Download or read book Screw Theory and Its Application to Spatial Robot Manipulators written by Carl D. Crane, III and published by Cambridge University Press. This book was released on 2022-08-31 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover a fresh take on classical screw theory and understand the geometry embedded within robots and mechanisms with this essential text. The book begins with a geometrical study of points, lines, and planes and slowly takes the reader toward a mastery of screw theory with some cutting-edge results, all while using only basic linear algebra and ordinary vectors. It features a discussion of the geometry of parallel and serial robot manipulators, in addition to the reciprocity of screws and a singularity study. All 41 essential screw systems are unveiled, establishing the possible freedom twists and constraint wrenches for a kinematic joint. Familiarizing the reader with screw geometry in order to study the statics and kinematics of robots and mechanisms, this is a perfect resource for engineers and graduate students.
Download or read book Screw Theory in Robotics written by Jose Pardos-Gotor and published by CRC Press. This book was released on 2021-11-23 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw theory is an effective and efficient method used in robotics applications. This book demonstrates how to implement screw theory, explaining the key fundamentals and real-world applications using a practical and visual approach. An essential tool for those involved in the development of robotics implementations, the book uses case studies to analyze mechatronics. Screw theory offers a significant opportunity to interpret mechanics at a high level, facilitating contemporary geometric techniques in solving common robotics issues. Using these solutions results in an optimized performance in comparison to algebraic and numerical options. Demonstrating techniques such as six-dimensional (6D) vector notation and the Product of Exponentials (POE), the use of screw theory notation reduces the need for complex algebra, which results in simpler code, which is easier to write, comprehend, and debug. The book provides exercises and simulations to demonstrate this with new formulas and algorithms presented to aid the reader in accelerating their learning. By walking the user through the fundamentals of screw theory, and by providing a complete set of examples for the most common robot manipulator architecture, the book delivers an excellent foundation through which to comprehend screw theory developments. The visual approach of the book means it can be used as a self-learning tool for professionals alongside students. It will be of interest to those studying robotics, mechanics, mechanical engineering, and electrical engineering.
Download or read book Screw Theory and Its Application to Spatial Robot Manipulators written by and published by Cambridge University Press. This book was released on with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robots and Screw Theory written by Joseph K. Davidson and published by Oxford University Press on Demand. This book was released on 2004 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the mathematical foundations, especially geometric, underlying the motions and force-transfers in robots. The principles developed can be applied to both control of robots and the design of their major moving parts. Comprehensive coverage of the screw and its geometry bridges the gap between screw theory and traditional mechanics but no prior knowledge of screw theory is assumed. The reader is introduced to the screw with a simple planar example and progresses to robots that move three-dimensionally. Containing many illustrative examples, over 300 exercises, and a chapter list of references it is ideal for graduate students, researchers and professionals in the field of robotics, robot design and development.
Download or read book Screw Theory in Robotics written by JOSE M. PARDOS-GOTOR and published by CRC Press. This book was released on 2021-11-24 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Screw theory is an effective and efficient method used in robotics applications. This book demonstrates how to implement screw theory, explaining the key fundamentals and real-world applications using a practical and visual approach. An essential tool for those involved in the development of robotics implementations, the book uses case studies to analyze mechatronics. Screw theory offers a significant opportunity to interpret mechanics at a high level, facilitating contemporary geometric techniques in solving common robotics issues. Using these solutions results in an optimized performance in comparison to algebraic and numerical options. Demonstrating techniques such as six-dimensional (6D) vector notation and the Product of Exponentials (POE), the use of screw theory notation reduces the need for complex algebra, which results in simpler code, which is easier to write, comprehend, and debug. The book provides exercises and simulations to demonstrate this with new formulas and algorithms presented to aid the reader in accelerating their learning. By walking the user through the fundamentals of screw theory, and by providing a complete set of examples for the most common robot manipulator architecture, the book delivers an excellent foundation through which to comprehend screw theory developments. The visual approach of the book means it can be used as a self-learning tool for professionals alongside students. It will be of interest to those studying robotics, mechanics, mechanical engineering, and electrical engineering.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Kinematic Analysis of Parallel Manipulators by Algebraic Screw Theory written by Jaime Gallardo-Alvarado and published by Springer. This book was released on 2016-06-16 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the fundamentals of screw theory concerned with velocity analysis of rigid-bodies, confirmed with detailed and explicit proofs. The author additionally investigates acceleration, jerk, and hyper-jerk analyses of rigid-bodies following the trend of the velocity analysis. With the material provided in this book, readers can extend the theory of screws into the kinematics of optional order of rigid-bodies. Illustrative examples and exercises to reinforce learning are provided. Of particular note, the kinematics of emblematic parallel manipulators, such as the Delta robot as well as the original Gough and Stewart platforms are revisited applying, in addition to the theory of screws, new methods devoted to simplify the corresponding forward-displacement analysis, a challenging task for most parallel manipulators.
Download or read book Kinematic Analysis of Robot Manipulators written by Carl D. Crane, III and published by Cambridge University Press. This book was released on 2008-01-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to robot manipulators, with case studies of industrial robots.
Download or read book Finite and Instantaneous Screw Theory in Robotic Mechanism written by Tao Sun and published by Springer Nature. This book was released on 2020-02-13 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a finite and instantaneous screw theory for the development of robotic mechanisms. It addresses the analytical description and algebraic computation of finite motion, resulting in a generalized type synthesis approach. It then discusses the direct connection between topology and performance models, leading to an integrated performance analysis and design framework. The book then explores parameter uncertainty and multiple performance requirements for reliable, optimal design methods, and describes the error accumulation principle and parameter identification algorithm, to increase robot accuracy. It proposes a unified and generic methodology, and appliesto the invention, analysis, design, and calibration of robotic mechanisms. The book is intended for researchers, graduate students and engineers in the fields of robotic mechanism and robot design and applications./div
Download or read book Mechanisms written by Jaime Gallardo-Alvarado and published by Academic Press. This book was released on 2022-06-18 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Theory of mechanisms is an applied science of mechanics that studies the relationship between geometry, mobility, topology, and relative motion between rigid bodies connected by geometric forms. Recently, knowledge in kinematics and mechanisms has considerably increased, causing a renovation in the methods of kinematic analysis. With the progress of the algebras of kinematics and the mathematical methods used in the optimal solution of polynomial equations, it has become possible to formulate and elegantly solve problems. Mechanisms: Kinematic Analysis and Applications in Robotics provides an updated approach to kinematic analysis methods and a review of the mobility criteria most used in planar and spatial mechanisms. Applications in the kinematic analysis of robot manipulators complement the material presented in the book, growing in importance when one recognizes that kinematics is a basic area in the control and modeling of robot manipulators. Presents an organized review of general mathematical methods and classical concepts of the theory of mechanisms Introduces methods approaching time derivatives of arbitrary vectors employing general approaches based on the vector angular velocity concept introduced by Kane and Levinson Proposes a strategic approach not only in acceleration analysis but also to jerk analysis in an easy to understand and systematic way Explains kinematic analysis of serial and parallel manipulators by means of the theory of screws
Download or read book Robots and Screw Theory written by J. K. Davidson and published by . This book was released on 2023 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work describes the mathematical foundations, especially geometric, underlying the motions and force-transfers in robots. The principles developed can be applied to both control of robots and the design of their major moving parts.
Download or read book New Advances in Mechanisms Transmissions and Applications written by Med Amine Laribi and published by Springer Nature. This book was released on 2023-04-15 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering the proceedings of the 6th IFToMM International Conference on Mechanisms, Transmissions, and Applications (MeTrApp), held in Poitiers, France, on May 24-26, 2023, this volume covers topics such as mechanism and machinery design, parallel manipulators, robotics and mechatronics, control applications, mechanical transmissions, cam and gear mechanisms, and dynamics of machinery. MeTrApp 2019 provided researchers, scientists, industry experts, and graduate students from around the globe with a platform to share their cutting-edge work on mechanisms, transmissions, and their applications. The proceedings extend this platform to all researchers, scientists, industry experts, and students interested in these fields.
Download or read book Statics and Kinematics with Applications to Robotics written by Joseph Duffy and published by Cambridge University Press. This book was released on 1996-05-31 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough introduction to statics and first-order instantaneous kinematics with applications to robotics.
Download or read book Advanced Theory of Constraint and Motion Analysis for Robot Mechanisms written by Jingshan Zhao and published by Academic Press. This book was released on 2018-10-30 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Theory of Constraint and Motion Analysis for Robot Mechanisms provides a complete analytical approach to the invention of new robot mechanisms and the analysis of existing designs based on a unified mathematical description of the kinematic and geometric constraints of mechanisms. Beginning with a high level introduction to mechanisms and components, the book moves on to present a new analytical theory of terminal constraints for use in the development of new spatial mechanisms and structures. It clearly describes the application of screw theory to kinematic problems and provides tools that students, engineers and researchers can use for investigation of critical factors such as workspace, dexterity and singularity.
Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.
Download or read book Theory of Parallel Mechanisms written by Zhen Huang and published by Springer Science & Business Media. This book was released on 2012-07-26 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains mechanism analysis and synthesis. In mechanism analysis, a mobility methodology is first systematically presented. This methodology, based on the author's screw theory, proposed in 1997, of which the generality and validity was only proved recently, is a very complex issue, researched by various scientists over the last 150 years. The principle of kinematic influence coefficient and its latest developments are described. This principle is suitable for kinematic analysis of various 6-DOF and lower-mobility parallel manipulators. The singularities are classified by a new point of view, and progress in position-singularity and orientation-singularity is stated. In addition, the concept of over-determinate input is proposed and a new method of force analysis based on screw theory is presented. In mechanism synthesis, the synthesis for spatial parallel mechanisms is discussed, and the synthesis method of difficult 4-DOF and 5-DOF symmetric mechanisms, which was first put forward by the author in 2002, is introduced in detail. Besides, the three-order screw system and its space distribution of the kinematic screws for infinite possible motions of lower mobility mechanisms are both analyzed.
Download or read book Serial and Parallel Robot Manipulators written by Serdar Küçük and published by BoD – Books on Demand. This book was released on 2012-03-30 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The robotics is an important part of modern engineering and is related to a group of branches such as electric
