Download or read book Seismic Inversion Deconvolution Dual sensor technology written by Enders A. Robinson and published by Pergamon. This book was released on 1999 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The objective of seismic exploration is to delineate the subsurface structure of the earth. A large variety of computer-processing methods are available to transform the observed seismic data into a form that is more useful to the seismic interpreter. An important subdivision of these methods comes under the heading Seismic Inversion and Deconvolution. Most seismic data are recorded either by geophone that measures particle velocity, or else by hydrophone that measures pressure. A dual sensor incorporates both a geophone and a hydrophone so simultaneous measurements of both particle velocity and pressure are obtained. Unprecedented improvements in inversion and deconvolution are made possible through the use of Dual-Sensor Technology.The purpose of Seismic Inversion and Deconvolution, Part B: Dual-Sensor Technology is to provide the fundaments of dual-sensor technology. Previous work together with new results are brought toget
Download or read book Seismic Inversion Deconvolution written by Enders A. Robinson and published by . This book was released on 1984 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Imaging and Deconvolution written by Enders A. Robinson and published by SEG Books. This book was released on 2008 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering ideas and methods while concentrating on fundamentals, this book includes wave motion; digital imaging; digital filtering; visualization aspects of the seismic reflection method; sampling theory; the frequency spectrum; synthetic seismograms; wavelet processing; deconvolution; seismic attributes; phase rotation; and seismic attenuation.
Download or read book Seismic Signatures and Analysis of Reflection Data in Anisotropic Media written by I. Tsvankin and published by Elsevier. This book was released on 2005-06-13 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the breakthrough in the last decade in identifying the key parameters for time and depth imaging in anisotropic media and developing practical methodologies for estimating them from seismic data, Seismic Signatures and Analysis of Reflection Data in Anisotropic Media primarily focuses on the far reaching exploration benefits of anisotropic processing. This volume provides the first comprehensive description of reflection seismic signatures and processing methods in anisotropic media. It identifies the key parameters for time and depth imaging in transversely isotropic media and describes practical methodologies for estimating them from seismic data. Also, it contains a thorough discussion of the important issues of uniqueness and stability of seismic velocity analysis in the presence of anisotropy. The book contains a complete description of anisotropic imaging methods, from the theoretical background to algorithms to implementation issues. Numerous applications to synthetic and field data illustrate the improvements achieved by the anisotropic processing and the possibility of using the estimated anisotropic parameters in lithology discrimination. Focuses on the far reaching exploration benefits of anisotropic processing First comprehensive description of reflection seismic signatures and processing methods in anisotropic media
Download or read book Seismic Amplitude Inversion in Reflection Tomography written by Yanghua Wang and published by Elsevier. This book was released on 2003-02-25 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book of its kind on seismic amplitude inversion in the context of reflection tomography. The aim of the monograph is to advocate the use of ray-amplitude data, separately or jointly with traveltime data, in reflection seismic tomography. The emphasis of seismic exploration is on imaging techniques, so that seismic section can be interpreted directly as a geological section. In contrast it is perhaps ironic that, in decades of industrial seismology, one major aspect of waveform data that potentially is easier to measure and analyse has generally been ignored. That is, the information content of seismic amplitudes. Perhaps the potential complexity has deterred most researchers from a more thorough investigation of the practical use of seismic amplitude data. The author of this volume presents an authoritative and detailed study of amplitude data, as used in conjunction with traveltime data, to provide better constraints on the variation of seismic wave speed in the subsurface. One of the fundamental problems in conventional reflection seismic tomography using only traveltime data is the possible ambiguity between the velocity variation and the reflector depth. The inclusion of amplitude data in the inversion may help to resolve this problem because the amplitudes and traveltimes are sensitive to different features of the subsurface model, and thereby provide more accurate information about the subsurface structure and the velocity distribution. An essential goal of this monograph is to make the amplitude inversion method work with real reflection seismic data.
Download or read book Information Based Inversion and Processing with Applications written by T.J. Ulrych and published by Elsevier. This book was released on 2005-12-16 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Information-Based Inversion and Processing with Applications examines different classical and modern aspects of geophysical data processing and inversion with emphasis on the processing of seismic records in applied seismology. Chapter 1 introduces basic concepts including: probability theory (expectation operator and ensemble statistics), elementary principles of parameter estimation, Fourier and z-transform essentials, and issues of orthogonality. In Chapter 2, the linear treatment of time series is provided. Particular attention is paid to Wold decomposition theorem and time series models (AR, MA, and ARMA) and their connection to seismic data analysis problems. Chapter 3 introduces concepts of Information theory and contains a synopsis of those topics that are used throughout the book. Examples are entropy, conditional entropy, Burg's maximum entropy spectral estimator, and mutual information. Chapter 4 provides a description of inverse problems first from a deterministic point of view, then from a probabilistic one. Chapter 5 deals with methods to improve the signal-to-noise ratio of seismic records. Concepts from previous chapters are put in practice for designing prediction error filters for noise attenuation and high-resolution Radon operators. Chapter 6 deals with the topic of deconvolution and the inversion of acoustic impedance. The first part discusses band-limited extrapolation assuming a known wavelet and considers the issue of wavelet estimation. The second part deals with sparse deconvolution using various 'entropy' type norms. Finally, Chapter 7 introduces recent topics of interest to the authors. The emphasis of this book is on applied seismology but researchers in the area of global seismology, and geophysical signal processing and inversion will find material that is relevant to the ubiquitous problem of estimating complex models from a limited number of noisy observations. Non-conventional approaches to data processing and inversion are presented Important problems in the area of seismic resolution enhancement are discussed Contains research material that could inspire graduate students and their supervisors to undertake new research directions in applied seismology and geophysical signal processing
Download or read book Coding and Decoding Seismic Data written by Luc T. Ikelle and published by Elsevier. This book was released on 2010-03-29 with total page 619 pages. Available in PDF, EPUB and Kindle. Book excerpt: Currently, the acquisition of seismic surveys is performed as a sequential operation in which shots are computed separately, one after the other. This approach is similar to that of multiple-access technology, which is widely used in cellular communications to allow several subscribers to share the same telephone line. The cost of performing various shots simultaneously is almost identical to that of one shot; thus, the savings in time and money expected from using the multishooting approach for computing seismic surveys compared to the current approach are enormous. By using this approach, the long-standing problem of simulating a three-dimensional seismic survey can be reduced to a matter of weeks and not years, as is currently the case. Investigates how to collect, stimulate, and process multishooting data Addresses the improvements in seismic characterization and resolution one can expect from multishooting data Aims to educate the oil and gas exploration and production business of the benefits of multishooting data, and to influence their day-to-day surveying techniques
Download or read book Multi component VSP Analysis for Applied Seismic Anisotropy written by Colin MacBeth and published by Elsevier. This book was released on 2002 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vertical seismic profile, acquired with an array of 3C receivers and either a single source or several arranged in a multi-component configuration, provides an ideal high fidelity calibration tool for seismic projects involved in the application of seismic anisotropy. This book catalogues the majority of specialized tools necessary to work with P-P, P-S and S-S data from such VSP surveys at the acquisition design, processing and interpretation stages. In particular, it discusses 3C, 4C, 6C and 9C VSP, marine and land surveys with near and multiple offsets (walkways), azimuths (walkarounds) or a combination of both. These are considered for TIH or TIV flavours of seismic anisotropy arising from cracks, fractures, sedimentary layering, and shales. The anisotropic adaptation of familiar seismic methods for velocity analysis and inversion, reflected amplitude interpretation, are given together with more multi-component specific algorithms based upon the principles dictated by the vector convolutional model. Thus, multi-component methods are described that provide tests and compensation for source or receiver vector fidelity, tool rotation correction, layer stripping, near-surface correction, wavefield separation, and the Alford rotation with its variants. The work will be of interest to geophysicists involved in research or the application of seismic anisotropy using multi-component seismic.
Download or read book Seismic Interferometry written by Deyan Draganov and published by SEG Books. This book was released on 2008 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including more than 70 papers, this invaluable source for researchers and students contains an editors' introduction with extensive references and chapters on seismic interferometry without equations, highlights of the history of seismic interferometry from 1968 until 2003, and offers a detailed overview of the rapid developments since 2004.
Download or read book Seismic Stratigraphy Basin Analysis and Reservoir Characterisation written by P.C.H. Veeken and published by Elsevier. This book was released on 2006-11-13 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: The interest in seismic stratigraphic techniques to interpret reflection datasets is well established. The advent of sophisticated subsurface reservoir studies and 4D monitoring, for optimising the hydrocarbon production in existing fields, does demonstrate the importance of the 3D seismic methodology. The added value of reflection seismics to the petroleum industry has clearly been proven over the last decades. Seismic profiles and 3D cubes form a vast and robust data source to unravel the structure of the subsurface. It gets nowadays exploited in ever greater detail. Larger offsets and velocity anisotropy effects give for instance access to more details on reservoir flow properties like fracture density, porosity and permeability distribution, Elastic inversion and modelling may tell something about the change in petrophysical parameters. Seismic investigations provide a vital tool for the delineation of subtle hydrocarbon traps. They are the basis for understanding the regional basin framework and the stratigraphic subdivision. Seismic stratigraphy combines two very different scales of observation: the seismic and well-control. The systematic approach applied in seismic stratigraphy explains why many workers are using the principles to evaluate their seismic observations. The here presented modern geophysical techniques allow more accurate prediction of the changes in subsurface geology. Dynamics of sedimentary environments are discussed with its relation to global controling factors and a link is made to high-resolution sequence stratigraphy. ‘Seismic Stratigraphy Basin Analysis and Reservoir Characterisation’ summarizes basic seismic interpretation techniques and demonstrates the benefits of intergrated reservoir studies for hydrocarbon exploration. Topics are presented from a practical point of view and are supported by well-illustrated case histories. The reader (student as well as professional geophysicists, geologists and reservoir engineers) is taken from a basic level to more advanced study techniques. * Overview reflection seismic methods and its limitations.* Link between basic seismic stratigraphic principles and high resolution sequence stratigraphy.* Description of various techniques for seismic reservoir characterization and synthetic modelling.* Overview nversion techniques, AVO and seismic attributes analysis.
Download or read book Basic Theory in Reflection Seismology written by J.K. Costain and published by Elsevier. This book was released on 2004-10-27 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: The material in this volume provides the basic theory necessary to understand the principles behind imaging the subsurface of the Earth using reflection and refraction seismology. For reflection seismology, the end product is a "record section" from a collection of "wiggly traces" that are recorded in the field from which information about the properties of subsurface structure and rock can be derived. For the most part, the principles of imaging are the same regardless of the depth to the target; the same mathematical background is necessary for targeting a shallow water table as for investigating the base of the earth's continental "crust" at a depth of 30-50 km.
Download or read book Computational Neural Networks for Geophysical Data Processing written by M.M. Poulton and published by Elsevier. This book was released on 2001-06-13 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was primarily written for an audience that has heard about neural networks or has had some experience with the algorithms, but would like to gain a deeper understanding of the fundamental material. For those that already have a solid grasp of how to create a neural network application, this work can provide a wide range of examples of nuances in network design, data set design, testing strategy, and error analysis. Computational, rather than artificial, modifiers are used for neural networks in this book to make a distinction between networks that are implemented in hardware and those that are implemented in software. The term artificial neural network covers any implementation that is inorganic and is the most general term. Computational neural networks are only implemented in software but represent the vast majority of applications. While this book cannot provide a blue print for every conceivable geophysics application, it does outline a basic approach that has been used successfully.
Download or read book Fractal Models in Exploration Geophysics written by V.P. Dimri and published by Elsevier. This book was released on 2012-10-22 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Researchers in the field of exploration geophysics have developed new methods for the acquisition, processing and interpretation of gravity and magnetic data, based on detailed investigations of bore wells around the globe. Fractal Models in Exploration Geophysics describes fractal-based models for characterizing these complex subsurface geological structures. The authors introduce the inverse problem using a fractal approach which they then develop with the implementation of a global optimization algorithm for seismic data: very fast simulated annealing (VFSA). This approach provides high-resolution inverse modeling results—particularly useful for reservoir characterization. Serves as a valuable resource for researchers studying the application of fractals in exploration, and for practitioners directly applying field data for geo-modeling Discusses the basic principles and practical applications of time-lapse seismic reservoir monitoring technology - application rapidly advancing topic Provides the fundamentals for those interested in reservoir geophysics and reservoir simulation study Demonstrates an example of reservoir simulation for enhanced oil recovery using CO2 injection
Download or read book Basic Geophysics written by Enders A. Robinson and published by SEG Books. This book was released on 2017-09-01 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a thorough comprehension of the field of geophysics, we need to understand its origins. Basic Geophysics by Enders Robinson and Dean Clark takes us on a journey that demonstrates how the achievements of our predecessors have paved the way for our modern science. From the ancient Greeks through the Enlightenment to the greats of the contemporary age, the reasoning behind basic principles is explored and clarified. With that foundation, several advanced topics are examined, including: the 3D wave equation; ray tracing and seismic modeling; reflection, refraction, and diffraction; and WKBJ migration. The successful integration of the historical narrative alongside practical analysis of relevant principles makes this book an excellent resource for both novices and professionals, and all readers will gain insight and appreciation for the seismic theory that underlies modern exploration seismology.
Download or read book Practical Wavelet Deconvolution and Seismic Inversion written by C. R. T. Ramsden and published by . This book was released on 1987 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic While Drilling written by F.B Poletto and published by Elsevier. This book was released on 2004-06-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give a theoretical and practical introduction to seismic-while-drilling by using the drill-bit noise. This recent technology offers important products for geophysical control of drilling. It involves aspects typical of borehole seismics and of the drilling control surveying, hitherto the sole domain of mudlogging. For aspects related to the drill-bit source performance and borehole acoustics, the book attempts to provide a connection between experts working in geophysics and in drilling. There are different ways of thinking related to basic knowledge, operational procedures and precision in the observation of the physical quantities. The goal of the book is to help "build a bridge" between geophysicists involved in seismic while drilling - who may need to familiarize themselves with methods and procedures of drilling and drilling-rock mechanics - and drillers involved in geosteering and drilling of "smart wells" - who may have to familiarize themselves with seismic signals, wave resolution and radiation. For instance, an argument of common interest for drilling and seismic while drilling studies is the monitoring of the drill-string and bit vibrations. This volume contains a large number of real examples of SWD data analysis and applications.
Download or read book Seismic Waves and Rays in Elastic Media written by Michael A. Slawinski and published by Elsevier. This book was released on 2003 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to explore seismic phenomena in elastic media and emphasizes the interdependence of mathematical formulation and physical meaning. The purpose of this title - which is intended for senior undergraduate and graduate students as well as scientists interested in quantitative seismology - is to use aspects of continuum mechanics, wave theory and ray theory to describe phenomena resulting from the propagation of waves. The book is divided into three parts: Elastic continua, Waves and rays, and Variational formulation of rays. In Part I, continuum mechanics are used to describe the material through which seismic waves propagate, and to formulate a system of equations to study the behaviour of such material. In Part II, these equations are used to identify the types of body waves propagating in elastic continua as well as to express their velocities and displacements in terms of the properties of these continua. To solve the equations of motion in anisotropic inhomogeneous continua, the high-frequency approximation is used and establishes the concept of a ray. In Part III, it is shown that in elastic continua a ray is tantamount to a trajectory along which a seismic signal propagates in accordance with the variational principle of stationary travel time.
