Download or read book Scientific Wet Process Technology for Innovative LSI FPD Manufacturing written by Tadahiro Ohmi and published by CRC Press. This book was released on 2018-10-03 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: As science pushes closer toward the atomic size scale, new challenges arise to slow the pace of the miniaturization that has transformed our society and fueled the information age. New technologies are necessary to surpass these obstacles and realize the tremendous growth predicted by Moore's law. Assembled from the works of pioneering researchers, Scientific Wet Process Technology for Innovative LSI/FPD Manufacturing presents new developments and technologies for producing the next generation of electronic circuits and displays. This book introduces radical-reaction-based semiconductor manufacturing technologies that overcome the limitations of the existing molecule-reaction-based technologies. It systematically details the procedures and underlying concepts involved in wet process technologies and applications. Following an introduction to semiconductor surface chemical electronics, expert contributors discuss the principles and technology of high-performance wet cleaning; etching technologies and processes; antistatic technology; wet vapor resist stripping technology; and process and safety technologies including waste reclamation, chemical composition control, and ultrapure water and liquid chemical supply systems and materials for fluctuation-free facilities. Currently, large production runs are needed to balance the costs of acquiring and tuning equipment for specialized operating conditions. Scientific Wet Process Technology for Innovative LSI/FPD Manufacturing explains the technologies and processes used to meet the demand for variety and low volumes that exists in today's digital electronics marketplace.
Download or read book Scientific Wet Process Technology for Innovative LSI FPD Manufacturing written by Tadahiro Ohmi and published by CRC Press. This book was released on 2018-10-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: As science pushes closer toward the atomic size scale, new challenges arise to slow the pace of the miniaturization that has transformed our society and fueled the information age. New technologies are necessary to surpass these obstacles and realize the tremendous growth predicted by Moore's law. Assembled from the works of pioneering researchers, Scientific Wet Process Technology for Innovative LSI/FPD Manufacturing presents new developments and technologies for producing the next generation of electronic circuits and displays. This book introduces radical-reaction-based semiconductor manufacturing technologies that overcome the limitations of the existing molecule-reaction-based technologies. It systematically details the procedures and underlying concepts involved in wet process technologies and applications. Following an introduction to semiconductor surface chemical electronics, expert contributors discuss the principles and technology of high-performance wet cleaning; etching technologies and processes; antistatic technology; wet vapor resist stripping technology; and process and safety technologies including waste reclamation, chemical composition control, and ultrapure water and liquid chemical supply systems and materials for fluctuation-free facilities. Currently, large production runs are needed to balance the costs of acquiring and tuning equipment for specialized operating conditions. Scientific Wet Process Technology for Innovative LSI/FPD Manufacturing explains the technologies and processes used to meet the demand for variety and low volumes that exists in today's digital electronics marketplace.
Download or read book Istc cstic 2009 cistc written by David Huang and published by The Electrochemical Society. This book was released on 2009-03 with total page 1124 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISTC/CSTIC is an annual semiconductor technology conference covering all the aspects of semiconductor technology and manufacturing, including devices, design, lithography, integration, materials, processes, manufacturing as well as emerging semiconductor technologies and silicon material applications. ISTC/CSTIC 2009 was merged by ISTC (International Semiconductor Technology Conference) and CSTIC (China Semiconductor Technology International Conference), the two industry leading technical conferences in China, and consisted of one plenary session and nine technical symposia. This issue of ECS Transactions contains 159 papers from the conference.
Download or read book Proceedings of the 5th Joint ASME JSME Fluids Engineering Division Summer Conference 2007 parts A and B Symposia written by American Society of Mechanical Engineers. Fluids Engineering Division and published by . This book was released on 2007 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultraclean Surface Processing of Silicon Wafers written by Takeshi Hattori and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 634 pages. Available in PDF, EPUB and Kindle. Book excerpt: A totally new concept for clean surface processing of Si wafers is introduced in this book. Some fifty distinguished researchers and engineers from the leading Japanese semiconductor companies, such as NEC, Hitachi, Toshiba, Sony and Panasonic as well as from several universities reveal to us for the first time the secrets of these highly productive institutions. They describe the techniques and equipment necessary for the preparation of clean high-quality semiconductor surfaces as a first step in high-yield/high-quality device production. This book thus opens the door to the manufacturing of reliable nanoscale devices and will be extremely useful for every engineer, physicist and technician involved in the production of silicon semiconductor devices.
Download or read book Membrane Distillation Process written by Alessandra Criscuoli and published by MDPI. This book was released on 2021-09-10 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book deals with the latest research on membrane distillation. New membrane and module designs, low-temperature applications, integration with other membrane units and pilot scale investigations are presented and discussed.
Download or read book Silicon Processing for the VLSI Era written by Stanley Wolf and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Semiconductor Manufacturing Technology written by Yoshio Nishi and published by CRC Press. This book was released on 2017-12-19 with total page 3276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Retaining the comprehensive and in-depth approach that cemented the bestselling first edition's place as a standard reference in the field, the Handbook of Semiconductor Manufacturing Technology, Second Edition features new and updated material that keeps it at the vanguard of today's most dynamic and rapidly growing field. Iconic experts Robert Doering and Yoshio Nishi have again assembled a team of the world's leading specialists in every area of semiconductor manufacturing to provide the most reliable, authoritative, and industry-leading information available. Stay Current with the Latest Technologies In addition to updates to nearly every existing chapter, this edition features five entirely new contributions on... Silicon-on-insulator (SOI) materials and devices Supercritical CO2 in semiconductor cleaning Low-κ dielectrics Atomic-layer deposition Damascene copper electroplating Effects of terrestrial radiation on integrated circuits (ICs) Reflecting rapid progress in many areas, several chapters were heavily revised and updated, and in some cases, rewritten to reflect rapid advances in such areas as interconnect technologies, gate dielectrics, photomask fabrication, IC packaging, and 300 mm wafer fabrication. While no book can be up-to-the-minute with the advances in the semiconductor field, the Handbook of Semiconductor Manufacturing Technology keeps the most important data, methods, tools, and techniques close at hand.
Download or read book Proceedings of the IV Advanced Ceramics and Applications Conference written by Bill Lee and published by Springer. This book was released on 2017-01-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the Proceedings of III Advanced Ceramics and Applications conference, held in Belgrade, Serbia in 2014. It contains 25 papers on various subjects regarding preparation, characterization and application of advanced ceramic materials.
Download or read book Information Resources Directory written by and published by . This book was released on 1989 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Environmental Acronyms Abbreviations and Glossary of Terms written by Executive Enterprises, Inc. and published by Wiley. This book was released on 1991-08-01 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This useful guide contains more than 3,000 environmental acronyms and abbreviations. It also includes a glossary of more than 1,000 environmental terms for those frequently used but difficult to find expressions, written in non-technical, easy-to-understand language.
Download or read book Dictionary of Medical Acronyms and Abbreviations written by Stanley Jablonski and published by Hanley & Belfus. This book was released on 2004-09 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dictionary lists acronyms and abbreviations occurring with a reasonable frequency in the literature of medicine and the health care professions. Abbreviations and acronyms are given in capital letters, with no punctuation, and with concise definitions. The beginning sections also include symbols, genetic symbols, and the Greek alphabet and symbols.
Download or read book Applications of Organic and Printed Electronics written by Eugenio Cantatore and published by Springer Science & Business Media. This book was released on 2012-09-19 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain. The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.
Download or read book Instrument Engineers Handbook Volume Two written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest update to Bela Liptak's acclaimed "bible" of instrument engineering is now available. Retaining the format that made the previous editions bestsellers in their own right, the fourth edition of Process Control and Optimization continues the tradition of providing quick and easy access to highly practical information. The authors are practicing engineers, not theoretical people from academia, and their from-the-trenches advice has been repeatedly tested in real-life applications. Expanded coverage includes descriptions of overseas manufacturer's products and concepts, model-based optimization in control theory, new major inventions and innovations in control valves, and a full chapter devoted to safety. With more than 2000 graphs, figures, and tables, this all-inclusive encyclopedic volume replaces an entire library with one authoritative reference. The fourth edition brings the content of the previous editions completely up to date, incorporates the developments of the last decade, and broadens the horizons of the work from an American to a global perspective. Béla G. Lipták speaks on Post-Oil Energy Technology on the AT&T Tech Channel.
Download or read book Hybrid Nanocomposites for Nanotechnology written by Lhadi Merhari and published by Springer Science & Business Media. This book was released on 2009-03-03 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest advances in polymer-inorganic nanocomposites, with particular focus on high-added-value applications in fields including electronics, optics, magnetism and biotechnology. The unique focus of this book is on electronic, optical, magnetic and biomedical applications of hybrid nanocomposites. Coverage includes: Synthesis methods and issues and production scale-up; Characterization methods; Electronic applications; Optical applications and Photonics; Magnetic applications; and Biomedical applications. The book offers readers a solid grasp of the state of the art, and of current challenges in non-traditional applications of hybrid nanocomposites.
Download or read book Organic and Printed Electronics written by Giovanni Nisato and published by CRC Press. This book was released on 2016-04-27 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of organic and printed electronics is well established in terms of academic, scientific, and technological research but is still an emerging one in terms of mass industrial applications such as OLED displays and lighting and organic photovoltaics. This book provides a comprehensive introduction to organic and printed electronics, their fundamental aspects, core technologies, and applications, and it is the first book of its kind specifically designed to address students in their final undergraduate or beginning graduate studies, as well as engineers interested in approaching this field.
Download or read book Fundamental Principles of Optical Lithography written by Chris Mack and published by John Wiley & Sons. This book was released on 2011-08-10 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of an integrated circuit requires a variety of physical and chemical processes to be performed on a semiconductor substrate. In general, these processes fall into three categories: film deposition, patterning, and semiconductor doping. Films of both conductors and insulators are used to connect and isolate transistors and their components. By creating structures of these various components millions of transistors can be built and wired together to form the complex circuitry of modern microelectronic devices. Fundamental to all of these processes is lithography, ie, the formation of three-dimensional relief images on the substrate for subsequent transfer of the pattern to the substrate. This book presents a complete theoretical and practical treatment of the topic of lithography for both students and researchers. It comprises ten detailed chapters plus three appendices with problems provided at the end of each chapter. Additional Information: Visiting http://www.lithoguru.com/textbook/index.html enhances the reader's understanding as the website supplies information on how you can download a free laboratory manual, Optical Lithography Modelling with MATLAB®, to accompany the textbook. You can also contact the author and find help for instructors.
