Download or read book Securing Your SCADA and Industrial Control Systems written by Defense Dept., Technical Support Working Group (TSWG) and published by Government Printing Office. This book was released on with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Version 1.0. This guidebook provides information for enhancing the security of Supervisory Control and Data Acquisition Systems (SCADA) and Industrial Control Systems (ICS). The information is a comprehensive overview of industrial control system security, including administrative controls, architecture design, and security technology. This is a guide for enhancing security, not a how-to manual for building an ICS, and its purpose is to teach ICS managers, administrators, operators, engineers, and other ICS staff what security concerns they should be taking into account. Other related products: National Response Framework, 2008 is available here: https://bookstore.gpo.gov/products/sku/064-000-00044-6 National Strategy for Homeland Security (October 2007) is available here: https://bookstore.gpo.gov/products/sku/041-001-00657-5 New Era of Responsibility: Renewing America's Promise can be found here: https://bookstore.gpo.gov/products/sku/041-001-00660-5

Download or read book Protecting Industrial Control Systems from Electronic Threats written by Joseph Weiss and published by Momentum Press. This book was released on 2010 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at both the novice and expert in IT security and industrial control systems (ICS), this book will help readers gain a better understanding of protecting ICSs from electronic threats. Cyber security is getting much more attention and "SCADA security" (Supervisory Control and Data Acquisition) is a particularly important part of this field, as are Distributed Control Systems (DCS), Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), Intelligent Electronic Devices (IEDs), and all the other, field controllers, sensors, drives, and emission controls that make up the "intelligence" of modern industrial buildings and facilities. Some Key Features include: How to better understand the convergence between Industrial Control Systems (ICS) and general IT systems Insight into educational needs and certifications How to conduct Risk and Vulnerability Assessments Descriptions and observations from malicious and unintentional ICS cyber incidents Recommendations for securing ICS

Download or read book Cybersecurity for Industrial Control Systems written by Tyson Macaulay and published by CRC Press. This book was released on 2016-04-19 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: As industrial control systems (ICS), including SCADA, DCS, and other process control networks, become Internet-facing, they expose crucial services to attack. Threats like Duqu, a sophisticated worm found in the wild that appeared to share portions of its code with the Stuxnet worm, emerge with increasing frequency. Explaining how to develop and im

Download or read book Industrial Network Security written by Eric D. Knapp and published by Syngress. This book was released on 2014-12-09 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the sophistication of cyber-attacks increases, understanding how to defend critical infrastructure systems—energy production, water, gas, and other vital systems—becomes more important, and heavily mandated. Industrial Network Security, Second Edition arms you with the knowledge you need to understand the vulnerabilities of these distributed supervisory and control systems. The book examines the unique protocols and applications that are the foundation of industrial control systems, and provides clear guidelines for their protection. This how-to guide gives you thorough understanding of the unique challenges facing critical infrastructures, new guidelines and security measures for critical infrastructure protection, knowledge of new and evolving security tools, and pointers on SCADA protocols and security implementation. All-new real-world examples of attacks against control systems, and more diagrams of systems Expanded coverage of protocols such as 61850, Ethernet/IP, CIP, ISA-99, and the evolution to IEC62443 Expanded coverage of Smart Grid security New coverage of signature-based detection, exploit-based vs. vulnerability-based detection, and signature reverse engineering

Download or read book Handbook of SCADA Control Systems Security written by Robert Radvanovsky and published by CRC Press. This book was released on 2013-02-19 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The availability and security of many services we rely upon including water treatment, electricity, healthcare, transportation, and financial transactions are routinely put at risk by cyber threats. The Handbook of SCADA/Control Systems Security is a fundamental outline of security concepts, methodologies, and relevant information pertaining to the

Download or read book Guide to Industrial Control Systems ICS Security written by Keith Stouffer and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hacking Exposed Industrial Control Systems ICS and SCADA Security Secrets Solutions written by Clint Bodungen and published by McGraw Hill Professional. This book was released on 2016-09-22 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn to defend crucial ICS/SCADA infrastructure from devastating attacks the tried-and-true Hacking Exposed way This practical guide reveals the powerful weapons and devious methods cyber-terrorists use to compromise the devices, applications, and systems vital to oil and gas pipelines, electrical grids, and nuclear refineries. Written in the battle-tested Hacking Exposed style, the book arms you with the skills and tools necessary to defend against attacks that are debilitating—and potentially deadly. Hacking Exposed Industrial Control Systems: ICS and SCADA Security Secrets & Solutions explains vulnerabilities and attack vectors specific to ICS/SCADA protocols, applications, hardware, servers, and workstations. You will learn how hackers and malware, such as the infamous Stuxnet worm, can exploit them and disrupt critical processes, compromise safety, and bring production to a halt. The authors fully explain defense strategies and offer ready-to-deploy countermeasures. Each chapter features a real-world case study as well as notes, tips, and cautions. Features examples, code samples, and screenshots of ICS/SCADA-specific attacks Offers step-by-step vulnerability assessment and penetration test instruction Written by a team of ICS/SCADA security experts and edited by Hacking Exposed veteran Joel Scambray

Download or read book Industrial Control Systems Security and Resiliency written by Craig Rieger and published by Springer Nature. This book was released on 2019-08-29 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the key concerns as well as research challenges in designing secure and resilient Industrial Control Systems (ICS). It will discuss today's state of the art security architectures and couple it with near and long term research needs that compare to the baseline. It will also establish all discussions to generic reference architecture for ICS that reflects and protects high consequence scenarios. Significant strides have been made in making industrial control systems secure. However, increasing connectivity of ICS systems with commodity IT devices and significant human interaction of ICS systems during its operation regularly introduces newer threats to these systems resulting in ICS security defenses always playing catch-up. There is an emerging consensus that it is very important for ICS missions to survive cyber-attacks as well as failures and continue to maintain a certain level and quality of service. Such resilient ICS design requires one to be proactive in understanding and reasoning about evolving threats to ICS components, their potential effects on the ICS mission’s survivability goals, and identify ways to design secure resilient ICS systems. This book targets primarily educators and researchers working in the area of ICS and Supervisory Control And Data Acquisition (SCADA) systems security and resiliency. Practitioners responsible for security deployment, management and governance in ICS and SCADA systems would also find this book useful. Graduate students will find this book to be a good starting point for research in this area and a reference source.

Download or read book Pentesting Industrial Control Systems written by Paul Smith and published by Packt Publishing Ltd. This book was released on 2021-12-09 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to defend your ICS in practice, from lab setup and intel gathering to working with SCADA Key FeaturesBecome well-versed with offensive ways of defending your industrial control systemsLearn about industrial network protocols, threat hunting, Active Directory compromises, SQL injection, and much moreBuild offensive and defensive skills to combat industrial cyber threatsBook Description The industrial cybersecurity domain has grown significantly in recent years. To completely secure critical infrastructure, red teams must be employed to continuously test and exploit the security integrity of a company's people, processes, and products. This is a unique pentesting book, which takes a different approach by helping you gain hands-on experience with equipment that you'll come across in the field. This will enable you to understand how industrial equipment interacts and operates within an operational environment. You'll start by getting to grips with the basics of industrial processes, and then see how to create and break the process, along with gathering open-source intel to create a threat landscape for your potential customer. As you advance, you'll find out how to install and utilize offensive techniques used by professional hackers. Throughout the book, you'll explore industrial equipment, port and service discovery, pivoting, and much more, before finally launching attacks against systems in an industrial network. By the end of this penetration testing book, you'll not only understand how to analyze and navigate the intricacies of an industrial control system (ICS), but you'll also have developed essential offensive and defensive skills to proactively protect industrial networks from modern cyberattacks. What you will learnSet up a starter-kit ICS lab with both physical and virtual equipmentPerform open source intel-gathering pre-engagement to help map your attack landscapeGet to grips with the Standard Operating Procedures (SOPs) for penetration testing on industrial equipmentUnderstand the principles of traffic spanning and the importance of listening to customer networksGain fundamental knowledge of ICS communicationConnect physical operational technology to engineering workstations and supervisory control and data acquisition (SCADA) softwareGet hands-on with directory scanning tools to map web-based SCADA solutionsWho this book is for If you are an ethical hacker, penetration tester, automation engineer, or IT security professional looking to maintain and secure industrial networks from adversaries, this book is for you. A basic understanding of cybersecurity and recent cyber events will help you get the most out of this book.

Download or read book Industrial Network Security written by Eric D. Knapp and published by Elsevier. This book was released on 2011-09-28 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Network Security: Securing Critical Infrastructure Networks for Smart Grid, SCADA, and Other Industrial Control Systems describes an approach to ensure the security of industrial networks by taking into account the unique network, protocol, and application characteristics of an industrial control system, along with various compliance controls. It offers guidance on deployment and configuration, and it explains why, where, and how security controls should be implemented. Divided into 11 chapters, the book explains the basics of Ethernet and Transmission Control Protocol/Internet Protocol (TCP/IP) networking communications and the SCADA and field bus protocols. It also discusses industrial networks as they relate to “critical infrastructure and cyber security, potential risks and consequences of a cyber attack against an industrial control system, compliance controls in relation to network security practices, industrial network protocols, such as Modbus and DNP3, assessment of vulnerabilities and risk, how to secure enclaves, regulatory compliance standards applicable to industrial network security, and common pitfalls and mistakes, like complacency and deployment errors. This book is a valuable resource for plant operators and information security analysts, as well as compliance officers who want to pass an audit with minimal penalties and/or fines. Covers implementation guidelines for security measures of critical infrastructure Applies the security measures for system-specific compliance Discusses common pitfalls and mistakes and how to avoid them

Download or read book Industrial Cybersecurity written by Pascal Ackerman and published by Packt Publishing Ltd. This book was released on 2017-10-18 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Your one-step guide to understanding industrial cyber security, its control systems, and its operations. About This Book Learn about endpoint protection such as anti-malware implementation, updating, monitoring, and sanitizing user workloads and mobile devices Filled with practical examples to help you secure critical infrastructure systems efficiently A step-by-step guide that will teach you the techniques and methodologies of building robust infrastructure systems Who This Book Is For If you are a security professional and want to ensure a robust environment for critical infrastructure systems, this book is for you. IT professionals interested in getting into the cyber security domain or who are looking at gaining industrial cyber security certifications will also find this book useful. What You Will Learn Understand industrial cybersecurity, its control systems and operations Design security-oriented architectures, network segmentation, and security support services Configure event monitoring systems, anti-malware applications, and endpoint security Gain knowledge of ICS risks, threat detection, and access management Learn about patch management and life cycle management Secure your industrial control systems from design through retirement In Detail With industries expanding, cyber attacks have increased significantly. Understanding your control system's vulnerabilities and learning techniques to defend critical infrastructure systems from cyber threats is increasingly important. With the help of real-world use cases, this book will teach you the methodologies and security measures necessary to protect critical infrastructure systems and will get you up to speed with identifying unique challenges.Industrial cybersecurity begins by introducing Industrial Control System (ICS) technology, including ICS architectures, communication media, and protocols. This is followed by a presentation on ICS (in) security. After presenting an ICS-related attack scenario, securing of the ICS is discussed, including topics such as network segmentation, defense-in-depth strategies, and protective solutions. Along with practical examples for protecting industrial control systems, this book details security assessments, risk management, and security program development. It also covers essential cybersecurity aspects, such as threat detection and access management. Topics related to endpoint hardening such as monitoring, updating, and anti-malware implementations are also discussed. Style and approach A step-by-step guide to implement Industrial Cyber Security effectively.

Download or read book Security and Privacy Trends in the Industrial Internet of Things written by Cristina Alcaraz and published by Springer. This book was released on 2019-05-13 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by leaders in the protection field of critical infrastructures, provides an extended overview of the technological and operative advantages together with the security problems and challenges of the new paradigm of the Internet of Things in today’s industry, also known as the Industry Internet of Things (IIoT). The incorporation of the new embedded technologies and the interconnected networking advances in the automation and monitoring processes, certainly multiplies the functional complexities of the underlying control system, whilst increasing security and privacy risks. The critical nature of the application context and its relevance for the well-being of citizens and their economy, attracts the attention of multiple, advanced attackers, with stealthy abilities to evade security policies, ex-filter information or exploit vulnerabilities. Some real-life events and registers in CERTs have already clearly demonstrated how the control industry can become vulnerable to multiple types of advanced threats whose focus consists in hitting the safety and security of the control processes. This book, therefore, comprises a detailed spectrum of research papers with highly analytical content and actuation procedures to cover the relevant security and privacy issues such as data protection, awareness, response and resilience, all of them working at optimal times. Readers will be able to comprehend the construction problems of the fourth industrial revolution and are introduced to effective, lightweight protection solutions which can be integrated as part of the new IIoT-based monitoring ecosystem.

Download or read book Cyber Security for Industrial Control Systems written by Peng Cheng and published by CRC Press. This book was released on 2016-03-23 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber Security for Industrial Control Systems: From the Viewpoint of Close-Loop provides a comprehensive technical guide on up-to-date new secure defending theories and technologies, novel design, and systematic understanding of secure architecture with practical applications. The book consists of 10 chapters, which are divided into three parts. The first three chapters extensively introduce secure state estimation technologies, providing a systematic presentation on the latest progress in security issues regarding state estimation. The next five chapters focus on the design of secure feedback control technologies in industrial control systems, displaying an extraordinary difference from that of traditional secure defending approaches from the viewpoint of network and communication. The last two chapters elaborate on the systematic secure control architecture and algorithms for various concrete application scenarios. The authors provide detailed descriptions on attack model and strategy analysis, intrusion detection, secure state estimation and control, game theory in closed-loop systems, and various cyber security applications. The book is useful to anyone interested in secure theories and technologies for industrial control systems.

Download or read book SCADA Security What s broken and how to fix it written by Andrew Ginter and published by Lulu.com. This book was released on 2019-03 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern attacks routinely breach SCADA networks that are defended to IT standards. This is unacceptable. Defense in depth has failed us. In ""SCADA Security"" Ginter describes this failure and describes an alternative. Strong SCADA security is possible, practical, and cheaper than failed, IT-centric, defense-in-depth. While nothing can be completely secure, we decide how high to set the bar for our attackers. For important SCADA systems, effective attacks should always be ruinously expensive and difficult. We can and should defend our SCADA systems so thoroughly that even our most resourceful enemies tear their hair out and curse the names of our SCADA systems' designers.

Download or read book Hacking Exposed Industrial Control Systems ICS and SCADA Security Secrets Solutions written by Clint Bodungen and published by McGraw-Hill Education. This book was released on 2016-09-13 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. Secure your ICS and SCADA systems the battle-tested Hacking ExposedTM way This hands-on guide exposes the devious methods cyber threat actors use to compromise the hardware and software central to petroleum pipelines, electrical grids, and nuclear refineries. Hacking Exposed Industrial Control Systems: ICS and SCADA Security Secrets and Solutions shows, step-by-step, how to implement and maintain an ICS-focused risk mitigation framework that is targeted, efficient, and cost-effective. The book arms you with the skills necessary to defend against attacks that are debilitating―and potentially deadly. See how to assess risk, perform ICS-specific threat modeling, carry out penetration tests using “ICS safe” methods, and block malware. Throughout, the authors use case studies of notorious attacks to illustrate vulnerabilities alongside actionable, ready-to-deploy countermeasures. Learn how to: • Assess your exposure and develop an effective risk management plan • Adopt the latest ICS-focused threat intelligence techniques • Use threat modeling to create realistic risk scenarios • Implement a customized, low-impact ICS penetration-testing strategy • See how attackers exploit industrial protocols • Analyze and fortify ICS and SCADA devices and applications • Discover and eliminate undisclosed “zero-day” vulnerabilities • Detect, block, and analyze malware of all varieties

Download or read book Securing SCADA Systems written by Ronald L. Krutz and published by John Wiley & Sons. This book was released on 2005-11-07 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bestselling author Ron Krutz once again demonstrates his ability to make difficult security topics approachable with this first in-depth look at SCADA (Supervisory Control And Data Acquisition) systems Krutz discusses the harsh reality that natural gas pipelines, nuclear plants, water systems, oil refineries, and other industrial facilities are vulnerable to a terrorist or disgruntled employee causing lethal accidents and millions of dollars of damage-and what can be done to prevent this from happening Examines SCADA system threats and vulnerabilities, the emergence of protocol standards, and how security controls can be applied to ensure the safety and security of our national infrastructure assets

Download or read book Securing SCADA Systems written by Ronald L. Krutz and published by John Wiley & Sons. This book was released on 2015-06-10 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bestselling author Ron Krutz once again demonstrates his ability to make difficult security topics approachable with this first in-depth look at SCADA (Supervisory Control And Data Acquisition) systems Krutz discusses the harsh reality that natural gas pipelines, nuclear plants, water systems, oil refineries, and other industrial facilities are vulnerable to a terrorist or disgruntled employee causing lethal accidents and millions of dollars of damage-and what can be done to prevent this from happening Examines SCADA system threats and vulnerabilities, the emergence of protocol standards, and how security controls can be applied to ensure the safety and security of our national infrastructure assets