Download or read book Service Oriented Holonic and Multi Agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer Nature. This book was released on 2023-02-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific theme of the book is “Virtualisation – a multifaceted key enabler of Industry 4.0 from holonic to cloud manufacturing” which is addressed in the framework of cyber-physical system development. The book approaches cyber-physical systems for manufacturing with emergent digital technologies: Internet of Things, digital twins (based on the virtualization of production models embedded in the design, virtual commissioning, optimization and resilience of processes and fault tolerance of resources), big data, cloud control and computing, machine learning and cobots, that are applied in the book’s chapters to industry and service sectors such as manufacturing, energy, logistics, construction and health care. The novelty of this approach consists in interpreting and applying the characteristics of RAMI4.0—the reference architecture model of the Industry 4.0 framework—as combinations of virtualized cyber-physical system elements and IT components in life cycle value stream models. The general scope of the book is to foster innovation in smart and sustainable manufacturing and logistics systems and in this context to promote concepts, methods and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The book’s readership is comprised by researchers and engineers working in the manufacturing value chain area who develop and use digital control solutions in the “Industry of the Future” vision. The book also addresses to master’s and Ph.D. students enrolled in Engineering Sciences programs.
Download or read book Service Oriented Holonic and Multi Agent Manufacturing Systems for Industry of the Future written by Damien Trentesaux and published by Springer Nature. This book was released on 2021-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches its subject matter by promoting concepts, methods and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The scientific theme of the book concerns “Manufacturing as a Service”, developed by virtualizing and encapsulating manufacturing resources, activities and controls into cloud networked services in an open perspective that spans models from shop floor resource allocation to enterprise infrastructure sharing. The papers included in the application space have a profound human dedication and aim at solving societal needs serving the partnership of the future—people and industry in the era of Society 5.0. The book’s readership includes researchers and engineers working in manufacturing, supply chains and logistics areas who innovate, develop and use digital control solutions and students enrolled in Engineering and Service Science programs.
Download or read book Service Oriented Holonic and Multi Agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer Nature. This book was released on 2021-03-02 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific theme of the book concerns “Manufacturing as a Service (MaaS)” which is developed in a layered cloud networked manufacturing perspective, from the shop floor resource sharing model to the virtual enterprise collaborative model, by distributing the cost of the manufacturing infrastructure - equipment, software, maintenance, networking - across all customers. MaaS is approached in terms of new models of service-oriented, knowledge-based manufacturing systems optimized and reality-aware, that deliver value to customer and manufacturer via Big data analytics, Internet of Things communications, Machine learning and Digital twins embedded in Cyber-Physical System frameworks. From product design to after-sales services, MaaS relies on the servitization of manufacturing operations such as: Design as a Service, Predict as a Service or Maintain as a service. The general scope of the book is to foster innovation in smart and sustainable manufacturing and logistics systems and in this context to promote concepts, methods and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The book’s readership is comprised by researchers and engineers working in the manufacturing value chain area who develop and use digital control solutions in the ‘Industry of the Future’ vision. The book also addresses to master and Ph.D. students enrolled in Engineering Sciences programs.
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer Nature. This book was released on 2022-06-02 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the peer reviewed papers presented at the 11th edition of the International Workshop on Service-oriented, Holonic and Multi-Agent Manufacturing Systems for the Industry of the Future, SOHOMA’21, organized on 18-19 November, 2021 by the Arts et Métiers Institute of Technology of Cluny, France in collaboration with University Politehnica of Bucharest (the CIMR Research Centre in Computer Integrated Manufacturing and Robotics), Polytechnic University Hauts-de-France (the LAMIH Laboratory of Industrial and Human Automation Control, Mechanical Engineering and Computer Science) and Polytechnic Institute of Bragança (the CeDRI Research Centre in Digitalization and Intelligent Robotics).
Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer. This book was released on 2019-08-02 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings book presents selected peer-reviewed papers from the 9th International Workshop on ‘Service Oriented, Holonic and Multi-agent Manufacturing Systems for the Industry of the Future’ organized by Universitat Politècnica de València, Spain, and held on October 3–4, 2019. The SOHOMA 2019 Workshop aimed to foster innovation in the digital transformation of manufacturing and logistics by promoting new concepts and methods and solutions through service orientation in holonic and agent-based control with distributed intelligence. The book provides insights into the theme of the SOHOMA’19 Workshop – ‘Smart anything everywhere – the vertical and horizontal manufacturing integration, ’ addressing ‘Industry of the Future’ (IoF), a term used to describe the 4th industrial revolution initiated by a new generation of adaptive, fully connected, analytical and highly efficient robotized manufacturing systems. This global IoF model describes a new stage of manufacturing, that is fully automatized and uses advanced information, communication and control technologies such as industrial IoT, cyber-physical production systems, cloud manufacturing, resource virtualization, product intelligence, and digital twin, edge and fog computing. It presents the IoF interconnection of distributed manufacturing entities using a ‘system-of-systems’ approach, discussing new types of highly interconnected and self-organizing production resources in the entire value chain; and new types of intelligent decision-making support based on from real-time production data collected from resources, products and machine learning processing. This book is intended for researchers and engineers working in the manufacturing value chain, and specialists developing computer-based control and robotics solutions for the ‘Industry of the Future’. It is also a valuable resource for master’s and Ph.D. students in engineering sciences programs.
Download or read book Service Oriented Holonic and Multi Agent Manufacturing Systems for Industry of the Future written by Damien Trentesaux and published by . This book was released on 2021 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book approaches its subject matter by promoting concepts, methods and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The scientific theme of the book concerns "Manufacturing as a Service", developed by virtualizing and encapsulating manufacturing resources, activities and controls into cloud networked services in an open perspective that spans models from shop floor resource allocation to enterprise infrastructure sharing. The papers included in the application space have a profound human dedication and aim at solving societal needs serving the partnership of the future-people and industry in the era of Society 5.0. The book's readership includes researchers and engineers working in manufacturing, supply chains and logistics areas who innovate, develop and use digital control solutions and students enrolled in Engineering and Service Science programs.
Download or read book Service Oriented Holonic and Multi Agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer. This book was released on 2024-03-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scientific theme of the book is “Sustainability for the digital manufacturing era” which is focused on how the technological enablers of digital systems drive the sustainability for products, processes, manufacturing, and logistics systems in the industry of the future. The book’s chapters describe sustainability drivers specific to the technological advances that motivate, encourage, and engage the economic, social, and environmental aspects within intelligent manufacturing and logistics systems. The novelty of this approach consists in extending the economic sustainability of digital manufacturing with the ethical perspective at human social scale. The general scope of the book is to foster innovation in smart and sustainable manufacturing and logistics systems and in this context to promote concepts, methods, and solutions for the digital transformation of manufacturing through service orientation in holonic and agent-based control with distributed intelligence. The book’s readership is comprised of researchers and engineers working in the value chain of products and processes, who develop digital control solutions in the “Industry of the Future” vision. The book is also addressed to master’s and Ph.D. students enrolled in Engineering Sciences programs.
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2018-01-31 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the seventh edition of the international workshop "Service Orientation in Holonic and Multi-Agent Manufacturing - SOHOMA'17", held on October 19-20, 2017 and organized by the University of Nantes, France in collaboration with the CIMR Research Centre in Computer Integrated Manufacturing and Robotics at the University Politehnica of Bucharest, Romania, the LAMIH Laboratory of Industrial and Human Automation Control, Mechanical Engineering and Computer Science at the University of Valenciennes and Hainaut-Cambrésis, France and the CRAN Research Centre for Automatic Control, Nancy at the University of Lorraine, France. The main objective of SOHOMA'17 was to foster innovation in smart and sustainable manufacturing and logistics systems and in this context to promote concepts, methods and solutions addressing trends in service orientation of agent-based control technologies with distributed intelligence. The book is organized in eight parts, each with a number of chapters describing research in current domains of the digital transformation in manufacturing and trends in future service and computing oriented manufacturing control: Part 1: Advanced Manufacturing Control, Part 2: Big Data Management, Part 3: Cyber-Physical Production Systems, Part 4: Cloud- and Cyber-Physical Systems for Smart and Sustainable Manufacturing, Part 5: Simulation for Physical Internet and Intelligent & Sustainable Logistics Systems, Part 6: Formal Methods and Advanced Scheduling for Future Industrial Systems, Part 7: Applications and Demonstrators, Part 8: Production and Logistic Control Systems. The contributions focus on how the digital transformation, such as the one advocated by "Industry 4.0" or "Industry of the future" concepts, can improve the maintainability and the sustainability of manufacturing processes, products, and logistics. Digital transformation relates to the interaction between the physical and informational worlds and is realized by virtualization of products, processes and resources managed as services.
Download or read book Service Orientation in Holonic and Multi agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2015-02-17 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the peer reviewed papers presented at the 4th edition of the International Workshop “Service Orientation in Holonic and Multi-agent Manufacturing – SOHOMA’14” organized and hosted on November 5-6, 2014 by the University of Lorraine, France in collaboration with the CIMR Research Centre of the University Politehnica of Bucharest and the TEMPO Laboratory of the University of Valenciennes and Hainaut-Cambrésis. The book is structured in six parts, each one covering a specific research line which represents a trend in future manufacturing: (1) Holonic and Agent-based Industrial Automation Systems; (2) Service-oriented Management and Control of Manufacturing Systems; (3) Distributed Modelling for Safety and Security in Industrial Systems; (4) Complexity, Big Data and Virtualization in Computing-oriented Manufacturing; (5) Adaptive, Bio-inspired and Self-organizing Multi-Agent Systems for Manufacturing and (6) Physical Internet Simulation, Modelling and Control. There is a clear orientation of the SOHOMA’14 workshop towards complexity, which is a common view of all six parts. There is need for a framework allowing the development of manufacturing cyber physical systems including capabilities for complex event processing and data analytics which are expected to move the manufacturing domain closer towards cloud manufacturing within contextual enterprises. Recent advances in sensor, communication and intelligent computing technologies made possible the Internet connectivity of the physical world: the Physical Internet, where not only documents and images are created, shared, or modified in the cyberspace, but also the physical resources and products interact over Internet and make decisions based on shared communication.
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing and Robotics written by Theodor Borangiu and published by Springer. This book was released on 2014-01-30 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the peer reviewed papers which were presented at the third edition of the International Workshop “Service Orientation in Holonic and Multi-agent Manufacturing and Robotics – SOHOMA’13” organized on June 20-22, 2013 by the Centre of Research in Computer Integrated Manufacturing and Robotics – CIMR Bucharest, and hosted by the University of Valenciennes, France. The book is structured in five parts, each one covering a specific research domain which represents a trend for modern manufacturing control: Distributed Intelligence for Sustainable Manufacturing, Holonic and Multi-Agent Technologies for Manufacturing Planning and Control; Service Orientation in Manufacturing Management and Control, Intelligent Products and Product-driven Automation and Robotics for Manufacturing and Services. These five evolution lines have in common concepts related to service orientation in a distributed planning and control agent-based industrial environment; today it is generally recognized that the Service Oriented Enterprise Architecture paradigm has been looked upon as a suitable and effective approach for industrial automation and management of manufacturing enterprises.
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2018-12-12 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the peer-reviewed papers presented at the 8th edition of the International Workshop “Service Orientation in Holonic and Multi-Agent Manufacturing – SOHOMA’18” held at the University of Bergamo, Italy on June 11–12, 2018. The objective of the SOHOMA annual workshops is to foster innovation in smart and sustainable manufacturing and logistics systems by promoting new concepts, methods and solutions that use service orientation of agent-based control technologies with distributed intelligence. Reflecting the theme of SOHOMA’18: “Digital transformation of manufacturing with agent-based control and service orientation of Internet-scale platforms”, the research included focuses on how the digital transformation, as advocated by the “Industry 4.0”, “Industrial Internet of Things”, “Cyber-Physical Production Systems” and “Cloud Manufacturing” frameworks, improves the efficiency, agility and sustainability of manufacturing processes, products, and services, and how it relates to the interaction between the physical and informational worlds, which is implemented in the virtualization of products, processes and resources managed as services.
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing written by Theodor Borangiu and published by Springer. This book was released on 2017-02-28 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book offers an integrated vision on Cloud and HPC, Big Data, Analytics and virtualization in computing-oriented manufacturing, combining information and communication technologies, service-oriented control of holonic architectures as well as enterprise integration solutions based on SOA principles. It is structured in eight parts, each one grouping research and trends in digital manufacturing and service oriented manufacturing control: Cloud and Cyber-Physical Systems for Smart Manufacturing, Reconfigurable and Self-organized Multi-Agent Systems for Industry and Service, Sustainability Issues in Intelligent Manufacturing Systems, Holonic and Multi-agent System Design for Industry and Service, Should Intelligent Manufacturing Systems be Dependable and Safe?, Service-oriented Management and Control of Manufacturing Systems, Engineering and Human Integration in Flexible and Reconfigurable Industrial Systems,Virtualization and Simulation in Computing-oriented Industry and Service. p>
Download or read book Service Orientation in Holonic and Multi Agent Manufacturing Control written by Theodor Borangiu and published by Springer Science & Business Media. This book was released on 2012-03-28 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Service orientation is emerging nowadays at multiple organizational levels in enterprise business, and it leverages technology in response to the growing need for greater business integration, flexibility and agility of manufacturing enterprises. The Service Oriented Architecture (SOA) analysed throughout the book represents a technical architecture, a business modelling concept, a type of infrastructure, an integration source and a new way of viewing units of automation within the enterprise. The primary goal of SOA is to align the business world with the world of information technology in a way that makes both more effective. The service value creation model at enterprise level consists of using a Service Component Architecture for business process applications, based on entities which handle services. In this view a service is a piece of software encapsulating the business/control logic or resource functionality of an enterprise entity that exhibits an individual competence and responds to a specific request to fulfil a local (operation) or global objective (batch production). The value creation model is based on a 2-stage approach: • Agentification: complex manufacturing processes are split in services provided by informational agents which are discovered, accessed and executed. This leads to a modular, reusable, agile and easy integrate integration. • Holonification: holons link the material flow and physical entities of the manufacturing processes with the informational part (IT services realized by distributed intelligence) facilitating thus traceability the developing of flexible control systems. This book gathers contributions from scientists, researchers and industrialists on concepts, methods, frameworks and implementing issues addressing trends in the service orientation of control technology and management applied to manufacturing enterprise. This book gathers contributions from scientists, researchers and industrialists on concepts, methods, frameworks and implementing issues addressing trends in the service orientation of control technology and management applied to manufacturing enterprise.
Download or read book Holonic and Multi Agent Systems for Manufacturing written by Vladimir Marik and published by Springer. This book was released on 2009-08-25 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The research of holonic and agent-based systems is developing very rapidly. The community around this R&D topic is also growing fast - despite the fact that the real-life practical implementations of such systems are still surprisingly rare. H- ever, the managers in different branches of industry feel that the holonic and agent-based systems represent the only way of managing and controlling very c- plex, highly distributed systems exploring vast volumes of accumulated knowledge. The relevant research and development activities gain more and more visible support from both industry as well as public sectors. Quite naturally, the number of scientific events aimed at the subject field is also growing rapidly. We see new lines of conf- ences like INDIN, we observe a strong focus of the already well-established conferences, e. g. , INCOM or ETFA, being shifted toward holonic and agent-based manufacturing systems. We see an increased interest of the IEEE System, Man and Cybernetics Society, especially its Technical Committee on Distributed Intelligent Systems which leverages the experience gathered by the members of the former Ho- nic Manufacuting Systems (HMS) consortium. We see a clear orientation of the IEEE SMC Transactions, part C, toward applications of agent-oriented solutions. The same is true of the International Journal on Autonomous Agents and Multi-Agent Systems (JAAMAS). This is a really good sign of the increasing importance of the field.
Download or read book Industrial Agents written by Paulo Leitão and published by Morgan Kaufmann. This book was released on 2015-03-13 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Agents explains how multi-agent systems improve collaborative networks to offer dynamic service changes, customization, improved quality and reliability, and flexible infrastructure. Learn how these platforms can offer distributed intelligent management and control functions with communication, cooperation and synchronization capabilities, and also provide for the behavior specifications of the smart components of the system. The book offers not only an introduction to industrial agents, but also clarifies and positions the vision, on-going efforts, example applications, assessment and roadmap applicable to multiple industries. This edited work is guided and co-authored by leaders of the IEEE Technical Committee on Industrial Agents who represent both academic and industry perspectives and share the latest research along with their hands-on experiences prototyping and deploying industrial agents in industrial scenarios. Learn how new scientific approaches and technologies aggregate resources such next generation intelligent systems, manual workplaces and information and material flow system Gain insight from experts presenting the latest academic and industry research on multi-agent systems Explore multiple case studies and example applications showing industrial agents in a variety of scenarios Understand implementations across the enterprise, from low-level control systems to autonomous and collaborative management units
Download or read book Holonic and Multi Agent Systems for Manufacturing written by Vladimir Marik and published by Springer. This book was released on 2004-01-24 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing complexity of manufacturing systems as well as the overall demands for flexible and fault-tolerant control of production processes stimulates (among many others) two key emerging technologies that are already making an important breakthrough in the field of intelligent manufacturing, control, and diagnostics. These two paradigms are: • the holonic approach based on the event-driven control strategy, usually aimed at modular control systems that are directly physically linked with the manufacturing hardware equipment, and • the multi-agent approach developed in the area of distributed information processing. The research communities working in both these fields are approaching the problem of intelligent manufacturing from different viewpoints and, until recently, to a certain extent, in an independent way. We can however observe quite a clear convergence of these fields in the last few years: the communities have started to cooperate, joining efforts to solve the painful problems involved in achieving effective industrial practice. We can see convergence in the terminology, standards and methods being applied.
Download or read book Holonic and Multi Agent Systems for Manufacturing written by Vladimír Mařík and published by Springer Science & Business Media. This book was released on 2011-08-19 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 5th International Conference on Industrial Applications of Holonic and Multi-Agent Systems, HoloMAS 2011, held in Toulouse, France, August 29-31, 2011. The 25 revised full papers presented were carefully reviewed and selected from 36 submissions. The papers are organized in topical sections on industrial agents, simulation and modelling, planning and scheduling, smart technical systems, and MAS for unmanned aerial vehicles.
