Download or read book Seismic Risk Analysis and Management of Structure Systems written by Xiaowei Wang and published by . This book was released on 2024-06-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reprint is to immerse the readers in the latest knowledge and technologies on seismic risk analysis and the management of structure systems. Traditional deterministic approaches are on course to be replaced by risk-based methods for the seismic analysis and design of structures and infrastructure systems. A noted merit of risk analysis is the provision of a broader set of rigorous performance indicators accounting for various sources of uncertainties involved in earthquake hazard analysis, infrastructure exposure modeling, and structural damage assessment, particularly from a view of life cycle management for aging infrastructure facilities under an increasingly deteriorating built environment. A reliable risk analysis is therefore crucial for pre-event planning and post-event restoration decision-making. This reprint paves the way towards advanced and cutting-edge knowledge and technologies for the risk analysis and management of structure systems, including but not limited to bridges and buildings.
Download or read book Handbook of Seismic Risk Analysis and Management of Civil Infrastructure Systems written by S Tesfamariam and published by Elsevier. This book was released on 2013-04-30 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes represent a major risk to buildings, bridges and other civil infrastructure systems, causing catastrophic loss to modern society. Handbook of seismic risk analysis and management of civil infrastructure systems reviews the state of the art in the seismic risk analysis and management of civil infrastructure systems. Part one reviews research in the quantification of uncertainties in ground motion and seismic hazard assessment. Part twi discusses methodologies in seismic risk analysis and management, whilst parts three and four cover the application of seismic risk assessment to buildings, bridges, pipelines and other civil infrastructure systems. Part five also discusses methods for quantifying dependency between different infrastructure systems. The final part of the book considers ways of assessing financial and other losses from earthquake damage as well as setting insurance rates. Handbook of seismic risk analysis and management of civil infrastructure systems is an invaluable guide for professionals requiring understanding of the impact of earthquakes on buildings and lifelines, and the seismic risk assessment and management of buildings, bridges and transportation. It also provides a comprehensive overview of seismic risk analysis for researchers and engineers within these fields. This important handbook reviews the wealth of recent research in the area of seismic hazard analysis in modern earthquake design code provisions and practices Examines research into the analysis of ground motion and seismic hazard assessment, seismic risk hazard methodologies Addresses the assessment of seismic risks to buildings, bridges, water supply systems and other aspects of civil infrastructure
Download or read book Seismic Risk Analysis of Structural Systems written by Armen Der Kiureghian and published by . This book was released on 1980 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Risk Analysis of Bridge Structural Systems written by Abdallah Mechakhchekh and published by . This book was released on 2008 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Hazard and Risk Analysis written by Jack Baker and published by Cambridge University Press. This book was released on 2021-10-21 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic hazard and risk analyses underpin the loadings prescribed by engineering design codes, the decisions by asset owners to retrofit structures, the pricing of insurance policies, and many other activities. This is a comprehensive overview of the principles and procedures behind seismic hazard and risk analysis. It enables readers to understand best practises and future research directions. Early chapters cover the essential elements and concepts of seismic hazard and risk analysis, while later chapters shift focus to more advanced topics. Each chapter includes worked examples and problem sets for which full solutions are provided online. Appendices provide relevant background in probability and statistics. Computer codes are also available online to help replicate specific calculations and demonstrate the implementation of various methods. This is a valuable reference for upper level students and practitioners in civil engineering, and earth scientists interested in engineering seismology.
Download or read book Seismic Risk Analysis of Nuclear Power Plants written by Wei-Chau Xie and published by Cambridge University Press. This book was released on 2019-04-18 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Risk Analysis of Nuclear Power Plants addresses the needs of graduate students in engineering, practicing engineers in industry, and regulators in government agencies, presenting the entire process of seismic risk analysis in a clear, logical, and concise manner. It offers a systematic and comprehensive introduction to seismic risk analysis of critical engineering structures focusing on nuclear power plants, with a balance between theory and applications, and includes the latest advances in research. It is suitable as a graduate-level textbook, for self-study, or as a reference book. Various aspects of seismic risk analysis - from seismic hazard, demand, and fragility analyses to seismic risk quantification, are discussed, with detailed step-by-step analysis of specific engineering examples. It presents a wide range of topics essential for understanding and performing seismic risk analysis, including engineering seismology, probability theory and random processes, digital signal processing, structural dynamics, random vibration, and engineering risk and reliability.
Download or read book Risk Analysis and Seismic Safety of Existing Buildings written by and published by . This book was released on 1986 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resilient Structures and Infrastructure written by Ehsan Noroozinejad Farsangi and published by Springer. This book was released on 2019-05-03 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses resilience in terms of structures’ and infrastructures’ responses to extreme loading conditions. These include static and dynamic loads such as those generated by blasts, terrorist attacks, seismic events, impact loadings, progressive collapse, floods and wind. In the last decade, the concept of resilience and resilient-based structures has increasingly gained in interest among engineers and scientists. Resilience describes a given structure’s ability to withstand sudden shocks. In other words, it can be measured by the magnitude of shock that a system can tolerate. This book offers a valuable resource for the development of new engineering practices, codes and regulations, public policy, and investigation reports on resilience, and provides broad and integrated coverage of the effects of dynamic loadings, and of the modeling techniques used to compute the structural response to these loadings.
Download or read book Seismic Hazard and Risk Assessment written by Radu Vacareanu and published by Springer. This book was released on 2018-03-21 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the best contributions presented during the 6th National Conference on Earthquake Engineering and the 2nd National Conference on Earthquake Engineering and Seismology - 6CNIS & 2CNISS, that took place on June 14-17, 2017 in Bucharest - Romania, at the Romanian Academy and Technical University of Civil Engineering of Bucharest. The book offers an updated overview of seismic hazard and risk assessment activities, with an emphasis on recent developments in Romania, a very challenging case study because of its peculiar intermediate-depth seismicity and evolutive code-compliant building stock. Moreover, the book collects input of renowned scientists and professionals from Germany, Greece, Italy, Japan, Netherlands, Portugal, Romania, Spain, Turkey and United Kingdom.The content of the book focuses on seismicity of Romania, geotechnical earthquake engineering, structural analysis and seismic design regulations, innovative solutions for seismic protection of building structures, seismic risk evaluation, resilience-based assessment of structures and management of emergency situations. The sub-chapters consist of the best papers of 6CNIS & 2CNISS selected by the International Advisory and Scientific Committees. The book is targeted at researchers and experts in seismic hazard and risk, evaluation and rehabilitation of buildings and structures, insurers and re-insurers, and decision makers in the field of emergency situations and recovery activities.
Download or read book Risk Analysis IV written by C. A. Brebbia and published by WIT Press (UK). This book was released on 2004 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The Transactions of Wessex Institute"--Pref.
Download or read book Seismic Vulnerability Assessment of Civil Engineering Structures at Multiple Scales written by Tiago Miguel Ferreira and published by Woodhead Publishing. This book was released on 2021-12-02 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Vulnerability Assessment of Civil Engineering Structures at Multiple Scales: From Single Buildings to Large-Scale Assessment provides an integrated, multiscale platform for fundamental and applied studies on the seismic vulnerability assessment of civil engineering structures, including buildings with different materials and building typologies. The book shows how various outputs obtained from different scales and layers of assessment (from building scale to the urban area) can be used to outline and implement effective risk mitigation, response and recovery strategies. In addition, it highlights how significant advances in earthquake engineering research have been achieved with the rise of new technologies and techniques. The wide variety of construction and structural systems associated with the complex behavior of their materials significantly limits the application of current codes and building standards to the existing building stock, hence this book is a welcomed guide on new construction standards and practices. Provides the theoretical backgrounds on the most advanced seismic vulnerability assessment approaches at different scales and for most common building typologies Covers the most common building typologies and the materials they are made from, such as concrete, masonry, steel, timber and raw earth Presents practical guidelines on how the outputs coming from such approaches can be used to outline effective risk mitigation and emergency planning strategies
Download or read book Seismic Risk Assessment and Retrofitting written by Alper Ilki and published by Springer Science & Business Media. This book was released on 2009-10-03 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many more people are coming to live in earthquake-prone areas, especially urban ones. Many such areas contain low-rise, low-cost housing, while little money is available to retrofit the buildings to avoid total collapse and thus potentially save lives. The lack of money, especially in developing countries, is exacerbated by difficulties with administration, implementation and public awareness. The future of modern earthquake engineering will come to be dominated by new kinds of measuring technologies, new materials developed especially for low-rise, low-cost buildings, simpler and thus lower cost options for retrofitting, cost cutting and raising public awareness. The book covers all the areas involved in this complex issue, from the prevention of total building collapse, through improvement techniques, to legal, financial, taxation and social issues. The contributors have all made valuable contributions in their own particular fields; all of them are or have been closely involved with the issues that can arise in seismic zones in any country. The recent research results published here offer invaluable pointers to practicing engineers and administrators, as well as other scientists whose work involves saving the lives and property of the many millions of people who live and work in hazardous buildings.
Download or read book Safety Reliability Risk and Life Cycle Performance of Structures and Infrastructures written by George Deodatis and published by CRC Press. This book was released on 2014-02-10 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures contains the plenary lectures and papers presented at the 11th International Conference on STRUCTURAL SAFETY AND RELIABILITY (ICOSSAR2013, New York, NY, USA, 16-20 June 2013), and covers major aspects of safety, reliability, risk and life-cycle performance of str
Download or read book SYNER G Typology Definition and Fragility Functions for Physical Elements at Seismic Risk written by K. Pitilakis and published by Springer Science & Business Media. This book was released on 2014-01-20 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fragility functions constitute an emerging tool for the probabilistic seismic risk assessment of buildings, infrastructures and lifeline systems. The work presented in this book is a partial product of a European Union funded research project SYNER-G (FP7 Theme 6: Environment) where existing knowledge has been reviewed in order to extract the most appropriate fragility functions for the vulnerability analysis and loss estimation of the majority of structures and civil works exposed to earthquake hazard. Results of other relevant European projects and international initiatives are also incorporated in the book. In several cases new fragility and vulnerability functions have been developed in order to better represent the specific characteristics of European elements at risk. Several European and non-European institutes and Universities collaborated efficiently to capitalize upon existing knowledge. State-of-the-art methods are described, existing fragility curves are reviewed and, where necessary, new ones are proposed for buildings, lifelines, transportation infrastructures as well as for utilities and critical facilities. Taxonomy and typology definitions are synthesized and the treatment of related uncertainties is discussed. A fragility function manager tool and fragility functions in electronic form are provided on extras.springer.com. Audience The book aims to be a standard reference on the fragility functions to be used for the seismic vulnerability and probabilistic risk assessment of the most important elements at risk. It is of particular interest to earthquake engineers, scientists and researchers working in the field of earthquake risk assessment, as well as the insurance industry, civil protection and emergency management agencies.
Download or read book Earthquake Risk Reduction written by David J. Dowrick and published by John Wiley & Sons. This book was released on 2003-09-12 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing theory and field experience, this book covers all the main subject areas in earthquake risk reduction, ranging from geology, seismology, structural and soil dynamics to hazard and risk assessment, risk management and planning, engineering and the architectural design of new structures and equipment. Earthquake Risk Reduction outlines individual national weaknesses that contribute to earthquake risk to people and property; calculates the seismic response of soils and structures, using the structural continuum 'Subsoil - Substructure - Superstructure - Non-structure'; evaluates the effectiveness of given designs and construction procedures for reducing casualties and financial losses; provides guidance on the key issue of choice of structural form; presents earthquake resistant designs methods for the four main structural materials - steel, concrete, reinforced masonry and timber - as well as for services equipment, plant and non-structural architectural components; contains a chapter devoted to problems involved in improving (retrofitting) the existing built environment. Compiled from the author's extensive professional experience in earthquake engineering, this key text provides an excellent treatment of the complex multidisciplinary process of earthquake risk reduction. This book will prove an invaluable reference and guiding tool to practicing civil and structural engineers and architects, researchers and postgraduate students in seismology, local governments and risk management officials.
Download or read book Reliability and Optimization of Structural Systems written by Daniel Straub and published by CRC Press. This book was released on 2010-07-28 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 28 papers by renowned international experts on the latest advances in structural reliability methods and applications, engineering risk analysis and decision making, new optimization techniques and various applications in civil engineering. Moreover, several contributions focus on the assessment and optimization of existing str
Download or read book Maintenance Safety Risk Management and Life Cycle Performance of Bridges written by Nigel Powers and published by CRC Press. This book was released on 2018-07-04 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Maintenance, Safety, Risk, Management and Life-Cycle Performance of Bridges contains lectures and papers presented at the Ninth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2018), held in Melbourne, Australia, 9-13 July 2018. This volume consists of a book of extended abstracts and a USB card containing the full papers of 393 contributions presented at IABMAS 2018, including the T.Y. Lin Lecture, 10 Keynote Lectures, and 382 technical papers from 40 countries. The contributions presented at IABMAS 2018 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of bridge maintenance, safety, risk, management and life-cycle performance. Major topics include: new design methods, bridge codes, heavy vehicle and load models, bridge management systems, prediction of future traffic models, service life prediction, residual service life, sustainability and life-cycle assessments, maintenance strategies, bridge diagnostics, health monitoring, non-destructive testing, field testing, safety and serviceability, assessment and evaluation, damage identification, deterioration modelling, repair and retrofitting strategies, bridge reliability, fatigue and corrosion, extreme loads, advanced experimental simulations, and advanced computer simulations, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of more rational decision-making on bridge maintenance, safety, risk, management and life-cycle performance of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers and engineers from all areas of bridge engineering.
