Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Proceedings of the International Field Exploration and Development Conference 2018 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-10-02 with total page 2041 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 8th International Field Exploration and Development Conference (IFEDC 2018) and addresses a broad range of topics, including: Reservoir Surveillance and Management, Reservoir Evaluation and Dynamic Description, Reservoir Production Stimulation and EOR, Ultra-Tight Reservoirs, Unconventional Oil and Gas Resources Technology, Oil and Gas Well Production Testing, and Geomechanics. In brief, the papers introduce readers to upstream technologies used in oil & gas development, the main principles of the process, and various related design technologies. The conference not only provided a platform to exchange experiences, but also promoted the advancement of scientific research in oil & gas exploration and production. The book is chiefly intended for industry experts, professors, researchers, senior engineers, and enterprise managers.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Sand Control written by W. L. Penberthy and published by Society of Petroleum Engineers. This book was released on 1992 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide details a variety of production and completion techniques for controlling sand that are as useful today as when this volume was first published.
Download or read book Risk Analysis for Prevention of Hazardous Situations in Petroleum and Natural Gas Engineering written by Matanovic, Davorin and published by IGI Global. This book was released on 2013-11-30 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: The accelerated growth of the world population creates an increase of energy needs. This requires new paths for oil supply to its users, which can be potential hazardous sources for individuals and the environment. Risk Analysis for Prevention of Hazardous Situations in Petroleum and Natural Gas Engineering explains the potential hazards of petroleum engineering activities, emphasizing risk assessments in drilling, completion, and production, and the gathering, transportation, and storage of hydrocarbons. Designed to aid in decision-making processes for environmental protection, this book is a useful guide for engineers, technicians, and other professionals in the petroleum industry interested in risk analysis for preventing hazardous situations.
Download or read book Advanced Well Completion Engineering written by Wan Renpu and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Production Operations written by Thomas O. Allen and published by . This book was released on 1993 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Gravel Roads written by Ken Skorseth and published by . This book was released on 2000 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. * Course book based on course well completion design by TRACS International * Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world. * Full colour
Download or read book Handbook of Suggested Practices for the Design and Installation of Ground water Monitoring Wells written by Linda Aller and published by . This book was released on 1991 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Maritime Technology 4 0 written by Prof. MSP. Raju and published by Archers & Elevators Publishing House. This book was released on with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Offshore Well Completion and Stimulation written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2019-05-08 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the public is generally aware of the use of hydraulic fracturing for unconventional resource development onshore, it is less familiar with the well completion and stimulation technologies used in offshore operations, including hydraulic fracturing, gravel packs, "fracpacks," and acid stimulation. Just as onshore technologies have improved, these well completion and stimulation technologies for offshore hydrocarbon resource development have progressed over many decades. To increase public understanding of these technologies, the National Academies of Sciences, Engineering, and Medicine established a planning committee to organize and convene a workshop on Offshore Well Completion and Stimulation: Using Hydraulic Fracturing and Other Technologies on October 2-3, 2017, in Washington, DC. This workshop examined the unique features about operating in the U.S. offshore environment, including well completion and stimulation technologies, environmental considerations and concerns, and health and safety management. Participants from across government, industry, academia, and nonprofit sectors shared their perspectives on operational and regulatory approaches to mitigating risks to the environment and to humans in the development of offshore resources. This publication summarizes the presentations and discussions from the workshop.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1989 with total page 878 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Field Exploration and Development Conference 2023 written by Jia’en Lin and published by Springer Nature. This book was released on with total page 1909 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reservoir Formation Damage written by Faruk Civan and published by Gulf Professional Publishing. This book was released on 2023-04-07 with total page 1097 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage: Fundamentals, Modeling, Assessment, and Mitigation, Fourth Edition gives engineers a structured layout to predict and improve productivity, providing strategies, recent developments and methods for more successful operations. Updated with many new chapters, including completion damage effects for fractured wells, flow assurance, and fluid damage effects, the book will help engineers better tackle today’s assets. Additional new chapters include bacterial induced formation damage, new aspects of chemically induced formation damage, and new field application designs and cost assessments for measures and strategies. Additional procedures for unconventional reservoirs get the engineer up to date. Structured to progress through your career, Reservoir Formation Damage, Fourth Edition continues to deliver a trusted source for both petroleum and reservoir engineers. Covers new applications through case studies and test questions Bridges theory and practice, with detailed illustrations and a structured progression of chapter topics Considers environmental aspects, with new content on water control, conformance and produced water reinjection
