Download or read book Sensors in Bioprocess Control written by John Twork and published by CRC Press. This book was released on 2020-07-24 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the reader with an overview of current chemical sensor technology and outlines a framework relating industrial bioprocess monitoring to modern process control technology. It deals with conventional multivariable control technology, focusing on bioprocess applications.
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-03-03 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Development of soft sensors for monitoring and control of bioprocesses written by Robert Gustavsson and published by Linköping University Electronic Press. This book was released on 2018-10-31 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the manufacture of bio-therapeutics the importance of a well-known process is key for a high product titer and low batch to batch variations. Soft sensors are based on the concept that online sensor signals can be used as inputs to mathematical models to derive new valuable process information. This information could then be used for better monitoring and control of the bioprocess. The aim of the present thesis has been to develop soft sensor solutions for upstream bioprocessing and demonstrate their usefulness in improving robustness and increase the batch-to-batch reproducibility in bioprocesses. The thesis reviews the potential and possibilities with soft sensors for use in production of bio-therapeutics to realize FDA´s process analytical technology (PAT) initiative. Modelling and hardware sensor alternatives which could be used in a soft sensor setup are described and critically analyzed. Different soft sensor approaches to control glucose feeding in fed-batch cultures of Escherichia coli are described. Measurements of metabolic fluxes and specific carbon dioxide production was used as control parameters to increase product yield and decrease the variability of produced recombinant proteins. Metabolic heat signals were used in uninduced cultures to estimate and control the specific growth rate at a desired level and thereby also estimate the biomass concentration online. The introduction of sequential filtering of the signal enabled this method to be used in a down-scaled system. The risk and high impact of contaminations in cell cultures are also described. An in situ microscope (ISM) was used as an online tool to estimate cell concentration and also to determine cell diameter size which enabled the detection of contaminant cells at an early stage. The work presented in this thesis supports the idea that soft sensors can be a useful tool in the strive towards robust and reliable bioprocesses, to ensure high product quality and increased economic profit.
Download or read book Computational Intelligence Techniques for Bioprocess Modelling Supervision and Control written by Maria Carmo Nicoletti and published by Springer. This book was released on 2009-07-09 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Intelligence (CI) and Bioprocess are well-established research areas which have much to offer each other. Under the perspective of the CI area, Biop- cess can be considered a vast application area with a growing number of complex and challenging tasks to be dealt with, whose solutions can contribute to boosting the development of new intelligent techniques as well as to help the refinement and s- cialization of many of the already existing techniques. Under the perspective of the Bioprocess area, CI can be considered a useful repertoire of theories, methods and techniques that can contribute and offer interesting alternative approaches for solving many of its problems, particularly those hard to solve using conventional techniques. Although throughout the past years CI and Bioprocess areas have accumulated substantial specific knowledge and progress has been quick and with a high degree of success, we believe there is still a long way to go in order to use the potentialities of the available CI techniques and knowledge at their full extent, as tools for supporting problem solving in bioprocesses. One of the reasons is the fact that both areas have progressed steadily and have been continuously accumulating and refining specific knowledge; another reason is the high level of technical expertise demanded by each of them. The acquisition of technical skills, experience and good insights in either of the two areas is very demanding and a hard task to be accomplished by any professional.
Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists. This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems. * * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists * Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems * Comprehensive, single-authored * 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems * 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors * Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading * Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used * Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.
Download or read book Automatic Control of Bioprocesses written by Denis Dochain and published by John Wiley & Sons. This book was released on 2013-03-01 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Giving an overview of the challenges in the control of bioprocesses, this comprehensive book presents key results in various fields, including: dynamic modeling; dynamic properties of bioprocess models; software sensors designed for the on-line estimation of parameters and state variables; control and supervision of bioprocesses.
Download or read book Bioprocess Monitoring and Control written by Marie-Noelle Pons and published by Oxford University Press, USA. This book was released on 1992 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first comprehensive volume on bioprocess automation and control. It addresses bioprocess engineers and biotechnologists seeking information about new devices and advanced control techniques, including those who are not be specialists in process control. It also offers guidance for control engineers who are used to classical problems in mechanical, electrical, or chemical engineering but who may not be familiar with the specifics of nonlinear, time-dependent bioprocesses and the instrumentation required to monitor them. The book begins with the development and analysis of control structures and describes available biosensors. Underlying soft sensor estimation techniques are outlined along with methods for using derived information. The coverage of industrial applications treats both low-level control loops (temperature, pH, etc.) and high-level control strategies (setpoint optimization, optimal trajectories, adaptive control, etc.). The international team of authors detail each topic in a thorough and complete manner, and provide an important source of information for both experienced users and those new to computer controlled fermentation systems. The intended readership includes chemical, control and bioprocess engineers; biochemists and biologists; and graduate students in biotechnology.
Download or read book Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts written by Claire Komives and published by John Wiley & Sons. This book was released on 2018-12-27 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for industrial and academic researchers and development scientists in the life sciences industry, Bioprocessing Technology for Production of Biopharmaceuticals and Bioproducts is a guide to the tools, approaches, and useful developments in bioprocessing. This important guide: • Summarizes state-of-the-art bioprocessing methods and reviews applications in life science industries • Includes illustrative case studies that review six milestone bio-products • Discuses a wide selection of host strain types and disruptive bioprocess technologies
Download or read book Bioprocess Monitoring and Control written by Bernd Hitzmann and published by . This book was released on 2020-09-10 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process monitoring and control are fundamental to all processes; this holds especially for bioprocesses, due to their complex nature. Usually, bioprocesses deal with living cells, which have their own regulatory systems. It helps to adjust the cell to its environmental condition. This must not be the optimal condition that the cell needs to produce whatever is desired. Therefore, a close monitoring of the cell and its environment is essential to provide optimal conditions for production. Without measurement, no information of the current process state is obtained. In this book, methods and techniques are provided for the monitoring and control of bioprocesses. From new developments for sensors, the application of spectroscopy and modelling approaches, the estimation and observer implementation for ethanol production and the development and scale-up of various bioprocesses and their closed loop control information are presented. The processes discussed here are very diverse. The major applications are cultivation processes, where microorganisms were grown, but also an incubation process of bird's eggs, as well as an indoor climate control for humans, will be discussed. Altogether, in 12 chapters, nine original research papers and three reviews are presented.
Download or read book Bioanalysis and Biosensors for Bioprocess Monitoring written by Bernhard Sonnleitner and published by Springer. This book was released on 2003-06-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions by numerous experts
Download or read book Single Use Technology in Biopharmaceutical Manufacture written by Regine Eibl and published by John Wiley & Sons. This book was released on 2019-07-24 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authoritative guide to the principles, characteristics, engineering aspects, economics, and applications of disposables in the manufacture of biopharmaceuticals The revised and updated second edition of Single-Use Technology in Biopharmaceutical Manufacture offers a comprehensive examination of the most-commonly used disposables in the manufacture of biopharmaceuticals. The authors—noted experts on the topic—provide the essential information on the principles, characteristics, engineering aspects, economics, and applications. This authoritative guide contains the basic knowledge and information about disposable equipment. The author also discusses biopharmaceuticals’ applications through the lens of case studies that clearly illustrate the role of manufacturing, quality assurance, and environmental influences. This updated second edition revises existing information with recent developments that have taken place since the first edition was published. The book also presents the latest advances in the field of single-use technology and explores topics including applying single-use devices for microorganisms, human mesenchymal stem cells, and T-cells. This important book: • Contains an updated and end-to-end view of the development and manufacturing of single-use biologics • Helps in the identification of appropriate disposables and relevant vendors • Offers illustrative case studies that examine manufacturing, quality assurance, and environmental influences • Includes updated coverage on cross-functional/transversal dependencies, significant improvements made by suppliers, and the successful application of the single-use technologies Written for biopharmaceutical manufacturers, process developers, and biological and chemical engineers, Single-Use Technology in Biopharmaceutical Manufacture, 2nd Edition provides the information needed for professionals to come to an easier decision for or against disposable alternatives and to choose the appropriate system.
Download or read book Comprehensive Biotechnology written by and published by Elsevier. This book was released on 2019-07-17 with total page 4876 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biotechnology, Third Edition, Six Volume Set unifies, in a single source, a huge amount of information in this growing field. The book covers scientific fundamentals, along with engineering considerations and applications in industry, agriculture, medicine, the environment and socio-economics, including the related government regulatory overviews. This new edition builds on the solid basis provided by previous editions, incorporating all recent advances in the field since the second edition was published in 2011. Offers researchers a one-stop shop for information on the subject of biotechnology Provides in-depth treatment of relevant topics from recognized authorities, including the contributions of a Nobel laureate Presents the perspective of researchers in different fields, such as biochemistry, agriculture, engineering, biomedicine and environmental science
Download or read book Control in Bioprocessing written by Pablo A. López Pérez and published by John Wiley & Sons. This book was released on 2020-06-08 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: Closes the gap between bioscience and mathematics-based process engineering This book presents the most commonly employed approaches in the control of bioprocesses. It discusses the role that control theory plays in understanding the mechanisms of cellular and metabolic processes, and presents key results in various fields such as dynamic modeling, dynamic properties of bioprocess models, software sensors designed for the online estimation of parameters and state variables, and control and supervision of bioprocesses Control in Bioengineering and Bioprocessing: Modeling, Estimation and the Use of Sensors is divided into three sections. Part I, Mathematical preliminaries and overview of the control and monitoring of bioprocess, provides a general overview of the control and monitoring of bioprocesses, and introduces the mathematical framework necessary for the analysis and characterization of bioprocess dynamics. Part II, Observability and control concepts, presents the observability concepts which form the basis of design online estimation algorithms (software sensor) for bioprocesses, and reviews controllability of these concepts, including automatic feedback control systems. Part III, Software sensors and observer-based control schemes for bioprocesses, features six application cases including dynamic behavior of 3-dimensional continuous bioreactors; observability analysis applied to 2D and 3D bioreactors with inhibitory and non-inhibitory models; and regulation of a continuously stirred bioreactor via modeling error compensation. Applicable across all areas of bioprocess engineering, including food and beverages, biofuels and renewable energy, pharmaceuticals and nutraceuticals, fermentation systems, product separation technologies, wastewater and solid-waste treatment technology, and bioremediation Provides a clear explanation of the mass-balance–based mathematical modelling of bioprocesses and the main tools for its dynamic analysis Offers industry-based applications on: myco-diesel for implementing "quality" of observability; developing a virtual sensor based on the Just-In-Time Model to monitor biological control systems; and virtual sensor design for state estimation in a photocatalytic bioreactor for hydrogen production Control in Bioengineering and Bioprocessing is intended as a foundational text for graduate level students in bioengineering, as well as a reference text for researchers, engineers, and other practitioners interested in the field of estimation and control of bioprocesses.
Download or read book Measurement Monitoring Modelling and Control of Bioprocesses written by Carl-Fredrik Mandenius and published by Springer. This book was released on 2014-07-08 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automated Measurement and Monitoring of Bioprocesses: Key Elements of the M3C Strategy, by Bernhard Sonnleitner Automatic Control of Bioprocesses, by Marc Stanke, Bernd Hitzmann An Advanced Monitoring Platform for Rational Design of Recombinant Processes, by G. Striedner, K. Bayer Modelling Approaches for Bio-Manufacturing Operations, by Sunil Chhatre Extreme Scale-Down Approaches for Rapid Chromatography Column Design and Scale-Up During Bioprocess Development, by Sunil Chhatre Applying Mechanistic Models in Bioprocess Development, by Rita Lencastre Fernandes, Vijaya Krishna Bodla, Magnus Carlquist, Anna-Lena Heins, Anna Eliasson Lantz, Gürkan Sin and Krist V. Gernaey Multivariate Data Analysis for Advancing the Interpretation of Bioprocess Measurement and Monitoring Data, by Jarka Glassey Design of Pathway-Level Bioprocess Monitoring and Control Strategies Supported by Metabolic Networks, by Inês A. Isidro, Ana R. Ferreira, João J. Clemente, António E. Cunha, João M. L. Dias, Rui Oliveira Knowledge Management and Process Monitoring of Pharmaceutical Processes in the Quality by Design Paradigm, by Anurag S Rathore, Anshuman Bansal, Jaspinder Hans The Choice of Suitable Online Analytical Techniques and Data Processing for Monitoring of Bioprocesses, by Ian Marison, Siobhán Hennessy, Róisín Foley, Moira Schuler, Senthilkumar Sivaprakasam, Brian Freeland
Download or read book Bioreactors written by Goutam Saha and published by CRC Press. This book was released on 2017-12-01 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioreactors: Animal Cell Culture Control for Bioprocess Engineering presents the design, fabrication, and control of a new type of bioreactor meant especially for animal cell line culture. The new bioreactor, called the "see-saw bioreactor," is ideal for the growth of cells with a sensitive membrane. The see-saw bioreactor derives its name from its principle of operation in which liquid columns in either limb of the reactor alternately go up and down. The working volume of the reactor is small, to within 15 L. However, it can easily be scaled up for large production in volume of cell mass in the drug and pharmaceutical industries. The authors describe the principle of operation of the see-saw bioreactor and how to automatically control the bioprocess. They discuss different control strategies as well as the thorough experimental research they conducted on this prototype bioreactor in which they applied a time delay control for yield maximization. To give you a complete understanding of the design and development of the see-saw bioreactor, the authors cover the mathematical model they use to describe the kinetics of fermentation, the genetic algorithms used for deriving the optimal time trajectories of the bioprocess variables, and the corresponding control inputs for maximizing the product yield. One chapter is devoted to the application of time delay control. Following a description of the bioreactor’s working setup in the laboratory, the authors sum up their investigation and define the future scope of work in terms of design, control, and software sensors.
Download or read book Process Control Intensification and Digitalisation in Continuous Biomanufacturing written by Ganapathy Subramanian and published by John Wiley & Sons. This book was released on 2021-12-15 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing Explore new trends in continuous biomanufacturing with contributions from leading practitioners in the field With the increasingly widespread acceptance and investment in the ??technology, the last decade has demonstrated the utility of continuous ??processing in the pharmaceutical industry. In Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing, distinguished biotechnologist Dr. Ganapathy Subramanian delivers a comprehensive exploration of the potential of the continuous processing of biological products and discussions of future directions in advancing continuous processing to meet new challenges and demands in the manufacture of therapeutic products. A stand-alone follow-up to the editor’s Continuous Biomanufacturing: Innovative Technologies and Methods published in 2017, this new edited volume focuses on critical aspects of process intensification, process control, and the digital transformation of biopharmaceutical processes. In addition to topics like the use of multivariant data analysis, regulatory concerns, and automation processes, the book also includes: Thorough introductions to capacitance sensors to control feeding strategies and the continuous production of viral vaccines Comprehensive explorations of strategies for the continuous upstream processing of induced microbial systems Practical discussions of preparative hydrophobic interaction chromatography and the design of modern protein-A-resins for continuous biomanufacturing In-depth examinations of bioprocess intensification approaches and the benefits of single use for process intensification Perfect for biotechnologists, bioengineers, pharmaceutical engineers, and process engineers, Process Control, Intensification, and Digitalisation in Continuous Biomanufacturing is also an indispensable resource for chemical engineers seeking a one-stop reference on continuous biomanufacturing.
Download or read book Basic Biotechniques for Bioprocess and Bioentrepreneurship written by Arvind Kumar Bhatt and published by Academic Press. This book was released on 2023-02-03 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic Biotechniques for Bioprocess and Bioentrepreneurship deals with the entire field of industrial biotechnology, starting from the basic laboratory techniques to scale-up, process development, demonstration, and finally its commercialization. The book compiles currently scattered materials on this topic and updates this information based on practical experience and requirements. The book will be an ideal source for new entrepreneurs who wish to start their own commercial units. Offers guidance for readers/researchers/start-ups/entrepreneurs on how to develop new microbiological and biotechnical processes Focuses on basic knowledge and possible solutions to the practical difficulties at all levels in one place through understanding of basic techniques in lab, during bioprocess development, commercialization, technology transfer, marketing, and others which is presently not available in the field Provides multifaceted coverage, with industry insights from experienced practitioners and leaders in the field Gives possible best solutions to the practical difficulties at all levels, i.e. lab, scaleup, and commercial stage Addresses ethical and other regulatory issues
