Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by MDPI. This book was released on 2018-12-14 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Selective Catalytic Reduction of NOx" that was published in Catalysts
Download or read book Selective Catalytic Reduction of NOx written by Oliver Kröcher and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The most efficient process to reduce NOx emissions from lean exhaust gases, selective catalytic reduction (SCR) with ammonia, has undergone tremendous development over the past decades. Originally only applied in stationary power plants and industrial installations, SCR systems are now installed in millions of mobile diesel engines, ranging from off-road machineries, to heavy-duty and light-duty trucks and passenger cars, to locomotives and ships. All of these applications involve specific challenges due to tighter emission limits, new internal combustion engine technologies, or alternative fuels. Three review articles and 14 research articles in this book describe recent results and research trends of various aspects of the SCR process. Reaction engineering aspects, such as the proper dosage of ammonia or urea, respectively, are as important as further developments of the different SCR catalysts, by deepening the understanding of their functionality or by systematic improvements of their properties, such as low-temperature activity, selectivity, or poisoning-resistance. Another covered aspect is cost reduction through the use of cheaper base materials for the production is active and stable SCR catalysts. Finally, research efforts are reported to develop SCR processes with different reducing agents, which would open doors to new applications in the future. The range of topics addressed in this book will stimulate the reader's interest as well as provide a valuable source of information for researchers in academia and industry.
Download or read book Nitrogen the Confer N s written by K. van der Hoek and published by Elsevier. This book was released on 2012-12-02 with total page 813 pages. Available in PDF, EPUB and Kindle. Book excerpt: The First International Nitrogen Conference provided an opportunity for researchers and decision-makers to exchange information on environmental pollution by nitrogen compounds on three scales: global, continental/regional and local. The main topics were air, ground water and surface water pollution; emission sources, atmospheric chemistry, deposition processes and effects; disturbance of nitrogen cycles, critical loads and levels; assessments, policy development and evaluation; target groups and abatement techniques; and new approaches leading to an integrated abatement strategy.The peer-reviewed papers from the Conference presented in this volume will provide readers with a comprehensive review of the transport, deposition and impact on ecosystems of nitrogen.
Download or read book Selective Catalytic Reduction Technology for the Control of Nitrogen Oxide Emissions from Coal Fired Boilers written by Gene Knight and published by DIANE Publishing. This book was released on 2008-08 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Clean Coal Technology Demo. Program (CCTDP) is an effort to demonstrate a new generation of innovative coal utilization processes in a series of facilities built across the country. These projects are carried out on a commercial scale to prove technical feasibility and provide the info. required for future applications. Projects have demonstrated technical options with the potential to meet the needs of energy markets while satisfying environ. requirements. Part of this program is the demo. of technologies designed to reduce emissions of oxides of nitrogen (NOx) from existing coal-fired utility boilers. This report summarizes the status of selective catalytic reduction (SCR) technology for the control of NOx emissions from high-sulfur, coal-fired boilers. Illus.
Download or read book Environmentally Benign Catalysts written by Anjali Patel and published by Springer Science & Business Media. This book was released on 2013-08-21 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past twenty years, Catalysis by Heteropolyacids (HPAs) has received wide attention and led to new and promising developments both at academic and industrial level. In particular, heterogeneous catalysis is particularly attractive because it generally satisfies most of green chemistry’s requirements. By emphasizing the development of third generation catalysts, this volume presents trends and opportunities in academic and industrial research. The book appeals to postgraduates, researchers, and chemists working in the field of environmentally benign catalysts as well as catalytic processes.
Download or read book Urea SCR Technology for deNOx After Treatment of Diesel Exhausts written by Isabella Nova and published by Springer Science & Business Media. This book was released on 2014-03-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urea-SCR Technology for deNOx After Treatment of Diesel Exhausts presents a complete overview of the selective catalytic reduction of NOx by ammonia/urea. The book starts with an illustration of the technology in the framework of the current context (legislation, market, system configurations), covers the fundamental aspects of the SCR process (catalysts, chemistry, mechanism, kinetics) and analyzes its application to useful topics such as modeling of full scale monolith catalysts, control aspects, ammonia injections systems and integration with other devices for combined removal of pollutants.
Download or read book Selective Catalytic Reduction and NOx Control in Japan written by Gary Dair Jones and published by . This book was released on 1981 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Petrodiesel Fuels written by Ozcan Konur and published by Handbook of Biodiesel and Petrodiesel Fuels. This book was released on 2023-09-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a three volume set on petrodiesel and biodiesel fuels. It examines petrodiesel fuels and its surrounding topics including desulfurization of petrodiesel fuels, diesel engines, performance and emissions of petrodiesel fuels, health impact of petrodiesel fuels, electricity production by petrodiesel fuels, and crude oils.
Download or read book Metal Oxides in Heterogeneous Catalysis written by Jacques C. Vedrine and published by Elsevier. This book was released on 2018-01-11 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxides in Heterogeneous Catalysis is an overview of the past, present and future of heterogeneous catalysis using metal oxides catalysts. The book presents the historical, theoretical, and practical aspects of metal oxide-based heterogeneous catalysis. Metal Oxides in Heterogeneous Catalysis deals with fundamental information on heterogeneous catalysis, including reaction mechanisms and kinetics approaches.There is also a focus on the classification of metal oxides used as catalysts, preparation methods and touches on zeolites, mesoporous materials and Metal-organic frameworks (MOFs) in catalysis. It will touch on acid or base-type reactions, selective (partial) and total oxidation reactions, and enzymatic type reactions The book also touches heavily on the biomass applications of metal oxide catalysts and environmentally related/depollution reactions such as COVs elimination, DeNOx, and DeSOx. Finally, the book also deals with future trends and prospects in metal oxide-based heterogeneous catalysis. - Presents case studies in each chapter that provide a focus on the industrial applications - Includes fundamentals, key theories and practical applications of metal oxide-based heterogeneous catalysis in one comprehensive resource - Edited, and contributed, by leading experts who provide perspectives on synthesis, characterization and applications
Download or read book Selective Catalytic Reduction of NOx written by Deborah W. Dayton and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nitrogen oxides NOx why and how they are controlled written by and published by DIANE Publishing. This book was released on 1999 with total page 57 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Oxygen Enhanced Combustion written by Charles E. Baukal Jr. and published by CRC Press. This book was released on 2013-03-15 with total page 779 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion-new technologies that produce oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include less pollutant emissi
Download or read book Selective Catalytic Reduction of NOx by Ammonia Using ITQ 21 Catalysts written by Komsit Pinchanchaiyoth and published by . This book was released on 2006 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Oxide Powder Technologies written by Yarub Al-Douri and published by Elsevier. This book was released on 2020-06-02 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal Oxide Powder Technologies: Fundamentals, Processing Methods and Applications reviews the fundamentals, processing methods and applications of this key materials system. Topics addressed comprehensively cover chemical and physical properties, synthesis, preparation, both accepted and novel processing methods, modeling and simulation. The book provides fundamental information on the key properties that impact performance, such as particle size and crystal structure, along with methods to measure, analyze and evaluate. Finally, important applications are covered, including biomedical, energy, electronics and materials applications. Provides a comprehensive overview of key topics both on the theoretical side and the experimental Discusses important properties that impact metal oxide performance, processing methods (both novel and accepted), and important applications Reviews the most relevant applications, such as biomedical, energy, electronics and materials applications
Download or read book Controlling Nitrogen Oxides written by Alice Hastings and published by . This book was released on 1980 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Selective Catalytic Reduction of NOx Emissions written by Electric Power Research Institute and published by . This book was released on 1995 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Non CO2 Greenhouse Gases Scientific Understanding Control and Implementation written by J. van Ham and published by Springer Science & Business Media. This book was released on 2000-03-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the climate change discussion, non-CO2 greenhouse gases (NCGGs) received official political recognition for the first time in 1997, when agreement was reached on the Kyoto Protocol. As a result methane, nitrous oxide, HFCs, PFCs and SF6 now provide attractive options for detailing the national targets for the reduction of greenhouse gas emissions meant to control climate change. This book is the second volume in this area and addresses three main topics. Firstly, it documents progress with respect to our knowledge of the sources and sinks of NCGGs. Information on this subject is essential in order to reduce the uncertainties in national emissions inventories which serve as the reference values for commitments of countries in the framework of the Kyoto Protocol. Secondly, this volume deals with the control options for the NCGGs and contains a wealth of information in this area. Emerging technologies here provide business opportunities, in particular in connection with the flexible mechanisms for mitigation projects in developing countries which have been agreed in Kyoto. Thirdly, the book treats the policy implementation of mitigation options for greenhouse gas emissions. Tools for control policies, both on the national and international level, and for different sectors of industry are discussed. National integrated approaches, including the ones from the United States Environmental Protection Agency and the Netherlands Ministry of Environment which both sponsored the conference, provide guidance for defining the most effective greenhouse gases mitigation plans in different situations. This volume is being published in support of the IPCC Process and will serve as a reference for IPCC's Third Assessment Report.
