Download or read book Selective Hydrogenation of Multifunctional Organic Reactants in Three Phase Reactors written by Sanjeev Sharma and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Three phase Catalytic Reactors written by P. A. Ramachandran and published by Gordon & Breach Publishing Group. This book was released on 1983 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selective Hydrogenation of alpha beta alpha Beta unsaturated Aldehydes Towards Clean Synthesis Over Noble Metal Catalysts in Mass Transfer Efficient Three Phase Reactors written by Laiqi Zhang and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The hydrodynamics and mass transfer characteristics of a concurrent downflow contactor (CDC) are studied in this work in order to investigate the viability of this bubble column as a catalytic reactor for the hydrogenation of?,?-unsaturated aldehydes. Oxygen/water was used as the system throughout. In order to obtain reproducible results, a very effective gas-liquid separation method was conceived and developed after much trial and error work. Shutdown and deadleg gas holdup measuring methods were compared and it was found that the shutdown method is more reliable than the deadleg method. The hydrogenation of cinnamaldehyde using both in-house-prepared and commercial palladium, platinum and ruthenium catalysts was carried out in stirred tank reactors and cocurrent downflow reactors in order to study the kinetics and mass transfer characteristics and the selectivity towards the corresponding desired product, hydrocinnamaldehyde or cinnamyl alcohol. When palladium catalysts were used the desired product was hydrocinnamaldehyde. The effects of homogenous reactions, type of solvent, catalyst loading, temperature, pressure, reactant concentration and the effects of promoter or poison on the selectivity towards hydrocinnamaldehyde were investigated systematically. Aldehyde acetals were produced in polar solvents, but not in non-polar solvents. Two methods can be used to obtain hydrocinnamaldehyde selectivity without reduction of the carbonyl double bond: (1) by using non-polar solvents such as toluene; (2) by incorporating poisons or promoters into the reactant solution or onto the surface of the catalysts. 97% selectivity to hydrocinnamaldehyde was achieved. The effects of the solvent, temperature, pressure, catalyst loading, promoters, and reactants concentration on the kinetics were studied and the following reaction kinetics are proposed for the hydrogenation of cinnamaldehyde over non-modified palladium/charcoal catalysts in propan-2-ol and in toluene: Ra = kC\(_{Cat}\)C\(_{H2}\)C\(0_{CAL}\) The apparent activation energy varies with themperature range in propan-2-ol and is 65\(\pm\)5 kJ.mol\({-1}\) in toluene.
Download or read book Selective Catalytic Hydrogenation in a Structured Compact Multifunctional Reactor written by Xiaolei Fan and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Selective hydrogenation is an important class of chemical reactions for the production of speciality chemicals, pharmaceuticals and petrochemicals. The challenges in this type of reactions are to control selectivity in hydrogenation of poly-functional molecules, and avoid the possible risk of reaction runaway due to the high exothermisity. In this project the fundamentals of liquid-phase hydrogenation reactions in a structured compact multifunctional reactor were investigated. This technology represents an advance over the existing hydrogenation technologies because it exploits the effects of reduced characteristic paths of mass and heat transfer, attained in compact reactor architecture with mm-scale reaction channels and integrated static mixers and micro-heat exchangers. Catalysts based on mesoporous synthetic carbons were developed especially for preparing micro-packed beds in the compact reactor. The investigation resulted in fundamental information on reactor performance for selected model reactions, heat transfer efficiency of the integrated micro-heat exchangers, development of continuous tandem reaction, and evaluation of developed catalysts for hydrogenation and hydrodehalogenation reactions under the continuous flow conditions being used. The results demonstrate that the structured compact multifunctional reactor might be a promising technology to transfer conventional heterogeneous catalysis to flow regime.
Download or read book Selective Hydrogenation of alpha beta unsaturated Aldehydes Towards Clean Synthesis Over Noble Metal Catalysts in Mass Transfer Efficient Three Phase Reactors written by Laiqi Zhang and published by . This book was released on 1998 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The hydrodynamics and mass transfer characteristics of a concurrent downflow contactor (CDC) are studied in this work in order to investigate the viability of this bubble column as a catalytic reactor for the hydrogenation of ?,?-unsaturated aldehydes. Oxygen/water was used as the system throughout. In order to obtain reproducible results, a very effective gas-liquid separation method was conceived and developed after much trial and error work. Shutdown and deadleg gas holdup measuring methods were compared and it was found that the shutdown method is more reliable than the deadleg method. The hydrogenation of cinnamaldehyde using both in-house-prepared and commercial palladium, platinum and ruthenium catalysts was carried out in stirred tank reactors and cocurrent downflow reactors in order to study the kinetics and mass transfer characteristics and the selectivity towards the corresponding desired product, hydrocinnamaldehyde or cinnamyl alcohol. When palladium catalysts were used the desired product was hydrocinnamaldehyde. The effects of homogenous reactions, type of solvent, catalyst loading, temperature, pressure, reactant concentration and the effects of promoter or poison on the selectivity towards hydrocinnamaldehyde were investigated systematically. Aldehyde acetals were produced in polar solvents, but not in non-polar solvents. Two methods can be used to obtain hydrocinnamaldehyde selectivity without reduction of the carbonyl double bond: (1) by using non-polar solvents such as toluene; (2) by incorporating poisons or promoters into the reactant solution or onto the surface of the catalysts. 97% selectivity to hydrocinnamaldehyde was achieved. The effects of the solvent, temperature, pressure, catalyst loading, promoters, and reactants concentration on the kinetics were studied and the following reaction kinetics are proposed for the hydrogenation of cinnamaldehyde over non-modified palladium/charcoal catalysts in propan-2-ol and in toluene: Ra = kC\(-{Cat}\)C\(-{H2}\)C\( 0-{CAL}\) The apparent activation energy varies with themperature range in propan-2-ol and is 65\(\pm\)5 kJ.mol\( {-1}\) in toluene.
Download or read book A Study of Selective Hydrogenation of alpha beta unsaturated Aldehyde in Three Phase Reactors written by Wanida Koo-Amornpattana and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microporous Media written by Freddy Romm and published by CRC Press. This book was released on 2004-03-29 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microporous Media presents new developments from nearly a decade of advancement. Written by a leading researcher in the field, this reference provides examples of the most original scientific and technical research impacting studies in porosity and microporosity, and illustrates methods to forecast the properties of microporous structures for impro
Download or read book Nanostructured Multifunctional Materials written by Esteban A. Franceschini and published by CRC Press. This book was released on 2021-06-03 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of nanomaterials plays a fundamental role in current and future technology applications, particularly nanomaterials that have multiple functionalities. This book provides a broad overview of the effect of nanostructuring in the multifunctionality of different widely studied nanomaterials. This book is divided into four sections constituting a road map that groups materials sharing certain types of nanostructuring, including nanoporous, nanoparticled, 2D laminar nanomaterials, and computational methods for characterizations of nanostructures. This structured approach in nanomaterials research will serve as a valuable reference material for chemists, (bio)engineers, physicists, nanotechnologists, undergraduates, and professors.
Download or read book Metal Organic Framework Composites written by Anish Khan and published by Materials Research Forum LLC. This book was released on 2019-10-25 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of their nanoporous structures and ultra-high surface areas Metal-Organic Framework Composites (MOFs) are very interesting materials. The book focusses on the following applications: gas capture and storage, especially molecular hydrogen storage; performance enhancement of Li-ion batteries; gas separation, nano-filtration, ionic sieving, water treatment, and catalysis; sustainable renewable energy resources, electrochemical capacitors, including supercapacitors, asymmetric supercapacitors and hybrid supercapacitors; biomedical disciplines including drug delivery, theranostics; biological detection and imaging; nanoparticle photosensitizers for photodynamic therapy (PDT) and photothermal therapy (PTT). Keywords: MOF Materials, Hydrogen Storage, Renewable Energy Applications, Lithium Batteries, MOF-Quantum Dots, Clean Energy, Nanoporous MOFs, Supercapacitors, Therapeutic Applications, Biosensing, Bioimaging, Phototherapy of Cancer, Gas Separation, Nano-filtration, Ionic Sieving, Water Treatment, Drug Delivery, Theranostics; Nanoparticle Photosensitizers, Photodynamic Therapy (PDT), Photothermal Therapy (PTT).
Download or read book Fine Chemicals Manufacture written by A. Cybulski and published by Gulf Professional Publishing. This book was released on 2001 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sector of fine chemicals, including pharmaceuticals, agrochemicals, dyes and pigments, fragrances and flavours, intermediates, and performance chemicals is growing fast. For obvious reasons chemistry is a key to the success in developing new processes for fine chemicals. However, as a rule, chemists formulate results of their work as recipes, which usually lack important information for process development. Fine Chemicals Manufacture, Technology and Engineering is intended to show what is needed to make the recipe more useful for process development purposes and to transform the recipe into an industrial process that will be safe, environmentally friendly, and profitable.The goal of this book is to form a bridge between chemists and specialists of all other branches involved in the scale-up of new processes or modification of existing processes with both a minimum effort and risk and maximum profit when commercializing the process. New techniques for scale-up and optimization of existing processes and improvements in the utilization of process equipment that have been developed in recent years are presented in the book.
Download or read book Industrial Catalytic Processes for Fine and Specialty Chemicals written by Sunil S Joshi and published by Elsevier. This book was released on 2016-04-12 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Catalytic Processes for Fine and Specialty Chemicals provides a comprehensive methodology and state-of-the art toolbox for industrial catalysis. The book begins by introducing the reader to the interesting, challenging, and important field of catalysis and catalytic processes. The fundamentals of catalysis and catalytic processes are fully covered before delving into the important industrial applications of catalysis and catalytic processes, with an emphasis on green and sustainable technologies. Several case studies illustrate new and sustainable ways of designing catalysts and catalytic processes. The intended audience of the book includes researchers in academia and industry, as well as chemical engineers, process development chemists, and technologists working in chemical industries and industrial research laboratories. Discusses the fundamentals of catalytic processes, catalyst preparation and characterization, and reaction engineering Outlines the homogeneous catalytic processes as they apply to specialty chemicals Introduces industrial catalysis and catalytic processes for fine chemicals Includes a number of case studies to demonstrate the various processes and methods for designing green catalysts
Download or read book Nitroarenes written by Paul C. Howard and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prior to 1979, consideration of the problem of the carcinogenicity of the aromatic amine class of chemicals took place primarily in poster sessions and symposia of annual meetings of the American Association for Cancer Research and analogous international associations. In November 1979 the first meeting concerned with the aromatic amines was held in Rockville, Haryland under primary sponsorship of the National Cancer Institute. The proceedings from this meeting were published as Monograph 58 of the Journal of the National Cancel' Institute in 1981. The second meeting in this series, the Second International Conference on N-Substituted Aryl Compounds, was held in March/April of 1982 in Hot Springs, Arkansas. The National Cancer Institute and The National Center for Toxicological Research were the primary sponsors of this meeting. The proceedings were published as Volume 49 of the journal En-vil'onmental Health Perspectives in 1983. The third meeting in this series was held in April of 1987 at the Dearborn Hyatt in Dearborn, Michigan. The principal sponsor of this meeting was the Heyer L. Pre ntis Comprehensive Cancer Center of Metropolitan Detroit. The proceedings, Carcinogenic and Mutagenic Responses to Aromatic Amines and Nitroal'enes, were published in 1987 by Elsevier Press. The fourth meeting was held in Cleveland, Ohio, on July 15-19, 1989.
Download or read book Nitroso Compounds Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nitroso Compounds—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about Reactive Nitrogen Species in a concise format. The editors have built Nitroso Compounds—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Reactive Nitrogen Species in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Nitroso Compounds—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Microreaction Technology written by M. Matlosz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: IMRET 5 featured more than 80 oral and poster communications, covering the entire interdisciplinary field from design, production, modeling and characterization of microreactor devices to application of microstructured systems for production, energy and transportation, including many analytical and biological applications. A particularly strong topic was the investigation of the potential of microstructuring of reactors and systems components for process intensification. Perspectives of combining local, in situ, data acquisition with appropriate microstructuring of actuators and components within chemical and biological devices were explored in order to enhance process performance and facilitate process control.
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Heterogeneous Catalytic Materials written by Guido Busca and published by Newnes. This book was released on 2014-05-23 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heterogeneous Catalytic Materials discusses experimental methods and the latest developments in three areas of research: heterogeneous catalysis; surface chemistry; and the chemistry of catalysts. Catalytic materials are those solids that allow the chemical reaction to occur efficiently and cost-effectively. This book provides you with all necessary information to synthesize, characterize, and relate the properties of a catalyst to its behavior, enabling you to select the appropriate catalyst for the process and reactor system. Oxides (used both as catalysts and as supports for catalysts), mixed and complex oxides and salts, halides, sulfides, carbides, and unsupported and supported metals are all considered. The book encompasses applications in industrial chemistry, refinery, petrochemistry, biomass conversion, energy production, and environmental protection technologies. Provides a systematic and clear approach of the synthesis, solid state chemistry and surface chemistry of all solid state catalysts Covers widely used instrumental techniques for catalyst characterization, such as x-ray photoelectron spectroscopy, scanning electron microscopy, and more Includes characterization methods and lists all catalytic behavior of the solid state catalysts Discusses new developments in nanocatalysts and their advantages over conventional catalysts
