Download or read book Seismic Isolation and Response Control written by Eftychia Apostolidi and published by International Association for Bridge and Structural Engineering. This book was released on 2021-12-15 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seismic resilience of new and existing structures is a key priority for the protection of human lives and the reduction of economic losses in earthquake prone areas. The modern seismic codes have focused on the upgrade of the structural performance of the new and existing structures. However, in many cases it is preferrable to mitigate the effects of the earthquakes by reducing the induced loads in the structures using seismic isolation and response control devices. The limited expertise in the selection and design of the appropriate system for new and existing structures is the main challenge for an extensive use of seismic isolation and response control systems in practice. This document aims to provide a practical guide by presenting a collection of the most commonly used seismic isolation and response control systems and a critical evaluation of the main characteristics of these systems. Comparisons of the key parameters of the design processes for new buildings with seismic isolation are presented, while the application of seismic isolation systems and response control systems for the retrofitting of existing structures is also examined, followed by various case studies from Greece, Japan, Mexico, New Zealand, and Turkey.
Download or read book Response Control and Seismic Isolation of Buildings written by Masahiko Higashino and published by Routledge. This book was released on 2006-09-27 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state of the art report from an international task group (TG44) of CIB, the International Council of Building Research Organizations, presents a highly authoritative guide to the application of innovative technologies on response control and seismic isolation of buildings to practice worldwide. Many countries and cities are located in earthquake-prone areas making effective seismic design a major issue in structural engineering. Reassuringly, structural response control and seismic isolation have advanced remarkably in recent years following numerous studies internationally. Several major conferences have been held and reports have been written but little has been issued on the application of the technologies to good structural engineering practice. Plugging that gap, Response Control and Seismic Isolation of Buildings presents researchers in structural engineering (dynamics) and construction management with up-to-date applications of the latest technologies.
Download or read book Response Control and Seismic Isolation of Buildings written by Masahiko Higashino and published by . This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Isolation and Response Control written by Eftychia Apostolidi and published by Structural Engineering Documents. This book was released on 2021-12-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seismic resilience of new and existing structures is a key priority for the protection of human lives and the reduction of economic losses in earthquake-prone areas. The modern seismic codes have focused on the upgrade of the structural performance of the new and existing structures. However, in many cases, it is preferable to mitigate the effects of earthquakes by reducing the induced loads in the structures using seismic isolation and response control devices. The limited expertise in the selection and design of the appropriate system for new and existing structures is the main challenge for the extensive use of seismic isolation and response control systems in practice. This document aims to provide a practical guide by presenting a collection of the most commonly used seismic isolation and response control systems and a critical evaluation of the main characteristics of these systems. Comparisons of the key parameters of the design processes for new buildings with seismic isolation are presented, while the application of seismic isolation systems and response control systems for the retrofitting of existing structures is also examined, followed by various case studies from Greece, Japan, Mexico, New Zealand, and Turkey.
Download or read book Seismic Control Systems written by S. Syngellakis and published by WIT Press. This book was released on 2013 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes remain largely unpredictable and potentially catastrophic, a matter of continuous concern to communities in affected zones. Scientists and engineers have made a considerable effort to mitigate their consequences through the design of effective protective devices. New concepts have recently been developed to address the requirements for better structural performance and a more effective use of new materials at a lower cost.This book disseminates knowledge and increases awareness on this very critical subject and thus ultimately contributes to a safer structural design against earthquakes. It comprises a number of articles taken from recent editions of Transactions of the Wessex Institute covering a wide range of topics within the subject of seismic protection through vibration control devices.The first four papers provide a very comprehensive review of existing seismic control designs highlighting their variety, the effectiveness of their performance, as well as the extent of their use for the protection of various types of structures world wide. Most articles deal with anti-seismic devices implementing passive control of structural response through seismic isolation and energy dissipation. Testing and modelling energy-dissipating systems are also extensively covered in the book.It is also important to understand how existing structures fitted with seismic control devices perform against earthquakes. Two such case studies are included in the book; a roof isolated from the top of an existing structure and a bridge supported on both isolating and damping systems. Finally, new analytical approaches for optimising the performance of tuned mass dampers are detailed in two companion papers.
Download or read book Response Control and Seismic Isolation of Buildings written by Masahiko Higashino and published by Taylor & Francis. This book was released on 2006 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This state of the art report from an internationally-based task group (TG44) of CIB presents a highly authoritative guide to the application of innovative technologies on response control and seismic isolation of buildings to practice worldwide.
Download or read book Seismic Isolation Energy Dissipation and Active Vibration Control of Structures written by Bahadir Sadan and published by Springer Nature. This book was released on with total page 787 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Isolation and Response Control for Nuclear and Non nuclear Structures written by International Association for Structural Mechanics in Reactor Technology and published by . This book was released on 1991 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Isolation Energy Dissipation and Active Vibration Control of Structures written by Gian Paolo Cimellaro and published by Springer Nature. This book was released on 2023-01-06 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the proceedings of the 17th World Conference on Seismic Isolation (17WCSI), held in Turin, Italy on September 11-15, 2022. Endorsed by ASSISi Association (Anti-Seismic Systems International Society), the conference discussed state-of-the-art information as well as emerging concepts and innovative applications related to seismic isolation, energy dissipation and active vibration control of structures, resilience and sustainability. The volume covers highly diverse topics, including earthquake-resistant construction, protection from natural and man-made impacts, safety of structures, vulnerability, international standards on structures with seismic isolation, seismic isolation in existing structures and cultural heritage, seismic isolation in high rise buildings, seismic protection of non-structural elements, equipment and statues. The contributions, which are published after a rigorous international peer-review process, highlight numerous exciting ideas that will spur novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Seismic Isolation Structural Health Monitoring and Performance Based Seismic Design in Earthquake Engineering written by Azer A. Kasimzade and published by Springer. This book was released on 2018-08-13 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features chapters based on selected presentations from the International Congress on Advanced Earthquake Resistance of Structures, AERS2016, held in Samsun, Turkey, from 24 to 28 October 2016. It covers the latest advances in three widely popular research areas in Earthquake Engineering: Performance-Based Seismic Design, Seismic Isolation Systems, and Structural Health Monitoring. The book shows the vulnerability of high-rise and seismically isolated buildings to long periods of strong ground motions, and proposes new passive and semi-active structural seismic isolation systems to protect against such effects. These systems are validated through real-time hybrid tests on shaking tables. Structural health monitoring systems provide rapid assessment of structural safety after an earthquake and allow preventive measures to be taken, such as shutting down the elevators and gas lines, before damage occurs. Using the vibration data from instrumented tall buildings, the book demonstrates that large, distant earthquakes and surface waves, which are not accounted for in most attenuation equations, can cause long-duration shaking and damage in tall buildings. The overview of the current performance-based design methodologies includes discussions on the design of tall buildings and the reasons common prescriptive code provisions are not sufficient to address the requirements of tall-building design. In addition, the book explains the modelling and acceptance criteria associated with various performance-based design guidelines, and discusses issues such as selection and scaling of ground motion records, soil-foundation-structure interaction, and seismic instrumentation and peer review needs. The book is of interest to a wide range of professionals in earthquake engineering, including designers, researchers, and graduate students.
Download or read book Design of Seismic Isolated Structures written by Farzad Naeim and published by John Wiley & Sons. This book was released on 1999-03-25 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Um die Auswirkungen von Erdbeben auf Gebäude, Brücken und andere empfindliche Konstruktionen zu mildern, wurden im Laufe der Jahre zahlreiche Technologien entwickelt. Eine der neueren hiervon ist die seismische Isolation: Sie beinhaltet den Einbau von Mechanismen, die das Gebäude von den Bewegungen des Untergrunds entkoppeln. Der Erfolg dieser Technik übertrifft den aller vorher bekannten Verfahren - ein Grund für Ingenieure und Architekten, sich genauer zu informieren. Dazu sei dieses Buch empfohlen. (04/99)
Download or read book An Introduction to Seismic Isolation written by R. Ivan Skinner and published by . This book was released on 1993-07-06 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: These authors present much sought after information on the design procedures for seismically isolated structures. Using a logical progression, they describe seismic isolation along with the concepts of earthquake structural dynamics underlying the isolation theory. Methods discussed will provide the basis for continuing development and refinement.
Download or read book Earthquake Resistant Design with Rubber written by James M. Kelly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base isolation technology offers a cost-effective and reliable strategy for mitigating seismic damage to structures. The effectiveness of this new technology has been demonstrated not only in laboratory research, but also in the actual response of base-isolated buildings during earthquakes. Increasingly, new and existing buildings in earthquake-prone regions throughout the world are making use of this innovative strategy. In this expanded and updated edition, the design methods and guidelines associated with seismic isolation are detailed. The main focus of the book is on isolation systems that use a damped natural rubber. Topics covered include coupled lateral-torsional response, the behavior of multilayer bearings under compression and bending, and the buckling behavior of elastomeric bearings. Also featured is a section covering the recent changes in building code requirements.
Download or read book Development of Adaptive Base Isolation Systems for Seismic Response Control of Structures written by Nat Wongprasert and published by . This book was released on 2001 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Passive and Active Structural Vibration Control in Civil Engineering written by T.T. Soong and published by Springer. This book was released on 2014-05-04 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Base isolation, passive energy dissipation and active control represent three innovative technologies for protection of structures under environmental loads. Increasingly, they are being applied to the design of new structures or to the retrofit of existing structures against wind, earthquakes and other external loads. This book, with contributions from leading researchers from Japan, Europe, and the United States, presents a balanced view of current research and world-wide development in this exciting and fast expanding field. Basic principles as well as practical design and implementational issues associated with the application of base isolation systems and passive and active control devices to civil engineering structures are carefully addressed. Examples of structural applications are presented and extensively discussed.
Download or read book Textbook of Seismic Design written by G. R. Reddy and published by Springer. This book was released on 2019-08-03 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the seismic design of Structures, Piping Systems and Components (SSC). It explains the basic mechanisms of earthquakes, generation of design basis ground motion, and fundamentals of structural dynamics; further, it delves into geotechnical aspects related to the earthquake design, analysis of multi degree-of-freedom systems, and seismic design of RC structures and steel structures. The book discusses the design of components and piping systems located at the ground level as well as at different floor levels of the structure. It also covers anchorage design of component and piping system, and provides an introduction to retrofitting, seismic response control including seismic base isolation, and testing of SSCs. The book is written in an easy-to-understand way, with review questions, case studies and detailed examples on each topic. This educational approach makes the book useful in both classrooms and professional training courses for students, researchers, and professionals alike.
Download or read book Smart Structures written by Franklin Y. Cheng and published by CRC Press. This book was released on 2008-02-25 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative concept, smart structural systems have proven to be extremely effective in absorbing damaging energy and/or counteracting potentially devastating force, thus limiting structural collapse and subsequent injury. As this technology rapidly evolves, there is an ever-increasing need for an authoritative reference that will allow those in t
