Download or read book Scattered Data Interpolation Using Combination Method of Triangular Patches written by Azizan Saaban and published by UUM Press. This book was released on 2012-01-02 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is a comprehensive report on scattered data interpolation using combination method of triangular patches where the interpolating surface comprise the combination of quintic Hermite and interior interpolation operators. It is based on the findings of a university grant research project sponsored by Universiti Utara Malaysia. In particular, the contents of this monograph are useful for students and researchers especially in the area of Computer Aided Geometric Design (CAGD) and generally the contents will also benefit academicians as well as practitioners who have interest in the application of the triangulation based interpolation method in real world problems.
Download or read book Mesh Methods written by Viktor A. Rukavishnikov and published by MDPI. This book was released on 2021-03-29 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical models of various natural processes are described by differential equations, systems of partial differential equations and integral equations. In most cases, the exact solution to such problems cannot be determined; therefore, one has to use grid methods to calculate an approximate solution using high-performance computing systems. These methods include the finite element method, the finite difference method, the finite volume method and combined methods. In this Special Issue, we bring to your attention works on theoretical studies of grid methods for approximation, stability and convergence, as well as the results of numerical experiments confirming the effectiveness of the developed methods. Of particular interest are new methods for solving boundary value problems with singularities, the complex geometry of the domain boundary and nonlinear equations. A part of the articles is devoted to the analysis of numerical methods developed for calculating mathematical models in various fields of applied science and engineering applications. As a rule, the ideas of symmetry are present in the design schemes and make the process harmonious and efficient.
Download or read book Mathematical Methods in Applied Sciences written by Luigi Rodino and published by MDPI. This book was released on 2020-03-13 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book includes the seven papers that contributed to the Special Issue of Mathematics entitled “Mathematical Methods in Applied Sciences”. The papers are authored by eminent specialists and aim at presenting to a broad audience some mathematical models which appear in different aspects of modern life. New results in Computational Mathematics are given as well. Emphasis is on Medicine and Public Health, in relation also with Social Sciences. The models in this collection apply in particular to the study of brain cells during a stroke, training management efficiency for elite athletes, and optimal surgical operation scheduling. Other models concern Industry and Economy, as well as Biology and Chemistry. Numerical Methods are represented in particular by scattered data interpolation, spectral collocation, and the use of eigenvalues and eigenvectors of the Laplacian matrix. This book will appeal to scientists, teachers, and graduate students in Mathematics, in particular Numerical Analysis, and will be of interest for scholars in Applied Sciences, particularly in Medicine and Public Health.
Download or read book Theoretical Modelling and Numerical Simulations Toward Industry 4 0 written by Samsul Ariffin Abdul Karim and published by Springer Nature. This book was released on 2020-11-17 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theoretical modeling and numerical simulations applied to drive several applications towards Industrial Revolution 4.0 (IR 4.0). The topics discussed range from theoretical parts to extensive simulations involving many efficient algorithms as well as various statistical techniques. This book is suitable for postgraduate students, researchers as well as other scientists who are working in mathematics, statistics and numerical modeling and simulation.
Download or read book Energy Efficiency in Mobility Systems written by Shaharin Anwar Sulaiman and published by Springer Nature. This book was released on 2019-10-03 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights a diverse range of initiatives that have been launched to attain sustainable mobility systems, in particular regarding the energy efficiency aspect. It offers a valuable reference for various stakeholders in transportation systems, while also sharing new ideas on how transportation can meet the challenges of tomorrow.
Download or read book Advances in Visual Computing written by George Bebis and published by Springer Science & Business Media. This book was released on 2006-10-26 with total page 936 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volume set LNCS 4291 and LNCS 4292 constitutes the refereed proceedings of the Second International Symposium on Visual Computing, ISVC 2006, held in Lake Tahoe, NV, USA in November 2006. The 65 revised full papers and 56 poster papers presented together with 57 papers of ten special tracks were carefully reviewed and selected from more than 280 submissions. The papers cover the four main areas of visual computing.
Download or read book Proceedings of the 6th International Conference on Fundamental and Applied Sciences written by Samsul Ariffin Abdul Karim and published by Springer Nature. This book was released on 2022-01-05 with total page 775 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights latest advancement in Mathematics, Physics and Chemistry. With the theme of “Innovative Science towards Sustainability and Industrial Revolution 4.0”, ICFAS 2020 brings together leading experts, scientific communities and industrialists working in the field of applied sciences and mathematics from all over the world to share the most recent developments and cutting-edge discoveries addressing sustainability and industrial revolution 4.0 in the field. The conference topics include green materials, molecular modelling, catalysis, nanodevices and nanosystems, smart materials applications, solar cells technology, computational mathematics, data analysis and visualization, and numerical analysis. The contents of this book are useful for researchers, students, and industrial practitioners in the areas of Mathematics, Physics and Chemistry as most of the topics are in line with IR 4.0.
Download or read book Computational Science ICCS 2002 written by Peter M.A. Sloot and published by Springer. This book was released on 2003-08-01 with total page 1265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science is the scientific discipline that aims at the development and understanding of new computational methods and techniques to model and simulate complex systems. The area of application includes natural systems - such as biology environ mental and geo-sciences, physics, and chemistry - and synthetic systems such as electronics and financial and economic systems. The discipline is a bridge bet ween 'classical' computer science - logic, complexity, architecture, algorithm- mathematics, and the use of computers in the aforementioned areas. The relevance for society stems from the numerous challenges that exist in the various science and engineering disciplines, which can be tackled by advances made in this field. For instance new models and methods to study environmental issues like the quality of air, water, and soil, and weather and climate predictions through simulations, as well as the simulation-supported development of cars, airplanes, and medical and transport systems etc. Paraphrasing R. Kenway (R.D. Kenway, Contemporary Physics. 1994): 'There is an important message to scientists, politicians, and industrialists: in the future science, the best industrial design and manufacture, the greatest medical progress, and the most accurate environmental monitoring and forecasting will be done by countries that most rapidly exploit the full potential of computational science'. Nowadays we have access to high-end computer architectures and a large range of computing environments, mainly as a consequence of the enormous sti mulus from the various international programs on advanced computing, e.g.
Download or read book Computational Modeling of Vision written by William Uttal and published by CRC Press. This book was released on 1999-02-02 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Defines a unified theory of vision in which nearly independent components of visual stimuli are recombined and synthesized at high levels of neural processing to produce the richness of visual experience. The text illustrates how visual systems gather, process and reconstruct information about objects in two and three dimensions.
Download or read book Mathematics of Surfaces XI written by Malcolm Sabin and published by Springer. This book was released on 2005-10-03 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 11th IMA International Conference on the Mathematics of Surfaces, held in Loughborough, UK in September 2005. The 28 revised full papers presented were carefully reviewed and selected from numerous submissions. Among the topics addressed are Voronoi diagrams, linear systems, curvatures on meshes, approximate parameterization, condition numbers, pythagorean hodographs, artifacts in B-spline surfaces, Bézier surfaces of minimal energy, line subdivision, subdivision surfaces, level sets and symmetry, the topology of algebraic surfaces, embedding graphs in manifolds, recovery of 3D shape from shading, finding optimal feedrates for machining, and improving of range data.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.
Download or read book Transactions on Computational Science VIII written by C. J. Kenneth Tan and published by Springer Science & Business Media. This book was released on 2010-10-19 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th issue of the Transactions on Computational Science has been divided into two parts. Part I, prepared by Guest Editors Nadia Nedjah, Abdelhamid Bouchachia, and Luiza de Macedo Mourelle, consists of 5 detailed papers, presenting state-of-the-art research results on adaptive models for evolutionary computation and their application in various dynamic environments. The 6 papers in Part II take an in-depth look at selected computational science research in the areas of geometric computing, Euclidean distance transform, distributed systems, segmentation, visualization of monotone data, and data interpolation.
Download or read book Mathematical Methods in Computer Aided Geometric Design II written by Tom Lyche and published by Academic Press. This book was released on 2014-05-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Methods in Computer Aided Geometric Design II covers the proceedings of the 1991 International Conference on Curves, Surfaces, CAGD, and Image Processing, held at Biri, Norway. This book contains 48 chapters that include the topics of blossoming, cyclides, data fitting and interpolation, and finding intersections of curves and surfaces. Considerable chapters explore the geometric continuity, geometrical optics, image and signal processing, and modeling of geological structures. The remaining chapters discuss the principles of multiresolution analysis, NURBS, offsets, radial basis functions, rational splines, robotics, spline and Bézier methods for curve and surface modeling, subdivision, terrain modeling, and wavelets. This book will prove useful to mathematicians, computer scientists, and advance mathematics students.
Download or read book JSME International Journal written by and published by . This book was released on 2005 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Science ICCS written by and published by . This book was released on 2002 with total page 1282 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Journal of Physical Science written by and published by . This book was released on 1990 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Malaysian Mathematical Society written by and published by . This book was released on 1997 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
