Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.
Download or read book Semi Rigid Joints in Structural Steelwork written by Miklos Ivanyi and published by Springer. This book was released on 2014-05-04 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Definition of semi-rigid steel structural connections, classification and influence to the structural response of sway and non-sway steel frames. Sources of connection compliance, ductility and the application of the component method for characterization of the joint properties. Verification procedures for the available and the required capacity of joints and the design of semi-rigid steel structural connections. Application of the Finite Element Method for the simulation of the structural response of semi-rigid connections taking into account all prominent nonlinear phenomena (cf. e.g. contact, friction and plasticity).
Download or read book Structural Steel Semirigid Connections written by Ciro Faella and published by CRC Press. This book was released on 1999-10-27 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the semirigidity concept was introduced many years ago, steel structures are usually designed by assuming that beam-to-column joints are either pinned or rigid. Theses assumptions allow a great simplification in structural analysis and design-but they neglect the true behavior of joints. The economic and structural benefits of semirigid joints are well known and much has been written about their use in braced frames. However, they are seldom used by designers, because most semirigid connections have highly nonlinear behavior, so that the analysis and design of frames using them is difficult. In fact, the design problem becomes more difficult as soon as the true rotational behavior of beam-to-column joints is accounted for-the design problem requires many attempts to achieve a safe and economical solution. Structural Steel Semirigid Connections provides a comprehensive source of information on the design of semirigid frames, up to the complete detailing of beam-to-column connections, and focuses on the prediction of the moment-rotation curve of connections. This is the first work that contains procedures for predicting the connection plastic rotation supply-necessary for performing the local ductility control in nonlinear static and dynamic analyses. Extensive numerical examples clarify the practical application of the theoretical background. This exhaustive reference and the awareness it provides of the influence of joint rotational behavior on the elastic and inelastic responses of structures will greatly benefit researchers, professionals, and specification writing bodies devoted to structural steel.
Download or read book Stability Design of Steel Frames written by Wai-Kai Chen and published by CRC Press. This book was released on 2018-08-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stability Design of Steel Frames provides a summary of the behavior, analysis and design of structural steel members and frames with flexibly-jointed connections. The book presents the theory and design of structural stability and includes extensions of computer-based analyses for individual members in space with imperfections. It also shows how connection flexibility influences the behavior and design of steel frames and how designers must consider this in a limit-state analysis and design procedure. The clearly written text and extensive bibliography make this a practical book for advanced students, researchers and professionals in civil and structural engineering, as well as a useful supplement to traditional books on the theory and design of structural stability.
Download or read book Connections in Steel Structures written by R. Bjorhovde and published by CRC Press. This book was released on 1988-02-19 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.
Download or read book Structural Steelwork Connections written by Graham Wynford Owens and published by Butterworth-Heinemann. This book was released on 1989 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the design of structural steelwork connections combines a discussion of the philosophy of design, and its implementation in a range of applications to all types of connections used in structural steelwork. The book reflects the latest Standards and Codes of Practice.
Download or read book Proceedings of AICCE 19 written by Fadzli Mohamed Nazri and published by Springer Nature. This book was released on 2019-11-28 with total page 1635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the latest research, innovations, and applications in the field of civil engineering, as presented by leading national and international academics, researchers, engineers, and postgraduate students at the AWAM International Conference on Civil Engineering 2019 (AICCE’19), held in Penang, Malaysia on August 21-22, 2019. The book covers highly diverse topics in the main fields of civil engineering, including structural and earthquake engineering, environmental engineering, geotechnical engineering, highway and transportation engineering, water resources engineering, and geomatic and construction management. In line with the conference theme, “Transforming the Nation for a Sustainable Tomorrow”, which relates to the United Nations’ 17 Global Goals for Sustainable Development, it highlights important elements in the planning and development stages to establish design standards beneficial to the environment and its surroundings. The contributions introduce numerous exciting ideas that spur novel research directions and foster multidisciplinary collaborations between various specialists in the field of civil engineering.
Download or read book Semi rigid Connections Handbook written by Wai-Fah Chen and published by J. Ross Publishing. This book was released on 2011 with total page 1263 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and accessible introduction to the implementation of partially restrained connections in engineering practice.
Download or read book Connections in Steel Structures III written by Reidar Bjorhovde and published by Elsevier. This book was released on 1996-05-20 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book publishes the proceedings from the Third International Workshop on Connections in Steel Structures: Behaviour, Strength and Design held in Trento, Italy, 29-31 May 1995. The workshop brought together the world's foremost experts in steel connections research, development, fabrication and design. The scope of the papers reflects state-of-the-art issues in all areas of endeavour, and manages to bring together the needs of researchers as well as designers and fabricators. Topics of particular importance include connections for composite (steel-concrete) structures, evaluation methods and reliability issues for semi-rigid connections and frames, and the impact of extreme loading events such as those imposed by major earthquakes. The book highlights novel methods and applications in the field and ensures that designers and other members of the construction industry gain access to the new results and procedures.
Download or read book Handbook of Steel Connection Design and Details written by Akbar R. Tamboli and published by McGraw Hill Professional. This book was released on 2010 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the leading methods for connecting structural steel components, covering state-of-the-art techniques and materials, and includes new information on welding and connections. Hundreds of detailed examples, photographs, and illustrations are found throughout this handbook. --from publisher description.
Download or read book Recent Advances in Structural Engineering Volume 1 written by A. Rama Mohan Rao and published by Springer. This book was released on 2018-08-01 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of select papers presented at the Tenth Structural Engineering Convention 2016 (SEC-2016). It comprises plenary, invited, and contributory papers covering numerous applications from a wide spectrum of areas related to structural engineering. It presents contributions by academics, researchers, and practicing structural engineers addressing analysis and design of concrete and steel structures, computational structural mechanics, new building materials for sustainable construction, mitigation of structures against natural hazards, structural health monitoring, wind and earthquake engineering, vibration control and smart structures, condition assessment and performance evaluation, repair, rehabilitation and retrofit of structures. Also covering advances in construction techniques/ practices, behavior of structures under blast/impact loading, fatigue and fracture, composite materials and structures, and structures for non-conventional energy (wind and solar), it will serve as a valuable resource for researchers, students and practicing engineers alike.
Download or read book Practical Analysis for Semi rigid Frame Design written by Wai-Fah Chen and published by World Scientific. This book was released on 2000 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the recent progress in practical analysis for semi-rigid frame design in North America. This encompasses codes, databases, modeling, classification, analysis/design, and design tables and aids. Practical design methods include LRFD procedures, approximate procedures, computer-based procedures and the optimization process. The book can be used as a supplementary steel design textbook for graduate students, as a training book for a short course in steel design for practicing engineers, and as a reference book for consulting firms designing building structures.
Download or read book Modern Trends in Research on Steel Aluminium and Composite Structures written by Marian A. Giżejowski and published by Routledge. This book was released on 2021-06-09 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Trends in Research on Steel, Aluminium and Composite Structures includes papers presented at the 14th International Conference on Metal Structures 2021 (ICMS 2021, Poznań, Poland, 16-18 June 2021). The 14th ICMS summarised a few years’ theoretical, numerical and experimental research on steel, aluminium and composite structures, and presented new concepts. This book contains six plenary lectures and all the individual papers presented during the Conference. Seven plenary lectures were presented at the Conference, including "Research developments on glass structures under extreme loads", Parhp3D – The parallel MPI/openMPI implementation of the 3D hp-adaptive FE code", "Design of beam-to-column steel-concrete composite joints: from Eurocodes and beyond", "Stainless steel structures – research, codification and practice", "Testing, modelling and design of bolted joints – effect of size, structural properties, integrity and robustness", "Design of hybrid beam-to-column joints between RHS tubular columns and I-section beams" and "Selected aspects of designing the cold-formed steel structures". The individual contributions delivered by authors covered a wide variety of topics: – Advanced analysis and direct methods of design, – Cold-formed elements and structures, – Composite structures, – Engineering structures, – Joints and connections, – Structural stability and integrity, – Structural steel, metallurgy, durability and behaviour in fire. Modern Trends in Research on Steel, Aluminium and Composite Structures is a useful reference source for academic researchers, graduate students as well as designers and fabricators.
Download or read book Advanced Analysis of Steel Frames written by W.F. Chen and published by CRC Press. This book was released on 2018-01-18 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of the limit state approach to design in recent years has focused particular attention on two basic requirements: accurate information regarding the behavior of structures throughout the entire range of loading up to the ultimate strength, and simple practical procedures to enable engineers to assess this behavior. This book satisfies these requirements by providing practical analysis methods for the design of steel frames. The book contains a wide range of second-order analyses: from elastic to inelastic, rigid to semi-rigid connections, and simple plastic hinge method to sophisticated plastic-zone method. Computer programs for each analysis are provided in the form of a floppy disk for easy implementation. Sample problems are described and user's manuals are well documented for each program developed in the book.
Download or read book Connections Between Steel and Other Materials written by R. G. Ogden and published by Woodhead Publishing Limited. This book was released on 1996 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Matrix Methods of Structural Analysis written by R. K. Livesley and published by Elsevier. This book was released on 2013-10-22 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Matrix Methods of Structural Analysis, 2nd Edition deals with the use of matrix methods as standard tools for solving most non-trivial problems of structural analysis. Emphasis is on skeletal structures and the use of a more general finite element approach. The methods covered have natural links with techniques for automatic redundant selection in elastic analysis. This book is comprised of 11 chapters and begins with an introduction to the concepts and notation of matrix algebra, along with the value of a systematic approach; structure as an assembly of elements; boundaries and nodes; linearity and superposition; and how analytical methods are built up. The discussion then turns to the variables which form the basis of much of structural analysis, as well as the most important relationships between them. Subsequent chapters focus on the elastic properties of single elements; the equilibrium or displacement method; the equilibrium equations of a complete structure; plastic analysis and design; transfer matrices; and the analysis of non-linear structures. The compatibility or force method is also described. The final chapter considers the limits imposed by the size and accuracy of the computer used in structural analysis and how they can be extended. This monograph will be of interest to structural engineers and students of engineering.
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
