Download or read book Scientific Computing in Electrical Engineering SCEE 2008 written by Luis R.J. Costa and published by Springer Science & Business Media. This book was released on 2010-06-14 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of 65 selected papers presented at the 7th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in Espoo, Finland, in 2008. The aim of the SCEE 2008 conference was to bring together scientists from academia and industry, e.g. mathematicians, electrical engineers, computer scientists, and physicists, with the goal of intensive discussions on industrially relevant mathematical problems, with an emphasis on modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems.This extensive reference work is divided into five parts: 1. Computational electromagnetics, 2. Circuit simulation, 3. Coupled problems, 4. Mathematical and computational methods, and 5. Model-order reduction. Each part starts with an general introduction followed by the actual papers.

Download or read book Scientific Computing in Electrical Engineering SCEE 2008 written by Luis R.J. Costa and published by Springer. This book was released on 2010-06-19 with total page 588 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scienti?c Computing in Electrical Engineering (SCEE) is an international c- ference series, which started as a national German meeting held in Darmstadt (1997) and Berlin (1998), both under the auspices of the Deutscher Mathematiker Verein. The ?rst truly international SCEE conference was organized in 2000 in Warnemunde, ̈ Germany, by the University of Rostock. In 2002, the 4th SCEE c- ference took place in Eindhoven, The Netherlands, jointly organized by the Ei- hoven University of Technologyand Philips Research LaboratoriesEindhoven.The 5th SCEE conference was held in 2004 in Capo D’Orlando, Italy, jointly organized by Universita di Catania and Consorzio Catania Ricerche. The venue of the 6th SCEE conference was Sinaia, Romania, in 2006, organized by the Politehnica U- versity of Bucharest. The 7th International Conference on Scienti?c Computing in Electrical En- neering (SCEE 2008) was held in Espoo, Finland, from September 28 to October 3, 2008. It was organized by the Helsinki University of Technology; Faculty of Electronics, Communications and Automation; Department of Radio Science and Engineering; Circuit Theory Group. (Details on the SCEE 2008 conference are at http://radio.tkk.fi/en/conferences/scee2008/).

Download or read book Scientific Computing in Electrical Engineering SCEE 2010 written by Bastiaan Michielsen and published by Springer Science & Business Media. This book was released on 2012-01-06 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected from papers presented at the 8th Scientific Computation in Electrical Engineering conference in Toulouse in 2010, the contributions to this volume cover every angle of numerically modelling electronic and electrical systems, including computational electromagnetics, circuit theory and simulation and device modelling. On computational electromagnetics, the chapters examine cutting-edge material ranging from low-frequency electrical machine modelling problems to issues in high-frequency scattering. Regarding circuit theory and simulation, the book details the most advanced techniques for modelling networks with many thousands of components. Modelling devices at microscopic levels is covered by a number of fundamental mathematical physics papers, while numerous papers on model order reduction help engineers and systems designers to bring their modelling of industrial-scale systems within the reach of present-day computational power. Complementing these more specific papers, the volume also contains a selection of mathematical methods which can be used in any application domain.

Download or read book Scientific Computing in Electrical Engineering written by Ulrich Langer and published by Springer. This book was released on 2018-04-23 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of selected papers presented at the 11th International Conference on Scientific Computing in Electrical Engineering (SCEE), held in St. Wolfgang, Austria, in 2016, showcases the state of the art in SCEE. The aim of the SCEE 2016 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and devices, electromagnetic fields, and coupled problems. The focus in methodology was on model order reduction and uncertainty quantification. This extensive reference work is divided into six parts: Computational Electromagnetics, Circuit and Device Modeling and Simulation, Coupled Problems and Multi‐Scale Approaches in Space and Time, Mathematical and Computational Methods Including Uncertainty Quantification, Model Order Reduction, and Industrial Applications. Each part starts with a general introduction, followed by the respective contributions. This book will appeal to mathematicians and electrical engineers. Further, it introduces algorithm and program developers to recent advances in the other fields, while industry experts will be introduced to new programming tools and mathematical methods.

Download or read book Scientific Computing in Electrical Engineering written by Martijn van Beurden and published by Springer Nature. This book was released on 2022-03-11 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference has an interdisciplinary focus and aims to bring together scientists – mathematicians, electrical engineers, computer scientists, and physicists, from universities and industry – to have in-depth discussions of the latest scientific results in Computational Science and Engineering relevant to Electrical Engineering and to stimulate and inspire active participation of young researchers.

Download or read book Scientific Computing in Electrical Engineering written by Giuseppe Nicosia and published by Springer Nature. This book was released on 2020-09-10 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of selected papers presented at the 12th International Conference on Scientific Computing in Electrical Engineering, SCEE 2018, held in Taormina, Sicily, Italy, in September 2018, showcases the state of the art in SCEE. The aim of the SCEE 2018 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and of electromagnetic fields. This extensive reference work is divided into five parts: Computational Electromagnetics, Device Modeling and Simulation, Circuit Simulation, Mathematical and Computational Methods, Model Order Reduction. Each part starts with a general introduction, followed by the respective contributions. The book will appeal to mathematicians and electrical engineers. Further, it introduces algorithm and program developers to recent advances in the other fields, while industry experts will be introduced to new programming tools and mathematical methods.

Download or read book Scientific Computing in Electrical Engineering written by Wilhelmus H. Schilders and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific Computing in Electrical Engineering written by Jan Sykulski and published by . This book was released on 2014-07-29 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Scientific Computing in Electrical Engineering (SCEE) 2012 conference was held September 11-14, 2012 in Zürich Switzerland. The focus of SCEE is on the following topics, with an emphasis on communicating new ideas and algorithms for numerical simulations: computational electromagnetics; circuit and device modelling and simulation; coupled problems; mathematical and computational methods; and model order reduction. Seventeen selected contributions to the conference are published in this ebook of COMPEL and were subject to the journal's regular peer-reviewing procedures.

Download or read book Scientific Computing in Electrical Engineering written by Giuseppe Nicosia and published by Springer. This book was released on 2021-09-11 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection of selected papers presented at the 12th International Conference on Scientific Computing in Electrical Engineering, SCEE 2018, held in Taormina, Sicily, Italy, in September 2018, showcases the state of the art in SCEE. The aim of the SCEE 2018 conference was to bring together scientists from academia and industry, mathematicians, electrical engineers, computer scientists, and physicists, and to promote intensive discussions on industrially relevant mathematical problems, with an emphasis on the modeling and numerical simulation of electronic circuits and of electromagnetic fields. This extensive reference work is divided into five parts: Computational Electromagnetics, Device Modeling and Simulation, Circuit Simulation, Mathematical and Computational Methods, Model Order Reduction. Each part starts with a general introduction, followed by the respective contributions. The book will appeal to mathematicians and electrical engineers. Further, it introduces algorithm and program developers to recent advances in the other fields, while industry experts will be introduced to new programming tools and mathematical methods.

Download or read book Progress in Industrial Mathematics at ECMI 2012 written by Magnus Fontes and published by Springer. This book was released on 2014-05-14 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the 17th European Conference on Mathematics for Industry, ECMI2012, held in Lund, Sweden, July 2012, at which ECMI celebrated its 25th anniversary. It covers mathematics in a wide range of applications and methods, from circuit and electromagnetic devices, environment, fibers, flow, medicine, robotics and automotive industry, further applications to methods and education. The book includes contributions from leading figures in business, science and academia that promote the application of mathematics to industry and emphasize industrial sectors that offer the most exciting opportunities. The contributions reinforce the role of mathematics as being a catalyst for innovation as well as an overarching resource for industry and business. The book features an accessible presentation of real-world problems in industry and finance, provides insight and tools for engineers and scientists who will help them to solve similar problems and offers modeling and simulation techniques that will provide mathematicians with a source of fresh ideas and inspiration.

Download or read book System Reduction for Nanoscale IC Design written by Peter Benner and published by Springer. This book was released on 2017-06-02 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the computational challenges posed by the progression toward nanoscale electronic devices and increasingly short design cycles in the microelectronics industry, and proposes methods of model reduction which facilitate circuit and device simulation for specific tasks in the design cycle. The goal is to develop and compare methods for system reduction in the design of high dimensional nanoelectronic ICs, and to test these methods in the practice of semiconductor development. Six chapters describe the challenges for numerical simulation of nanoelectronic circuits and suggest model reduction methods for constituting equations. These include linear and nonlinear differential equations tailored to circuit equations and drift diffusion equations for semiconductor devices. The performance of these methods is illustrated with numerical experiments using real-world data. Readers will benefit from an up-to-date overview of the latest model reduction methods in computational nanoelectronics.

Download or read book Coupled Multiscale Simulation and Optimization in Nanoelectronics written by Michael Günther and published by Springer. This book was released on 2015-06-15 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing complex integrated circuits relies heavily on mathematical methods and calls for suitable simulation and optimization tools. The current design approach involves simulations and optimizations in different physical domains (device, circuit, thermal, electromagnetic) and in a range of electrical engineering disciplines (logic, timing, power, crosstalk, signal integrity, system functionality). COMSON was a Marie Curie Research Training Network created to meet these new scientific and training challenges by (a) developing new descriptive models that take these mutual dependencies into account, (b) combining these models with existing circuit descriptions in new simulation strategies and (c) developing new optimization techniques that will accommodate new designs. The book presents the main project results in the fields of PDAE modeling and simulation, model order reduction techniques and optimization, based on merging the know-how of three major European semiconductor companies with the combined expertise of university groups specialized in developing suitable mathematical models, numerical schemes and e-learning facilities. In addition, a common Demonstrator Platform for testing mathematical methods and approaches was created to assess whether they are capable of addressing the industry’s problems, and to educate young researchers by providing hands-on experience with state-of-the-art problems.

Download or read book Solving Computationally Expensive Engineering Problems written by Slawomir Koziel and published by Springer. This book was released on 2014-10-01 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational complexity is a serious bottleneck for the design process in virtually any engineering area. While migration from prototyping and experimental-based design validation to verification using computer simulation models is inevitable and has a number of advantages, high computational costs of accurate, high-fidelity simulations can be a major issue that slows down the development of computer-aided design methodologies, particularly those exploiting automated design improvement procedures, e.g., numerical optimization. The continuous increase of available computational resources does not always translate into shortening of the design cycle because of the growing demand for higher accuracy and necessity to simulate larger and more complex systems. Accurate simulation of a single design of a given system may be as long as several hours, days or even weeks, which often makes design automation using conventional methods impractical or even prohibitive. Additional problems include numerical noise often present in the simulation data, possible presence of multiple locally optimum designs, as well as multiple conflicting objectives. In this edited book, various techniques that can alleviate solving computationally expensive engineering design problems are presented. One of the most promising approaches is the use of fast replacement models, so-called surrogates, that reliably represent the expensive, simulation-based model of the system/device of interest but they are much cheaper and analytically tractable. Here, a group of international experts summarize recent developments in the area and demonstrate applications in various disciplines of engineering and science. The main purpose of the work is to provide the basic concepts and formulations of the surrogate-based modeling and optimization paradigm, as well as discuss relevant modeling techniques, optimization algorithms and design procedures. Therefore, this book should be useful to researchers and engineers from any discipline where computationally heavy simulations are used on daily basis in the design process.

Download or read book Nanoelectronic Coupled Problems Solutions written by E. Jan W. ter Maten and published by Springer Nature. This book was released on 2019-11-06 with total page 587 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designs in nanoelectronics often lead to challenging simulation problems and include strong feedback couplings. Industry demands provisions for variability in order to guarantee quality and yield. It also requires the incorporation of higher abstraction levels to allow for system simulation in order to shorten the design cycles, while at the same time preserving accuracy. The methods developed here promote a methodology for circuit-and-system-level modelling and simulation based on best practice rules, which are used to deal with coupled electromagnetic field-circuit-heat problems, as well as coupled electro-thermal-stress problems that emerge in nanoelectronic designs. This book covers: (1) advanced monolithic/multirate/co-simulation techniques, which are combined with envelope/wavelet approaches to create efficient and robust simulation techniques for strongly coupled systems that exploit the different dynamics of sub-systems within multiphysics problems, and which allow designers to predict reliability and ageing; (2) new generalized techniques in Uncertainty Quantification (UQ) for coupled problems to include a variability capability such that robust design and optimization, worst case analysis, and yield estimation with tiny failure probabilities are possible (including large deviations like 6-sigma); (3) enhanced sparse, parametric Model Order Reduction techniques with a posteriori error estimation for coupled problems and for UQ to reduce the complexity of the sub-systems while ensuring that the operational and coupling parameters can still be varied and that the reduced models offer higher abstraction levels that can be efficiently simulated. All the new algorithms produced were implemented, transferred and tested by the EDA vendor MAGWEL. Validation was conducted on industrial designs provided by end-users from the semiconductor industry, who shared their feedback, contributed to the measurements, and supplied both material data and process data. In closing, a thorough comparison to measurements on real devices was made in order to demonstrate the algorithms’ industrial applicability.

Download or read book Linear and Nonlinear Model Order Reduction for Numerical Simulation of Electric Circuits written by Kasra Mohaghegh and published by Logos Verlag Berlin GmbH. This book was released on 2010 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing complexity combined with decreasing geometrical sizes in electric circuit design lead to high dimensional dynamical models to be considered by EDA tools. Model order reduction (MOR) has become a popular strategy to decrease the problem's size while preserving its crucial properties. MOR shall achieve accurate statements on a circuit's behavior within an affordable amount of computational time. Just recently, MOR techniques are designed to consider the differential algebraic nature of the underlying models. We present an approach based on an e-embedding, i.e., a strategy applied in the construction of numerical integration schemes for differential algebraic equations (DAEs). The system of DAEs is transformed into an artificial system of ordinary differential equations (ODEs), since MOR schemes for ODEs can be applied now. We construct, analyze and test different strategies with respect to the usage of the parameter e that transforms the DAEs into ODEs. Moreover, accurate mathematical models for MOS-devices introduce highly nonlinear equations. As the packing density of devices is growing in circuit design, huge nonlinear systems appear in practice. It follows an increasing demand for reduced order modeling of nonlinear problems. In the thesis, we also review the status of existing techniques for nonlinear MOR by investigating the performance of the schemes applied in circuit simulation.

Download or read book Simulation of Manufacturing Sequences of Functionally Graded Structures written by Gleim, Tobias and published by kassel university press GmbH. This book was released on 2017-02-10 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: The current paper establishes an axisymmetric model for an inductive heating process. Therein, the fully coupled MAXWELL equations, assuming a temperature dependent permeability, are combined with the non-linear heat conduction equation to yield a monolithic solution strategy. The latter is based on a consistent linearization together with a higher order finite element discretization using GALERKIN'S method in space. For the temporal discretization, the generalized Newmark-? methods, higher order RUNGE-KUTTA methods, and discontinuous and continuous GALERKIN methods are used. Furthermore, the residual error is introduced to open an alternative way to obtain a numerically efficient estimation of the time integration accuracy. Simulation results of the electric, magnetic and thermal fields are provided, together with parameter studies concerning spatial discretization, frequency dependence and penetration depth of the heating zone. Another topic analyzed is the residual error and its estimation quality regarding polynomial degree and time step size. A further aspect of this work is the investigation of the thermal fluid-structure interaction with respect to functionally graded materials. Different coupling strategies for the acceleration of the fixed-point iteration in each time step is in the foreground. Relaxation methods as well as extrapolation methods make it possible to significantly reduce the number of fixed point iterations. At the same time, an adaptive strategy with higher order RUNGE-KUTTA methods can provide a further advantage in combination with acceleration methods.

Download or read book Progress in Industrial Mathematics at ECMI 2010 written by Michael Günther and published by Springer Science & Business Media. This book was released on 2012-04-05 with total page 613 pages. Available in PDF, EPUB and Kindle. Book excerpt: ECMI, the European Consortium for Mathematics in Industry, is the European brand associated with applied mathematics for industry and organizes highly successful biannual conferences. In this series, the ECMI 2010, the 16th European Conference on Mathematics for Industry, was held in the historic city hall of Wuppertal in Germany. It covered the mathematics of a wide range of applications and methods, from circuit and electromagnetic device simulation to model order reduction for chip design, uncertainties and stochastics, production, fluids, life and environmental sciences, and dedicated and versatile methods. These proceedings of ECMI 2010 emphasize mathematics as an innovation enabler for industry and business, and as an absolutely essential pre-requiste for Europe on its way to becoming the leading knowledge-based economy in the world.