Download or read book Scale Effects and Homogenisation of the Diffuso Mechanical Behaviour of Organic Matrix Composites written by éour and published by Wiley-Blackwell. This book was released on 2017-04-20 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Behavior of Organic Matrix Composites written by Marco Gigliotti and published by John Wiley & Sons. This book was released on 2018-03-13 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on the effect of ageing (thermo-oxidation, humid ageing) on the mechanical properties of organic matrix composite materials, covering: Bibliographic issues and a detailed state-of-the-art; phenomenological and experimental issues; modelling issues and models parameter identification; illustration and interpretation of experimental tests and proposal for novel test design in the light of the model predictions.
Download or read book Investigation of the Effect of Moisture on the Mechanical Properties of Organic Matrix Composite Materials Using Nuclear Magnetic Resonance written by George A. Matzkanin and published by . This book was released on 1981 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Interfacial Phenomena and the Marangoni Effect written by M. G. Velarde and published by Springer. This book was released on 2014-05-04 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Marangoni (1878), provided a wealth of detailed information on the effects of variations of the potential energy of liquid surfaces and, in particular, flow arising from variations in temperature and surfactant composition. One aspect of this science is seen today to bear on important phenomena associated with the processing of modern materials. The role of the basic effect in technology was probably first demonstrated by chemical engineers in the field of liquid-liquid extraction. Indeed, phenomena attributable to Marangoni flows have been reported in innumerable instances relevant to modern technologies, such as in hot salt corrosion in aeroturbine blades; the drying of solvent-containing paints; the drying of silicon wafers used in electronics; in materials processing, particularly in metallic systems which have been suspected to demonstrate Marangoni flows.
Download or read book Fundamentals of Metallurgy written by S Seetharaman and published by Elsevier. This book was released on 2005-10-10 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: As product specifications become more demanding, manufacturers require steel with ever more specific functional properties. As a result, there has been a wealth of research on how those properties emerge during steelmaking. Fundamentals of metallurgy summarises this research and its implications for manufacturers. The first part of the book reviews the effects of processing on the properties of metals with a range of chapters on such phenomena as phase transformations, types of kinetic reaction, transport and interfacial phenomena. Authors discuss how these processes and the resulting properties of metals can be modelled and predicted. Part two discusses the implications of this research for improving steelmaking and steel properties. With its distinguished editor and international team of contributors, Fundamentals of metallurgy is an invaluable reference for steelmakers and manufacturers requiring high-performance steels in such areas as automotive and aerospace engineering. It will also be useful for those dealing with non-ferrous metals and alloys, material designers for functional materials, environmentalists and above all, high technology industries designing processes towards materials with tailored properties. Summarises key research and its implications for manufacturers Essential reading for steelmakers and manufacturers Written by leading experts from both industry and academia
Download or read book Ice Physics and the Natural Environment written by John S. Wettlaufer and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Advanced Study Institute Ice Physics in the Natural and Endangered Environ ment was held at Acquafredda di Maratea, Italy, from September 7 to 19, 1997. The ASI was designed to study the broad range of ice science and technology, and it brought together an appropriately interdisciplinary group of lecturers and students to study the many facets of the subject. The talks and poster presentations explored how basic molecular physics of ice have important environmental consequences, and, con versely, how natural phenomena present new questions for fundamental study. The of lectures discusses these linkages, in order that overall unity of following sunimary the subject and this volume can be perceived. Not all of the lecturers and participants were able to contribute a written piece, but their active involvement was crucial to the success of the Institute and thereby influenced the content of the volume. We began the Institute by retracing the history of the search for a microscopic un derstanding of melting. Our motivation was straightforward. Nearly every phenome non involving ice in the environment is influenced by the change of phase from solid to liquid or vice-versa. Hence, a sufficiently deep physical picture of the melting tran sition enriches our appreciation of a vast array of geophysical and technical problems.
Download or read book Storming Heaven written by Steve Wright and published by Pluto Press (UK). This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Storming Heave in Steve Wright's unsurpassed study of Italian autonomist Marxism. This new edition remains the only book to examine Italian workerist theory and practice, from its origins in teh anti-Stalinist left of the 1950s to its heyday twenty years later. First developed by Antonio Negri, Mario Tronti, Sergio Bologna and others, workerism, or 'orperaismo', includes the refusal of work, class self-organisation, mass illegality and the extension of revolutionary agency, all of which are still practised today by workers across the world. This edition includes a new chapter looking at the debates around operaismo and Autonomia since the book originally appeared in 2002.
Download or read book Italian Mathematics Between the Two World Wars written by Angelo Guerraggio and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes Italian mathematics in the period between the two World Wars. It analyzes the development by focusing on both the interior and the external influences. Italian mathematics in that period was shaped by a colorful array of strong personalities who concentrated their efforts on a select number of fields and won international recognition and respect in an incredibly short time. Consequently, Italy was considered a third mathematical power after France and Germany.
Download or read book Physical Properties of Polymers written by James E. Mark and published by . This book was released on 1993 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contents have been divided into sections on physical states of polymers and characterization techniques. Chapters on physical states include discussions of the rubber elastic state, the glassy state, melts and concentrated solutions, the crystalline state, and the mesomorphic state. Characterization techniques described are molecular spectroscopy and scattering techniques.
Download or read book CAA2015 written by Stefano Campana and published by Archaeopress Archaeology. This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume brings together all the successful peer-reviewed papers submitted for the proceedings of the 43rd conference on Computer Applications and Quantitative Methods in Archaeology that took place in Siena (Italy) from March 31st to April 2nd 2015. Altogether, within the four days of the conference 280 papers were presented in 48 sections divided into ten macro topics, 113 posters, 7 roundtables and 12 workshops. That number, in itself, has prompted a thought or two. Above all it says that CAA is very much alive and kicking, that it is in robust good health, and that it remains a wholly relevant force in the scientific community, fully engaged with the questions of the day, and a continuing focal point for the profession. All of that speaks well for the motto of CAA 2015: KEEP THE REVOLUTION GOING. Although the significance of the motto is obvious, it is worth some thoughts. Few would deny that in the past 30 years or so, digital technologies have profoundly revolutionised archaeology - in the office and laboratory, in the field and in the classroom. The progressive introduction of digital techniques in the archaeological process has of course led to a general increase in efficiency. But perhaps more importantly it has provided a spur to the discussion of methodology and through that has strongly influenced not only the way we go about things but also the outcomes that we have been able to achieve. The pioneering phase in the application of digital techniques in archaeological research has clearly been fruitful and today computer applications such as GIS, databases, remote sensing and spatial analysis as well as virtual and cyber archaeology are deeply embedded within our universities. This is all good, of course, but we must not assume that the task has been completed. An intrinsic revolutionary instinct towards technological development has been awakened. But it will only survive by virtue of the results that it brings about. Or using the words of our Chairman Prof Gary Lock: 'Computers not only change the way we do things, but more importantly they change the way we think about what we do and why we do it'. The general thrust of this statement can be summed up and reinforced by recalling a quote from the philosopher Don Ihde, who has argued we should never forget that all technologies should be regarded as 'cultural instruments', which as well as strategies and methodologies implemented in our researches are also 'non-neutral'. So KEEP THE REVOLUTION GOING! is a motto that lays stress on the need to maintain innovation in archaeology through technological advances. But innovation must have at its root the fostering of critical thought and the framing of new archaeological questions. So there is much work still to be done, and fresh challenges to be faced in the months, years and decades ahead. -from the introduction by Stefano Campana and Roberto Scopigno
Download or read book New Geographies written by Stephen Ramos and published by Harvard University Press. This book was released on 2009-09 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Geographies journal aims to examine the emergence of the “geographic,” a new but for the most part latent paradigm in design today—to articulate it and to bring it to bear effectively on the social role of design. Although much of the analysis of this context in architecture, landscape, and urbanism derives from social anthropology, human geography, and economics, the journal aims to extend these arguments to the impact of global changes on the spatial dimension, whether in terms of the emergence of global spatial networks, global cities, or nomadic practices, and how these inform design practices today. Through essays and design projects, the journal aims to identify the relationship between the very small and the very large, and intends to open up discussions on the expanded role of the designer, with an emphasis on disciplinary reframings, repositionings, and attitudes.
Download or read book Diffusion in Solids Liquids Gases written by Wilhelm Jost and published by . This book was released on 1952 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of XXIV Workshop on the Developments in the Italian PhD Research on Food Science Technology and Biotechnology Florence 11 13 September 2019 written by and published by . This book was released on 2019 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Penetrating Radar Theory and Applications written by Harry M. Jol and published by Elsevier. This book was released on 2008-12-08 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground-penetrating radar (GPR) is a rapidly developing field that has seen tremendous progress over the past 15 years. The development of GPR spans aspects of geophysical science, technology, and a wide range of scientific and engineering applications. It is the breadth of applications that has made GPR such a valuable tool in the geophysical consulting and geotechnical engineering industries, has lead to its rapid development, and inspired new areas of research in academia. The topic of GPR has gone from not even being mentioned in geophysical texts ten years ago to being the focus of hundreds of research papers and special issues of journals dedicated to the topic. The explosion of primary literature devoted to GPR technology, theory and applications, has lead to a strong demand for an up-to-date synthesis and overview of this rapidly developing field. Because there are specifics in the utilization of GPR for different applications, a review of the current state of development of the applications along with the fundamental theory is required. This book will provide sufficient detail to allow both practitioners and newcomers to the area of GPR to use it as a handbook and primary research reference. *Review of GPR theory and applications by leaders in the field*Up-to-date information and references*Effective handbook and primary research reference for both experienced practitioners and newcomers
Download or read book Physicochemical Hydrodynamics written by Manual G. Verlarde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1093 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains lecture notes and invited contributions presented at the NATO Advanced Study Institute and EPS Liquid State Conference on PHYSICOCHEMICAL HYDRODYNAMICS-PCH: INTERFACIAL PHENOMENA that were held July 1-15, 1986, in LA RABIDA (Huelva) SPAIN. Although we are aware of the difficulty in organizing the contents due to the broad and multidisciplinary aspects of PCH-Interfacial Phenomena, we have tried to accomodate papers by topics and have not followed the order in the presentation at the meetings. There is also no distinction between the ASI notes and Conference papers. We have done our best to offer a coverage as complete as possible of the field. However, we had difficulties coming from the fact that some authors were so busy that either did not find time to submit their contribution or did not have time to write a comprehensive paper. We also had to cope with very late arrivals, postdeadline valuable contributions that we felt had to be included here. Our gratitude goes to the NATO Scientific Affairs Division for its economic support and to the EPS Liquid State Committee for its sponsorship. Financial support also came from Asociacion Industrias Quimicas-Huelva (Spain), Caycit-Ministerio De Educacion Y Ciencia (Spain), Canon-Espana (Spain), Citibank-Espana (Spain), CNLS-Los Alamos Nat. Lab. (U. S. A. ), CSIC (Spain), EPS, ERT (Spain), ESA, Fotonica (Spain), IBM-Espana (Spain), Junta De Andalucia (Spain), NATO, NSF (U. S. A. ), ONR-London (U. S. A.
Download or read book Fundamentals of Steelmaking written by E. T. Turkdogan and published by Woodhead Publishing Limited. This book was released on 1996 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Turkdogan's book is a welcome, excellent addition to the existing literature on the science of steelmaking. Written by a recognised expert in the field who has participated for many years in the research effort at US Steel, it covers concisely, clearly, and thoroughly a variety of pertinent topics." TZ Kattamis, University of Connecticut Gives engineers, research scientists and graduate students a clear understanding of the operation and control of the pyrometallurgical process. It will also be useful for technical training courses given to steel plant engineers and plant operators.
Download or read book Processes and mechanisms of welding residual stress and distortion written by Zhili Feng and published by CRC Press. This book was released on 2005-11-01 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a fabrication technology, welding presents a number of technical challenges to the designer, manufacturer, and end-user of the welded structures. Both weld residual stress and distortion can significantly impair the performance and reliability of the welded structures. They must be properly dealt with during design, fabrication, and in-service use of the welded structures. There have been many significant and exciting developments on the subject in the past ten to fifteen years. Measurement techniques have been improved significantly. More importantly, the development of computational welding mechanics methods has been phenomenal. The progresses in the last decade or so have not only greatly expanded our fundamental understanding of the processes and mechanisms of residual stress and distortion during welding, but also have provided powerful tools to quantitatively determine the detailed residual stress and distortion information for a given welded structure. New techniques for effective residual stress and distortion mitigations and controls have also been applied in different industry sectors. Processes and Mechanisms of Welding Residual Stress and Distortion provides a comprehensive summary on the developments in the subject. It outlines theoretical treatments on heat transfer, solid mechanics and materials behavior that are essential for understanding and determining the welding residual stress and distortion. The approaches for computational methods and analysis methodology are described so that non specialists can follow them. There are chapters devoted to the discussion of various techniques for control and mitigation of residual stress and distortion, and residual stress and distortion results for various typical welded structures are provided. The second half of the book looks at case studies and practical solutions and provides insights into the techniques, challenges, limitations and future trends of each application. This book will not only be useful for advanced analysis of the subject, but also provide sufficient examples and practical solutions for welding engineers. With a panel of leading experts this authoritative book will be a valuable resource for welding engineers and designers as well as academics working in the fields of structural and mechanical engineering.
