Download or read book Engineering and Scientific Computing with Scilab written by Claude Gomez and published by Springer Science & Business Media. This book was released on 1999-07-01 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplementary files run on UNIX and Windows 95/98/NT
Download or read book Modeling and Simulation in Scilab Scicos with ScicosLab 4 4 written by Stephen L. Campbell and published by Springer Science & Business Media. This book was released on 2006-10-12 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scilab and its Scicos block diagram graphical editor, with a special emphasis on modeling and simulation tools. The first part is a detailed Scilab tutorial, and the second is dedicated to modeling and simulation of dynamical systems in Scicos. The concepts are illustrated through numerous examples, and all code used in the book is available to the reader.
Download or read book Digital Image Processing using SCILAB written by Rohit M. Thanki and published by Springer. This book was released on 2018-05-07 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides basic theories and implementations using SCILAB open-source software for digital images. The book simplifies image processing theories and well as implementation of image processing algorithms, making it accessible to those with basic knowledge of image processing. This book includes many SCILAB programs at the end of each theory, which help in understanding concepts. The book includes more than sixty SCILAB programs of the image processing theory. In the appendix, readers will find a deeper glimpse into the research areas in the image processing.
Download or read book Computing in Scilab written by Chetna Jain and published by Cambridge University Press. This book was released on 2022-09-30 with total page 395 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on data visualization and computing using Scilab. It is designed for undergraduate students of physics, and electronics.
Download or read book Arduino and Scilab based Projects written by Rajesh Singh and published by Bentham Science Publishers. This book was released on 2019-04-08 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: Arduino and Scilab based Projects provides information ranging from the basics to advanced knowledge of Arduino and its interfacing with input/output devices (display devices, actuators, sensors), communication modules (RF modem, Zigbee) and Scilab. It also provides embedded system based on Arduino with simulation, programming and interfacing with Scilab, Arduino interfacing with Scilab with and without Arduino 1.1 packages. Chapters are arranged in an easy-to-understand sequence that enhances the learning experience for readers. Descriptions of real time project prototypes with programming and simulation of Arduino and Scilab.
Download or read book Introduction to Scilab written by Sandeep Nagar and published by Apress. This book was released on 2017-11-11 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: Familiarize yourself with Scilab using this concise, practical tutorial that is focused on writing code to learn concepts. Starting from the basics, this book covers array-based computing, plotting, and working with files in Scilab. Introduction to Scilab is useful for industry engineers, researchers, and students who are looking for open-source solutions for numerical computation. In this book you will learn by doing, avoiding technical jargon, which makes the concepts easy to learn. First you’ll see how to run basic calculations, absorbing technical complexities incrementally as you progress toward advanced topics. Throughout, the language is kept simple to ensure that readers at all levels can grasp the concepts. After reading this book, you will come away with sample code that can be re-purposed and applied to your own projects using Scilab. What You'll Learn Apply sample code to your engineering or science problems Work with Scilab arrays, functions, and loops Use Scilab’s plotting functions for data visualization Solve numerical computing and computational engineering problems with Scilab Who This Book Is For Engineers, scientists, researchers, and students who are new to Scilab. Some prior programming experience would be helpful but not required.
Download or read book SCILAB A Free Software To MATLAB written by Achuthsankar S Nair and published by S. Chand Publishing. This book was released on 2012 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductio To Scilab | The Scilab Environment | Scalars & Vectors | Matrices | Programming In Scilab | Polynomials | Menus And Dialog Boxes | Graphic Output | String Handling Functions | Statitics | Image Processing Using | Scicos Tool Box Functions | Scicos Visual Editor
Download or read book Simulation of ODE PDE Models with MATLAB OCTAVE and SCILAB written by Alain Vande Wouwer and published by Springer. This book was released on 2014-06-07 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB shows the reader how to exploit a fuller array of numerical methods for the analysis of complex scientific and engineering systems than is conventionally employed. The book is dedicated to numerical simulation of distributed parameter systems described by mixed systems of algebraic equations, ordinary differential equations (ODEs) and partial differential equations (PDEs). Special attention is paid to the numerical method of lines (MOL), a popular approach to the solution of time-dependent PDEs, which proceeds in two basic steps: spatial discretization and time integration. Besides conventional finite-difference and element techniques, more advanced spatial-approximation methods are examined in some detail, including nonoscillatory schemes and adaptive-grid approaches. A MOL toolbox has been developed within MATLAB®/OCTAVE/SCILAB. In addition to a set of spatial approximations and time integrators, this toolbox includes a collection of application examples, in specific areas, which can serve as templates for developing new programs. Simulation of ODE/PDE Models with MATLAB®, OCTAVE and SCILAB provides a practical introduction to some advanced computational techniques for dynamic system simulation, supported by many worked examples in the text, and a collection of codes available for download from the book’s page at www.springer.com. This text is suitable for self-study by practicing scientists and engineers and as a final-year undergraduate course or at the graduate level.
Download or read book Matrix Structural Analysis and the Finite Element Methods Using Scilab and Octave written by Bedilu Habte and published by CRC Press. This book was released on 2024-08-30 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers code development for structural analysis and includes topics from finite element methods such as modeling and analysis of continuum structures. It explains the concepts showing derivation of necessary equations, relationships, and steps in solving structural analysis problems. It contains worked examples, problem sets, and ample Scilab and Octave codes to teach structural analysis techniques using these softwares. Features: Enables readers to distinguish between the flexibility and the stiffness methods of structural analysis. Clarifies the procedures in the direct stiffness methods as applied to discrete structures and use of these for the analysis of 2D and 3D structures. Presents treatment of Finite Element Methods as a logical extension of the Direct Stiffness Method. Provides sufficient solved examples and didactic problems (with solutions) focusing on the analysis of statically indeterminate structures. Treats discrete and continuum structural analysis using similar matrix analysis procedures. Focused on problem solving through programming, this book guides senior undergraduate and graduate students in structural and civil engineering.
Download or read book Engineering and Scientific Computing with Scilab written by Claude Gomez and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supplementary files run on UNIX and Windows 95/98/NT
Download or read book Numerical and Statistical Methods with SCILAB for Science and Engineering written by Gilberto E. Urroz and published by . This book was released on 2001 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematics and statistics with the free software SCILAB (http://www-rocq.inria.fr/scilab/)
Download or read book Modeling and Simulation in Scilab Scicos with ScicosLab 4 4 written by Stephen L. Campbell and published by Springer Science & Business Media. This book was released on 2009-12-21 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scilab and its Scicos block diagram graphical editor, with a special emphasis on modeling and simulation tools. The first part is a detailed Scilab tutorial, and the second is dedicated to modeling and simulation of dynamical systems in Scicos. The concepts are illustrated through numerous examples, and all code used in the book is available to the reader.
Download or read book Introduction to Xcos written by Rachna Verma and published by Independently Published. This book was released on 2020-08 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Xcos is a very powerful and open source block-based modeling and simulation system for dynamical systems. Its capabilities are comparable to commercially available block-based modeling and simulation tools, including Simulink(R), one of the most popular commercial tool. Xcos is useful for modeling continuous and discrete dynamical systems. Further, it provides facilities to seamlessly integrate continuous and discrete components in a single model, making it capable to handle hybrid dynamical systems. Xcos provides a modular approach to model complex dynamical systems using a block diagram editor. Xcos contains a rich library of commonly used blocks, arranged in various palettes for the convenience of searching them, for elementary operations needed to construct models of many dynamical systems. These blocks can be dragged and dropped into the model editor to create a simulation model. For advanced users, Xcos provides facilities to create new blocks and to create their own libraries to further extend the capabilities of Xcos. Since Xcos is available free of cost to everyone across the globe and is continuously upgraded by a strong team of open source developers, it is suitable for all undergraduate students, researchers, professors and professionals in any field of Science and Engineering. Further, many commercial developers are also using it to reduce their project cost and has reported many successful applications.Starting from the basic concepts, the book gradually builds advanced concepts, making it suitable for freshmen and professionals. The Xcos models of all the examples included in this book are available at https: //github.com/arvindrachna/Introduction_to_Xcos. The book consists of the following 15 chapters: Chapter 1: Introduction to XcosChapter 2: Sources PaletteChapter 3: Sinks PaletteChapter 4: Mathematical Operations PaletteChapter 5: Matrix Operation PaletteChapter 6: Signal Routing PaletteChapter 7: Event Handling PaletteChapter 8: Integer PaletteChapter 9: Continuous Time Systems PaletteChapter 10: Discrete Time Systems PaletteChapter 11: Discontinuities PaletteChapter 12: Port and Subsystem PaletteChapter 13: User-Defined Functions Palette and Construction of a New BlockChapter 14: Illustrative Solutions of Differential Equations using XcosChapter 15: Modelica based blocks in Xcos
Download or read book Introduction to Scilab Student Edition written by Arvind Verma and published by . This book was released on 2018-09-05 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scilab is a very powerful, free and open-source software package for scientific and technical computation, visualization and programming. It includes a large number of general purpose and specialized functions, using state of the art algorithms, for numerical computation. These functions are organized in libraries called toolboxes that cover areas such as simulation, optimization, image processing, control and signal processing. With easy to use high level programming language and huge library of functions, Scilab reduces considerably the burden of programming for scientific and technical applications. It can also be interactively used as a very powerful scientific calculator. Since Scilab is available free of cost to everyone across the globe and is continuously upgraded by a strong team of open source developers, it is suitable for all undergraduate students, researchers, professors and professionals in any field of Science and Engineering. Further, many commercial developers are also using it to reduce their project cost and has reported many successful applications.This book is written following several years of teaching the software to our students in introductory courses in numerical methods. The basic objective to write this book is to teach Scilab in a friendly, non-intimidating fashion, without any previous programming experience. Therefore, the book is written in simple language with many sample problems in mathematics, science, and engineering. Starting from the basic concepts, the book gradually builds advanced concepts, making it suitable for freshmen and professionals. The source codes of all the examples presented in this book can be downloaded from https://github.com/arvindrachna/Introduction_to_ScilabFor promoting outcome based learning, each chapter of the book starts with chapter objectives and lucidly introduces the basic concepts, with sample examples, to achieve those objectives. Each chapter concludes with a summary and a list of key terms to recapitulate the learned concepts. Finally, the chapter ends with exercise problems so as students can apply the concepts learned in the chapter.The book consists of seven chapters. The first chapter gives a focused introduction to Scilab and explains how one can install the software on ones machine. The second chapter introduces the core concepts of Scilab, a matrix based technical computing environment. This chapter also introduces how the software can be used in its interactive mode to solve scientific and technical problems. The third chapter introduces how to create and manipulate vectors and matrices in Scilab. It also introduces array and matrix operators. The fourth chapter explains how polynomials can be processed in Scilab. Polynomial operations, differentiation and integration are also introduced. The fifth chapter explains graphics capabilities of Scilab. Various 2D and 3D graphics functions are explained in this chapter. The sixth chapter is focused on the programming capabilities of the software. Various programming constructs are explained with examples. The last chapter explains basic numerical methods and how to create Scilab programs for them. This chapter helps students to apply the learned concepts to actual numerical method problems. The book ends with an appendix of commonly used Scilab commands and functions.Table of Contents1Introduction to Scilab2Basics of Scilab3Vectors and Matrices4Polynomials5Scilab Graphics6Programming in Scilab7Numerical Methods Using Scilab8Appendix I : Commonly Used Scilab Functions
Download or read book Fractional order Systems and PID Controllers written by Kishore Bingi and published by Springer Nature. This book was released on 2019-10-31 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed study on fractional-order, set-point, weighted PID control strategies and the development of curve-fitting-based approximation techniques for fractional-order parameters. Furthermore, in all the cases, it includes the Scilab-based commands and functions for easy implementation and better understanding, and to appeal to a wide range of readers working with the software. The presented Scilab-based toolbox is the first toolbox for fractional-order systems developed in open-source software. The toolboxes allow time and frequency domains as well as stability analysis of the fractional-order systems and controllers. The book also provides real-time examples of the control of process plants using the developed fractional-order based PID control strategies and the approximation techniques. The book is of interest to readers in the areas of fractional-order controllers, approximation techniques, process modeling, control, and optimization, both in industry and academia. In industry, the book is particularly valuable in the areas of research and development (R&D) as well as areas where PID controllers suffice – and it should be noted that around 80% of low-level controllers in industry are PID based. The book is also useful where conventional PIDs are constrained, such as in industries where long-term delay and non-linearity are present. Here it can be used for the design of controllers for real-time processes. The book is also a valuable teaching and learning resource for undergraduate and postgraduate students.
Download or read book Red Hat Linux Unleashed written by Kamran Husain and published by Sams. This book was released on 1996 with total page 1180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a team of experts, Red Hat Linux Unleashed is your complete guide to getting the most from Linux. This book and CD-ROM work together to provide you with a complete version of Red Hat Linux 3.0.3 and all of the tools, as well as detailed coverage of every aspect of the Linux system.
Download or read book Designing Embedded Systems with PIC Microcontrollers written by Tim Wilmshurst and published by Elsevier. This book was released on 2006-10-24 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems with PIC Microcontrollers: Principles and Applications is a hands-on introduction to the principles and practice of embedded system design using the PIC microcontroller. Packed with helpful examples and illustrations, the book provides an in-depth treatment of microcontroller design as well as programming in both assembly language and C, along with advanced topics such as techniques of connectivity and networking and real-time operating systems. In this one book students get all they need to know to be highly proficient at embedded systems design. This text combines embedded systems principles with applications, using the16F84A, 16F873A and the 18F242 PIC microcontrollers. Students learn how to apply the principles using a multitude of sample designs and design ideas, including a robot in the form of an autonomous guide vehicle. Coverage between software and hardware is fully balanced, with full presentation given to microcontroller design and software programming, using both assembler and C. The book is accompanied by a companion website containing copies of all programs and software tools used in the text and a 'student' version of the C compiler. This textbook will be ideal for introductory courses and lab-based courses on embedded systems, microprocessors using the PIC microcontroller, as well as more advanced courses which use the 18F series and teach C programming in an embedded environment. Engineers in industry and informed hobbyists will also find this book a valuable resource when designing and implementing both simple and sophisticated embedded systems using the PIC microcontroller. *Gain the knowledge and skills required for developing today's embedded systems, through use of the PIC microcontroller.*Explore in detail the 16F84A, 16F873A and 18F242 microcontrollers as examples of the wider PIC family.*Learn how to program in Assembler and C.*Work through sample designs and design ideas, including a robot in the form of an autonomous guided vehicle.*Accompanied by a CD-ROM containing copies of all programs and software tools used in the text and a 'student' version of the C complier.
