Download or read book Introduction to Semiconductor Manufacturing Technology written by Hong Xiao and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Semiconductor Manufacturing Technology, IC Fabrication Technology, and Devices: Conventional Flow. This up-to-date text on semiconductor manufacturing processes takes into consideration the rapid development of the industry's technology. It thoroughly describes the complicated and new IC chip fabrication processes in detail with minimum mathematics, physics, and chemistry. Advanced technologies are covered along with older ones to assist students in understanding the development processes from a historic point of view.

Download or read book Semiconductor Manufacturing Technology written by Chue San Yoo and published by World Scientific. This book was released on 2008 with total page 483 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook contains all the materials that an engineer needs to know to start a career in the semiconductor industry. It also provides readers with essential background information for semiconductor research. It is written by a professional who has been working in the field for over two decades and teaching the material to university students for the past 15 years. It includes process knowledge from raw material preparation to the passivation of chips in a modular format.

Download or read book Fundamentals of Semiconductor Manufacturing and Process Control written by Gary S. May and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide to semiconductor manufacturing from processcontrol to yield modeling and experimental design Fundamentals of Semiconductor Manufacturing and Process Controlcovers all issues involved in manufacturing microelectronic devicesand circuits, including fabrication sequences, process control,experimental design, process modeling, yield modeling, and CIM/CAMsystems. Readers are introduced to both the theory and practice ofall basic manufacturing concepts. Following an overview of manufacturing and technology, the textexplores process monitoring methods, including those that focus onproduct wafers and those that focus on the equipment used toproduce wafers. Next, the text sets forth some fundamentals ofstatistics and yield modeling, which set the foundation for adetailed discussion of how statistical process control is used toanalyze quality and improve yields. The discussion of statistical experimental design offers readers apowerful approach for systematically varying controllable processconditions and determining their impact on output parameters thatmeasure quality. The authors introduce process modeling concepts,including several advanced process control topics such asrun-by-run, supervisory control, and process and equipmentdiagnosis. Critical coverage includes the following: * Combines process control and semiconductor manufacturing * Unique treatment of system and software technology and managementof overall manufacturing systems * Chapters include case studies, sample problems, and suggestedexercises * Instructor support includes electronic copies of the figures andan instructor's manual Graduate-level students and industrial practitioners will benefitfrom the detailed exami?nation of how electronic materials andsupplies are converted into finished integrated circuits andelectronic products in a high-volume manufacturingenvironment. An Instructor's Manual presenting detailed solutions to all theproblems in the book is available from the Wiley editorialdepartment. An Instructor Support FTP site is also available.

Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.

Download or read book Semiconductor Manufacturing Handbook written by Hwaiyu Geng and published by McGraw Hill Professional. This book was released on 2005-05-18 with total page 915 pages. Available in PDF, EPUB and Kindle. Book excerpt: WORLD-CLASS SEMICONDUCTOR MANUFACTURING EXPERTISE AT YOUR FINGERTIPS This is a comprehensive reference to the semiconductor manufacturing process and ancillary facilities -- from raw material preparation to packaging and testing, applying basics to emerging technologies. Readers charged with optimizing the design and performance of manufacturing processes will find all the information necessary to produce the highest quality chips at the lowest price in the shortest time possible. The Semiconductor Manufacturing Handbook provides leading-edge information on semiconductor wafer processes, MEMS, nanotechnology, and FPD, plus the latest manufacturing and automation technologies, including: Yield Management Automated Material Handling System Fab and Cleanroom Design and Operation Gas Abatement and Waste Treatment Management And much more Written by 60 international experts, and peer reviewed by a seasoned advisory board, this handbook covers the fundamentals of relevant technology and its real-life application and operational considerations for planning, implementing, and controlling manufacturing processes. It includes hundreds of detailed illustrations and a list of relevant books, technical papers, and websites for further research. This inclusive, wide-ranging coverage makes the Semiconductor Manufacturing Handbook the most comprehensive single-volume reference ever published in the field. STATE-OF-THE-ART SEMICONDUCTOR TECHNOLOGIES AND MANUFACTURING PROCESSES: SEMICONDUCTOR FUNDAMENTALS How Chips Are Designed and Made * Substrates * Copper and Low-k Dielectrics * Silicide Formation * Plasma * Vacuum * Photomask WAFER PROCESSING TECHNOLOGIES Microlithography * Ion Implantation * Etch * PVD/ALD * CVD * ECD * Epitaxy * CMP * Wet Cleaning FINAL MANUFACTURING Packaging * Grinding, Stress Relief, Dicing * Inspection, Measurement, and Testing NANOTECHNOLOGY, MEMS, AND FPD GAS AND CHEMICALS Specialty Gas System and DCA * Gas Abatement Systems * Chemical and Slurries Delivery System * Ultra Pure Water FAB YIELD, OPERATIONS, AND FACILITIES Yield Management * Automated Materials Handling System * Metrology * Six Sigma * Advanced Process Control * EHS * Fab Design and Construction * Cleanroom * Vibration and Acoustic Control * ESD * Airborne Molecular Control * Particle Monitoring * Wastewater Neutralization Systems

Download or read book Microchip Fabrication 5th Ed written by Peter Van Zant and published by McGraw Hill Professional. This book was released on 2004-06-09 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: The #1 book in the industry for more than 15 years! Utilizing a straightforward, math-free pathology, this is a novice-friendly guide to the semiconductor fabrication process from raw materials through shipping the finished, packaged device. Challenging quizzes and review summaries make this the perfect learning guide for technicians in training. * NEW chapter on nanotechnology * NEW sections on 300mm wafer processing * Processes and devices, and Green processing * Every chapter updated to reflect the latest processing techniques

Download or read book ESD Basics written by Steven H. Voldman and published by John Wiley & Sons. This book was released on 2012-10-22 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrostatic discharge (ESD) continues to impact semiconductor manufacturing, semiconductor components and systems, as technologies scale from micro- to nano electronics. This book introduces the fundamentals of ESD, electrical overstress (EOS), electromagnetic interference (EMI), electromagnetic compatibility (EMC), and latchup, as well as provides a coherent overview of the semiconductor manufacturing environment and the final system assembly. It provides an illuminating look into the integration of ESD protection networks followed by examples in specific technologies, circuits, and chips. The text is unique in covering semiconductor chip manufacturing issues, ESD semiconductor chip design, and system problems confronted today as well as the future of ESD phenomena and nano-technology. Look inside for extensive coverage on: The fundamentals of electrostatics, triboelectric charging, and how they relate to present day manufacturing environments of micro-electronics to nano-technology Semiconductor manufacturing handling and auditing processing to avoid ESD failures ESD, EOS, EMI, EMC, and latchup semiconductor component and system level testing to demonstrate product resilience from human body model (HBM), transmission line pulse (TLP), charged device model (CDM), human metal model (HMM), cable discharge events (CDE), to system level IEC 61000-4-2 tests ESD on-chip design and process manufacturing practices and solutions to improve ESD semiconductor chip solutions, also practical off-chip ESD protection and system level solutions to provide more robust systems System level concerns in servers, laptops, disk drives, cell phones, digital cameras, hand held devices, automobiles, and space applications Examples of ESD design for state-of-the-art technologies, including CMOS, BiCMOS, SOI, bipolar technology, high voltage CMOS (HVCMOS), RF CMOS, smart power, magnetic recording technology, micro-machines (MEMs) to nano-structures ESD Basics: From Semiconductor Manufacturing to Product Use complements the author’s series of books on ESD protection. For those new to the field, it is an essential reference and a useful insight into the issues that confront modern technology as we enter the Nano-electronic Era.

Download or read book Run to Run Control in Semiconductor Manufacturing written by James Moyne and published by CRC Press. This book was released on 2018-10-08 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: Run-to-run (R2R) control is cutting-edge technology that allows modification of a product recipe between machine "runs," thereby minimizing process drift, shift, and variability-and with them, costs. Its effectiveness has been demonstrated in a variety of processes, such as vapor phase epitaxy, lithography, and chemical mechanical planarization. The only barrier to the semiconductor industry's widespread adoption of this highly effective process control is a lack of understanding of the technology. Run to Run Control in Semiconductor Manufacturing overcomes that barrier by offering in-depth analyses of R2R control.

Download or read book Semiconductor Manufacturing Technology written by Michael Quirk and published by Pearson. This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, Quirk and Serda introduce the terminology, concepts, processes, products, and equipment commonly used in the manufacture of ultra large scale integrated (ULSI) semiconductors. The book provides helpful, up-to-date technical information about semiconductor manufacturing and strikes an effective balance between the process and equipment technology found in wafer fabrications. Topics include copper interconnect; dual damascene additive process for metallization; deep UV sub-micron photolithography (.18 micron and below); low-k dielectric processing; chemical mechanical planarization; a comprehensive model of manufacturing process; chemical-mechanical polish (CMP); and maintenance and troubleshooting. For practicing semiconductor manufacturing technicians or those interested in semiconductor manufacturing technology and processes.

Download or read book Contamination Free Manufacturing for Semiconductors and Other Precision Products written by Robert P. Donovan and published by CRC Press. This book was released on 2001-03-14 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recognizing the need for improved control measures in the manufacturing process of highly sensitized semiconductor technology, this practical reference provides in-depth and advanced treatment on the origins, procedures, and disposal of a variety of contaminants. It uses contemporary examples based on the latest hardware and processing apparatus to illustrate previously unavailable results and insights along with experimental and theoretical developments. Ensures the proper methods necessary to meet the standards established in the 1997 National Technology Roadmap for Semiconductors (NTRS)! Summarizing up-to-date control practices in the industry, Contamination-Free Manufacturing for Semiconductors and Other Precision Products: Details the physics and chemistry behind the mechanisms leading to contamination-induced failures Considers particles and molecular contaminants, including the entire spectrum of mass-based contaminants Outlines primary contamination problems and target control levels Reveals and offers solutions to inadequate areas of measurement capability and control technology Clarifies significant problems and decisions facing the industry by analyzing NTRS standards and contamination mechanisms Containing over 700 literature references, drawings, photographs, equations, and tables, Contamination-Free Manufacturing for Semiconductors and Other Precision Products is an essential reference for electrical and electronics, instrumentation, process, manufacturing, development, contamination control and quality engineers; physicists; and upper-level undergraduate and graduate students in these disciplines.

Download or read book X Ray Metrology in Semiconductor Manufacturing written by D. Keith Bowen and published by CRC Press. This book was released on 2018-10-03 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scales involved in modern semiconductor manufacturing and microelectronics continue to plunge downward. Effective and accurate characterization of materials with thicknesses below a few nanometers can be achieved using x-rays. While many books are available on the theory behind x-ray metrology (XRM), X-Ray Metrology in Semiconductor Manufacturing is the first book to focus on the practical aspects of the technology and its application in device fabrication and solving new materials problems. Following a general overview of the field, the first section of the book is organized by application and outlines the techniques that are best suited to each. The next section delves into the techniques and theory behind the applications, such as specular x-ray reflectivity, diffraction imaging, and defect mapping. Finally, the third section provides technological details of each technique, answering questions commonly encountered in practice. The authors supply real examples from the semiconductor and magnetic recording industries as well as more than 150 clearly drawn figures to illustrate the discussion. They also summarize the principles and key information about each method with inset boxes found throughout the text. Written by world leaders in the field, X-Ray Metrology in Semiconductor Manufacturing provides real solutions with a focus on accuracy, repeatability, and throughput.

Download or read book Handbook of Photomask Manufacturing Technology written by Syed Rizvi and published by CRC Press. This book was released on 2018-10-03 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the semiconductor industry attempts to increase the number of functions that will fit into the smallest space on a chip, it becomes increasingly important for new technologies to keep apace with these demands. Photomask technology is one of the key areas to achieving this goal. Although brief overviews of photomask technology exist in the literature, the Handbook of Photomask Manufacturing Technology is the first in-depth, comprehensive treatment of existing and emerging photomask technologies available. The Handbook of Photomask Manufacturing Technology features contributions from 40 internationally prominent authors from industry, academia, government, national labs, and consortia. These authors discuss conventional masks and their supporting technologies, as well as next-generation, non-optical technologies such as extreme ultraviolet, electron projection, ion projection, and x-ray lithography. The book begins with an overview of the history of photomask development. It then demonstrates the steps involved in designing, producing, testing, inspecting, and repairing photomasks, following the sequences observed in actual production. The text also includes sections on materials used as well as modeling and simulation. Continued refinements in the photomask-making process have ushered in the sub-wavelength era in nanolithography. This invaluable handbook synthesizes these refinements and provides the tools and possibilities necessary to reach the next generation of microfabrication technologies.

Download or read book A History of the World Semiconductor Industry written by Peter Robin Morris and published by IET. This book was released on 1990 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Development of the thermionic valve. Historical survey of early research in semiconductors. Development of the transistor. Major technical processes used in semiconductor device fabrication. Review of major factors affecting the growth of the United States semiconductor industry. Review of the factors affecting the growth of the Japanese and South Korean semiconductor industries. Review of the European semiconductor industry.

Download or read book III V Integrated Circuit Fabrication Technology written by Shiban Tiku and published by CRC Press. This book was released on 2016-04-27 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaAs processing has reached a mature stage. New semiconductor compounds are emerging that will dominate future materials and device research, although the processing techniques used for GaAs will still remain relevant. This book covers all aspects of the current state of the art of III-V processing, with emphasis on HBTs. It is aimed at practicing

Download or read book Fundamentals of Semiconductor Fabrication written by Gary S. May and published by John Wiley & Sons. This book was released on 2004 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This concise introduction to semiconductor fabrication technology covers everything professionals need to know, from crystal growth to integrated devices and circuits. Throughout, the authors address both theory and the practical aspects of each major fabrication step, including crystal growth, silicon oxidation, photolithography, etching, diffusion, ion implantation, and thin film deposition. The book integrates Computer Modeling & Simulation tools throughout. Process simulation is used as a tool for what-if analysis and discussion. Comprehensive coverage of process sequence helps readers connect individual steps into a cohesive whole."--

Download or read book Modern Manufacturing Technology written by Jitendra Kumar Katiyar and published by CRC Press. This book was released on 2021-12-03 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Manufacturing Technology: Spotlight on Future summarizes the emergence and development of modern manufacturing techniques (MMTs) with a focus on metallic and advanced material-based additive manufacturing technologies and their potential applications. Further, it explores advanced machining techniques for production of novel nanomaterials. The book also covers modern sophisticated techniques for the fabrication of ultrafine electronic devices such as micro-electromechanical systems (MEMS), nano-electromechanical systems (NEMS), semiconductors, and optical systems. A dedicated chapter on manufacturing technology for Industry 4.0 is included. Features: Describes the background of manufacturing techniques in brief including the advent of and introduction to MMTs Reviews various types of MMTs established in recent years and their accelerated growth and development innovation-driven applications Overviews the physical and chemical techniques used for nanomaterials production Explores the fabrication mechanisms of MEMS, NEMS, semiconductors and optical devices Provides a conceptual overview of additive manufacturing technologies This book is geared to undergraduate and postgraduate students and professionals in mechanical and manufacturing engineering, and the manufacturing industry.

Download or read book 21st Century Manufacturing written by Paul Kenneth Wright and published by Pearson. This book was released on 2001 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a conversational style, this book explores today's technologies and the future of manufacturing -- through details of the product design process, rapid prototyping, a survey of manufacturing techniques relevant to today's production of consumer electronics or electromechanical devices, and the field of Biotechnology. It gives readers a broader appreciation of the impact of manufacturing process and not just manufacturing per se. A overview of the broader issues includes: the time to market, development of a new product, launching products into the marketplace, quality control, and the impact of technology on the next generation of products. Chapter topics cover manufacturing analysis; product design, computer aided design, and solid modeling; solid freeform fabrication and rapid prototyping; semiconductor manufacturing; computer manufacturing; metal-products manufacturing; plastics-products manufacturing and system assembly; and biotechnology. For executive education courses, appealing to both engineering and business professionals.