engineering, including big bang-big crunch approach, genetic algorithms, genetic programming, harmony search, swarm intelligence and some other metaheuristic methods. Case studies include structural identification, vibration analysis and control, topology optimization, transport infrastructure design, design of reinforced concrete, performance-based design of structures and smart pavement management. With its wide range of everyday problems and solutions, Metaheursitic Applications in Structures and Infrastructures can serve as a supplementary text for design courses and computation in engineering as well as a reference for researchers and engineers in metaheuristics, optimization in civil engineering and computational intelligence. - Review of the latest development of metaheuristics in engineering. - Detailed algorithm descriptions with focus on practical implementation. - Uses practical case studies as examples and applications.
Download or read book Topology Optimization Theory for Laminar Flow written by Yongbo Deng and published by Springer. This book was released on 2017-09-27 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the topology optimization theory for laminar flows with low and moderate Reynolds numbers, based on the density method and level-set method, respectively. The density-method-based theory offers efficient convergence, while the level-set-method-based theory can provide anaccurate mathematical expression of the structural boundary. Unsteady, body-force-driven and two-phase properties are basic characteristics of the laminar flows. The book discusses these properties, which are typical of microfluidics and one of the research hotspots in the area of Micro-Electro-Mechanical Systems (MEMS), providing an efficient inverse design approach for microfluidic structures. To demonstrate the applications of this topology optimization theory in the context of microfluidics, it also investigates inverse design for the micromixer, microvalve and micropump, which are key elements in lab-on-chip devices.
