Download or read book Extractive Metallurgy of Titanium written by Zhigang Zak Fang and published by Elsevier. This book was released on 2019-11-08 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Titanium: Conventional and Recent Advances in Extraction and Production of Titanium Metal contains information on current and developing processes for the production of titanium. The methods for producing Ti metal are grouped into two categories, including the reduction of TiCl4 and the reduction of TiO2, with their processes classified as either electrochemical or thermochemical. Descriptions of each method or process include both the fundamental principles of the method and the engineering challenges in their practice. In addition, a review of the chemical and physical characteristics of the product produced by each method is included. Sections cover the purity of titanium metal produced based on ASTM and other industry standards, energy consumption, cost and the potential environmental impacts of the processes. Provides information on new and developing low cost, high integrity methods for titanium metal production Discusses new markets for titanium due to the decreased cost of newly developed processes Covers specific information on new methods, including the chemical and physical characteristics produced
Download or read book Scientific and Technological Developments in Extractive Metallurgy written by and published by . This book was released on 1985 with total page 102 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Nickel Cobalt and Platinum Group Metals written by Frank Crundwell and published by Elsevier. This book was released on 2011-07-18 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes and explains the methods by which three related ores and recyclables are made into high purity metals and chemicals, for materials processing. It focuses on present day processes and future developments rather than historical processes. Nickel, cobalt and platinum group metals are key elements for materials processing. They occur together in one book because they (i) map together on the periodic table (ii) occur together in many ores and (iii) are natural partners for further materials processing and materials manufacturing. They all are, for example, important catalysts – with platinum group metals being especially important for reducing car and truck emissions. Stainless steels and CoNiFe airplane engine super alloys are examples of practical usage. The product emphasises a sequential, building-block approach to the subject gained through the author’s previous writings (particularly Extractive Metallurgy of Copper in four editions) and extensive experience. Due to the multiple metals involved and because each metal originates in several types of ore – e.g. tropical ores and arctic ores this necessitates a multi-contributor work drawing from multiple networks and both engineering and science. Synthesizes detailed review of the fundamental chemistry and physics of extractive metallurgy with practical lessons from industrial consultancies at the leading international plants Discusses Nickel, Cobalt and Platinum Group Metals for the first time in one book Reviews extraction of multiple metals from the same tropical or arctic ore Industrial, international and multidisciplinary focus on current standards of production supports best practice use of industrial resources
Download or read book Extraction Metallurgy written by James Duncan Gilchrist and published by Pergamon. This book was released on 1989 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive preparatory textbook on the production of metals from their ores. The structure of previous editions has been preserved, but recent developments in new technology of the 1980s and their impact on the field have been incorporated. The treatment of mineral dressing, reaction mechanisms and hydrometallurgy has been strengthened. An appendix of worked examples supplements numerous examples in the text, and the book is comprehensively indexed and cross-referenced, emphasizing the interrelationship of the many topics covered in the book.
Download or read book Mineral Processing and Extractive Metallurgy written by Corby G. Anderson and published by Society for Mining Metallurgy & Exploration. This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is the information you need to face the ever-increasing technological, economic, environmental, and geopolitical challenges of this industry and ensure long-term productivity and growth for your organization. Mineral Processing and Extractive Metallurgy presents more than a century of innovation drivers that have advanced the mineral processing industry. Trends, developments, and improvements are discussed in depth, and likely areas for future innovations are explored. This proceedings from the successful 2013 symposium features more than 75 subject-matter experts. These authors share their knowledge, experience, and passion for the metallurgical industry. Topics include: Comminution equipment, modeling, and instrumentation Magnetic, electrostatic, density-based, dense medium, and liquid/solid separations Nickel and cobalt, zinc and lead, copper and rare earth hydrometallurgy, and gold and silver extraction Innovations in pyrometallurgy, copper smelting, and the iron and steel industry, and refining of platinum group metals Process mineralogy and laboratory automation, analytical chemistry, and measurement of mineral structure and surface chemistry Environmental breakthroughs in acid rock drainage, tailings management, water and brine treatment, chemical and bacterial water treatment, and air pollution control The papers are accompanied by abundant full-color photographs, figures, illustrations, charts, and author biographies.
Download or read book Extractive Metallurgy of Rare Earths written by Nagaiyar Krishnamurthy and published by CRC Press. This book was released on 2015-12-02 with total page 841 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Edition Now Covers Recycling, Environmental Issues, and Analytical DeterminationEmploying four decades of experience in the rare metal and rare earths industry, the authors of Extractive Metallurgy of Rare Earths, Second Edition present the entire subject of rare earth elements with depth and accuracy. This second edition updates the most impor
Download or read book Extraction 2018 written by Boyd R. Davis and published by Springer. This book was released on 2018-08-18 with total page 2976 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three volume set presents papers from the first collaborative global metallurgy conference focused exclusively on extractive topics, including business and economic issues. Contributions examine new developments in foundational extractive metallurgy topics and techniques, and present the latest research and insights on emerging technologies and issues that are shaping the global extractive metallurgy industry. The book is organized around the following main themes: hydrometallurgy, pyrometallurgy, sulfide flotation, and extractive metallurgy markets and economics.
Download or read book Extractive Metallurgy of Copper written by Anil Kumar Biswas and published by Oxford ; Toronto : Pergamon. This book was released on 1980 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy written by National Research Council (U.S.). Panel on Extractive Metallurgy and published by . This book was released on 1969 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Copper written by A.K. Biswas and published by Elsevier. This book was released on 2013-10-22 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: A completely revised and up-to-date edition containing comprehensive industrial data. The many significant changes which occurred during the 1980s and 1990s are chronicled. Modern high intensity smelting processes are presented in detail, specifically flash, Contop, Isasmelt, Noranda, Teniente and direct-to-blister smelting. Considerable attention is paid to the control of SO2 emissions and manufacture of H2SO4. Recent developments in electrorefining, particularly stainless steel cathode technology are examined. Leaching, solvent extraction and electrowinning are evaluated together with their impact upon optimizing mineral resource utilization. The volume targets the recycling of copper and copper alloy scrap as an increasingly important source of copper and copper alloys. Copper quality control is also discussed and the book incorporates an important section on extraction economics. Each chapter is followed by a summary of concepts previously described and offers suggested further reading and references.
Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 751 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.
Download or read book International Series on Materials Science and Technology written by Anil Kumar Biswas and published by . This book was released on 1980 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Extractive Metallurgy of Copper written by Mark E. Schlesinger and published by Elsevier. This book was released on 2021-12-02 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extractive Metallurgy of Copper, Sixth Edition, expands on previous editions, including sections on orogenesis and copper mineralogy and new processes for efficiently recovering copper from ever-declining Cu-grade mineral deposits. The book evaluates processes for maintaining concentrate Cu grades from lower grade ores. Sections cover the recovery of critical byproducts (e.g., cesium), worker health and safety, automation as a safety tool, and the geopolitical forces that have moved copper metal production to Asia (especially China) and new smelting and refining processes. Indigenous Asian smelting processes are evaluated, along with energy and water requirements, environmental performance, copper electrorefining processes, and sulfur dioxide capture processes (e.g., WSA). The book puts special emphasis on the benefits of recycling copper scrap in terms of energy and water requirements. Comparisons of ore-to-product and scrap-to-product carbon emissions are also made to illustrate the concepts included. Describes copper mineralogy, mining and beneficiation techniques Compares a variety of mining, smelting and converting technologies Provides a complete description of hydrometallurgical and electrometallurgical processes, including process options and recent improvements Includes comprehensive descriptions of secondary copper processing, including scrap collection and upgrading, melting and refining technologies
Download or read book Extractive Metallurgy of Copper written by Mark E. Schlesinger and published by Elsevier. This book was released on 2011-09-02 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: William G.I. Davenport
Download or read book Extractive Metallurgy 1 written by Alain Vignes and published by John Wiley & Sons. This book was released on 2013-03-28 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the processes of mineral transformation, recycling and reclamation of metals, for the purpose of turning metals and alloys into a liquid state ready for pouring. Even though "process metallurgy" is one of the oldest technologies implemented by man, technological innovation, with the development of processes that are both focused on product quality and economically and ecologically efficient, continues to be at the heart of these industries. This book explains the physico-chemical bases of transformations, vital to their understanding and control (optimization of operational conditions), and the foundations in terms of "process engineering" (heat and matter assessment, process coupling: chemical reactions and transport phenomena), vital to the optimal execution and analysis of transformation process operations. This book is addressed to students in the field of metallurgy and to engineers facing the problem of metal and alloy development (operation of an industrial unit or development of a new process).
Download or read book Extractive Metallurgy written by Edward J. Stevenson and published by William Andrew. This book was released on 1977 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering and Technology in Mineral Processing and Extractive Metallurgy written by Shuai Wang and published by Mdpi AG. This book was released on 2022-10-27 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical engineering and technology are the basis of mineral processing and extractive metallurgy. In the long history of human civilization, with the development of science and technology, chemical engineering, mineral processing, metallurgical engineering, and other process technologies have coexisted and mutually benefited each other. More than 100 years ago, chemical engineers summarized the common laws in the process industry and built up the basic theory of unit operations. It is undoubtedly of great significance to study the chemical engineering principles in mineral processing and extractive metallurgy to profoundly understand the essence of mineral separation and extraction, optimizing the technological flow of mineral processing and improving the utilization level of mineral resources. The purpose of this book is to discuss chemical engineering principles in mineral processing and extractive metallurgy to improve the utilization of mineral resources. Experts, technicians, and students in the fields of chemical engineering, metallurgy, and mineral processing are welcome to read this book.
