Download or read book Seismic Behavior and Smooth Hysteretic Modeling of Lightly Reinforced Concrete Joints written by Hatem Ahmed Adel AlShaikh and published by . This book was released on 1996 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimental Investigation of the Behavior of Lightly reinforced Concrete Column and Beam column Joint Details Subjected to Seismic Loading written by Stephen Paul Pessiki and published by . This book was released on 1990 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NEHRP Commentary on the Gidelines for the Seismic Rehabilitation of Buildings written by Eugene Zeller and published by DIANE Publishing. This book was released on 2000-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document from the National Earthquake Hazards Reduction Program (NEHRP) was prepared for the Building Seismic Safety Council (BSSC) with funding from the Federal Emergency Management Agency (FEMA). It provides commentary on the NEHRP Guidelines for the Seismic Rehabilitation of Buildings. It contains systematic guidance enabling design professionals to formulate effective & reliable rehabilitation approaches that will limit the expected earthquake damage to a specified range for a specified level of ground shaking. This kind of guidance applicable to all types of existing buildings & in all parts of the country has never existed before. Illustrated.
Download or read book Seismic Design of Reinforced Concrete and Masonry Buildings written by Thomas Paulay and published by Wiley-Interscience. This book was released on 1992-04-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: Emphasizes actual structural design, not analysis, of multistory buildings for seismic resistance. Strong emphasis is placed on specific detailing requirements for construction. Fundamental design principles are presented to create buildings that respond to a wide range of potential seismic forces, which are illustrated by numerous detailed examples. The discussion includes the design of reinforced concrete ductile frames, structural walls, dual systems, reinforced masonry structures, buildings with restricted ductility and foundation walls. In addition to the examples, full design calculations are given for three prototype structures.
Download or read book Modelling and Analysis of Reinforced Concrete Structures for Dynamic Loading written by Christian Meyer and published by Springer. This book was released on 2014-05-04 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive review of the material behavior of concrete under dynamic loads, especially impact and impuls, opens the volume. It is followed by a summary of the various analytical tools available to engineers interested in analyzing the nonlinear behavior of reinforced concrete members for dynamic load. These range from relatively simple and practice-oriented push-over analysis to sophisticated layered finite element models. Important design-related topics are discussed, with special emphasis on performance of concrete frames subjected to seismic loads. The significance of modern software systems is recognized by including extensive examples. For readers not current in dynamic analysis methods, an appendix contains a review of the mathematical methods most commonly used for such analysis.
Download or read book PRO 6 3rd International RILEM Workshop on High Performance Fiber Reinforced Cement Composites HPFRCC 3 written by Hans Wolfgang Reinhardt and published by RILEM Publications. This book was released on 1999 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydro Environmental Analysis written by James L. Martin and published by CRC Press. This book was released on 2013-12-04 with total page 5742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on fundamental principles, Hydro-Environmental Analysis: Freshwater Environments presents in-depth information about freshwater environments and how they are influenced by regulation. It provides a holistic approach, exploring the factors that impact water quality and quantity, and the regulations, policy and management methods that are necessary to maintain this vital resource. It offers a historical viewpoint as well as an overview and foundation of the physical, chemical, and biological characteristics affecting the management of freshwater environments. The book concentrates on broad and general concepts, providing an interdisciplinary foundation. The author covers the methods of measurement and classification; chemical, physical, and biological characteristics; indicators of ecological health; and management and restoration. He also considers common indicators of environmental health; characteristics and operations of regulatory control structures; applicable laws and regulations; and restoration methods. The text delves into rivers and streams in the first half and lakes and reservoirs in the second half. Each section centers on the characteristics of those systems and methods of classification, and then moves on to discuss the physical, chemical, and biological characteristics of each. In the section on lakes and reservoirs, it examines the characteristics and operations of regulatory structures, and presents the methods commonly used to assess the environmental health or integrity of these water bodies. It also introduces considerations for restoration, and presents two unique aquatic environments: wetlands and reservoir tailwaters. Written from an engineering perspective, the book is an ideal introduction to the aquatic and limnological sciences for students of environmental science, as well as students of environmental engineering. It also serves as a reference for engineers and scientists involved in the management, regulation, or restoration of freshwater environments.
Download or read book Safety Reliability Risk and Life Cycle Performance of Structures and Infrastructures written by George Deodatis and published by CRC Press. This book was released on 2014-02-10 with total page 1112 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures contains the plenary lectures and papers presented at the 11th International Conference on STRUCTURAL SAFETY AND RELIABILITY (ICOSSAR2013, New York, NY, USA, 16-20 June 2013), and covers major aspects of safety, reliability, risk and life-cycle performance of str
Download or read book Seismic Evaluation and Strengthening of Lightly Reinforced Concrete Structures written by Sami El-Borgi and published by . This book was released on 1993 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings written by and published by . This book was released on 1995 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Earthquake Engineer 10th World written by and published by Taylor & Francis US. This book was released on 1992-01-01 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Research Accomplishments 1986 1994 written by National Center for Earthquake Engineering Research (U.S.) and published by . This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Design of Reinforced Concrete Buildings written by Jack Moehle and published by McGraw Hill Professional. This book was released on 2014-10-06 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete coverage of earthquake-resistant concrete building design Written by a renowned seismic engineering expert, this authoritative resource discusses the theory and practice for the design and evaluation of earthquakeresisting reinforced concrete buildings. The book addresses the behavior of reinforced concrete materials, components, and systems subjected to routine and extreme loads, with an emphasis on response to earthquake loading. Design methods, both at a basic level as required by current building codes and at an advanced level needed for special problems such as seismic performance assessment, are described. Data and models useful for analyzing reinforced concrete structures as well as numerous illustrations, tables, and equations are included in this detailed reference. Seismic Design of Reinforced Concrete Buildings covers: Seismic design and performance verification Steel reinforcement Concrete Confined concrete Axially loaded members Moment and axial force Shear in beams, columns, and walls Development and anchorage Beam-column connections Slab-column and slab-wall connections Seismic design overview Special moment frames Special structural walls Gravity framing Diaphragms and collectors Foundations
Download or read book Repair Rejuvenation and Enhancement of Concrete written by Ravindra K. Dhir and published by Thomas Telford. This book was released on 2002 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete is a global material that underwrites commercial wellbeing and social development. There is no substitute that can be used on the same engineering scale and its sustainability, expolitation and further development are imperatives to creating and maintaing a healthy economy and environment worldwide. The pressure for change and improvement of performance is relentless and necessary. Concrete must keep evolving to satisfy the increasing demands of all its users.
Download or read book Proceedings of the Eleventh European Conference on Earthquake Engineering written by Alain Pecker and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Strengthening of Concrete Buildings Using FRP Composites written by and published by American Concrete Institute. This book was released on 2008 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This CD-ROM consists of eight papers that were presented by ACI Committee 440 at the Spring Convention in Atlanta, GA, in April 2007"--Site Web de l'éditeur
Download or read book Building and Fire Research Laboratory Publications written by Building and Fire Research Laboratory (U.S.) and published by . This book was released on 1992 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
