Download or read book Sand Control and Gravel Packing Techniques written by Khosrow M. Hadipour and published by Xlibris Corporation. This book was released on 2019-05-09 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introductory reference guide to oil well sand-control and gravel-packing techniques in the oil and gas field. The book examines the common techniques of controlling formation of sand and solids from entering into a wellbore. The author introduces the reader to the tools, equipment, and application methods of sand control and gravel packing. It also talks about the safety precautions one must take during the process. This work may appeal to readers who are interested in oil and gas field techniques.
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Hydraulic Proppant Fracturing and Gravel Packing written by D. Mader and published by Elsevier. This book was released on 1989-03-01 with total page 1277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many aspects of hydraulic proppant fracturing have changed since its innovation in 1947. The main significance of this book is its combination of technical and economical aspects to provide an integrated overview of the various applications of proppants in hydraulic fracturing, and gravel in sand control. The monitoring of fractures and gravel packs by well-logging and seismic techniques is also included.The book's extensive coverage of the subject should be of special interest to reservoir geologists and engineers, production engineers and technologists, and well log analysts.
Download or read book Hydraulic Proppant Fracturing and Gravel Packing written by Detlef Mader and published by Elsevier Science Limited. This book was released on 1989-01-01 with total page 1239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many aspects of hydraulic proppant fracturing have changed since its innovation in 1947. The main significance of this book is its combination of technical and economical aspects to provide an integrated overview of the various applications of proppants in hydraulic fracturing, and gravel in sand control. The monitoring of fractures and gravel packs by well-logging and seismic techniques is also included. The book's extensive coverage of the subject should be of special interest to reservoir geologists and engineers, production engineers and technologists, and well log analysts.
Download or read book Reservoir Formation Damage written by Faruk Civan and published by Elsevier. This book was released on 2011-08-30 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reservoir Formation Damage, Second edition is a comprehensive treatise of the theory and modeling of common formation damage problems and is an important guide for research and development, laboratory testing for diagnosis and effective treatment, and tailor-fit- design of optimal strategies for mitigation of reservoir formation damage. The new edition includes field case histories and simulated scenarios demonstrating the consequences of formation damage in petroleum reservoirsFaruk Civan, Ph.D., is an Alumni Chair Professor in the Mewbourne School of Petroleum and Geological Engineering at the University of Oklahoma in Norman. Dr. Civan has received numerous honors and awards, including five distinguished lectureship awards and the 2003 SPE Distinguished Achievement Award for Petroleum Engineering Faculty. - Petroleum engineers and managers get critical material on evaluation, prevention, and remediation of formation damage which can save or cost millions in profits from a mechanistic point of view - State-of-the-Art knowledge and valuable insights into the nature of processes and operational practices causing formation damage - Provides new strategies designed to minimize the impact of and avoid formation damage in petroleum reservoirs with the newest drilling, monitoring, and detection techniques
Download or read book Sand Control written by W. L. Penberthy and published by Society of Petroleum Engineers. This book was released on 1992 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide details a variety of production and completion techniques for controlling sand that are as useful today as when this volume was first published.
Download or read book Handbook of Hydraulic Fracturing written by James G. Speight and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an up-to-date description of current and new hydraulic fracturing processes Details Emerging Technologies such as Fracture Treatment Design, Open Hole Fracturing, Screenless Completions, Sand Control, Fracturing Completions and Productivity Covers Environmental Impact issues including Geological Disturbance; Chemicals used in Fracturing; General Chemicals; Toxic Chemicals; and Air, Water, Land, and Health impacts Provides many process diagrams as well as tables of feedstocks and their respective products
Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Sand Control written by Society of Petroleum Engineers (U.S.) and published by . This book was released on 1996 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Giant Micelles written by Raoul Zana and published by CRC Press. This book was released on 2007-05-30 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: The co-evolution of a strong theoretical framework alongside application of a range of sophisticated experimental tools engendered rapid advancement in the study ofgiant micelles. Beginning with Anacker and Debye's 1951 experimental study of elongated micelles by light scattering and their subsequent theoretical inference that the thermodynamic
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Subsea Engineering Handbook written by Yong Bai and published by Gulf Professional Publishing. This book was released on 2018-11-15 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offshore industry continues to drive the oil and gas market into deeper drilling depths, more advanced subsea systems, and cross into multiple disciplines to further technology and equipment. Engineers and managers have learned that in order to keep up with the evolving market, they must have an all-inclusive solution reference. Subsea Engineering Handbook, Second Edition remains the go-to source for everything related to offshore oil and gas engineering. Enhanced with new information spanning control systems, equipment QRA, electric tree structures, and manifold designs, this reference is still the one product engineers rely on to understand all components of subsea technology. Packed with new chapters on subsea processing and boosting equipment as well as coverage on newer valves and actuators, this handbook explains subsea challenges and discussions in a well-organized manner for both new and veteran engineers to utilize throughout their careers. Subsea Engineering Handbook, Second Edition remains the critical road map to understand all subsea equipment and technology. - Gain access to the entire spectrum of subsea engineering, including the very latest on equipment, safety, and flow assurance systems - Sharpen your knowledge with new content coverage on subsea valves and actuators, multiphase flow loop design, tree and manifold design as well as subsea control - Practice and learn with new real-world test examples and case studies
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Download or read book Surface Operations in Petroleum Production II written by J.O. Robertson and published by Elsevier. This book was released on 1989-07-01 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of Surface Operations in Petroleum Production complements and amplifies Volume I which appeared in 1987 and covered several aspects of oilfield technology. This second volume presents a detailed theoretical and practical exposition of surface oilfield practices, including gas flow rate measurement, cementing, fracturing, acidizing, and gravel packing. In today's era of specialization, these operations are generally left to service companies, denying field engineers and company managers direct detailed knowledge of the specific surface and subsurface operations. This book presents a comprehensive analysis which may be used by field engineers to analyze technical problems, specify the required surface and subsurface operations, and closely supervise the service company's work and post-treatment operation of the well.Another subject which has great economic consequences in all oilfields is corrosion of equipment. The book presents a comprehensive analysis of the theory of corrosion in the oilfield and methods that have proved effective for the retardation, or elimination, of corrosion. Quality control of injection waters in then covered. Three more topics are addressed: the first is offshore technology which is presented with reference to onshore oilfield operations, making a lucid presentation for field engineers who have no practical knowledge of the subject. The second is pollution control - an area of oilfield management which has assumed widespread importance in recent years. The last topic covered is the subject of underground storage of gas and oil. Underground fuel storage and retrieval is an active area of oilfield production management that utilizes the technology presented in this entire treatise. Finally, the technology of testing petroleum products and sample experiments for junior and senior petroleum engineering students are presented.This two-volume comprehensive treatise on modern oilfield technology thus provides not only a complete reference for field managers, engineers, and technical consultants, but will also serve academic needs in advanced studies of petroleum production engineering.
Download or read book Coil tubing unit for oil production and remedial measures written by Mohammed Ismail Iqbal and published by CRC Press. This book was released on 2022-09-01 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Well activation is one of the most important aspects in the oil and gas industries and nitrogen gas is predominately used. The gas, being light, is sent down the producing reservoir which will enhance the production or improve the flow of crude oil. In addition to the methods used to increase production there are several problems like sand production and water production from the producing wells. Sand production occurs when the destabilizing stresses at the formation face exceed the strength of the natural arching tendencies and/or grain-to-grain cementation strength. Ideally, during oil production, the formation should be porous, permeable and well consolidated through which hydrocarbons can easily flow into the production wells. But sometimes, especially during production from unconsolidated sandstone reservoirs, the produced hydrocarbons may also carry large amounts of sand into the well bore and sand entering production wells is one of the oldest problems faced by oil companies and one of the toughest to solve. These unconsolidated formations may not restrain grain movement, and produce sand along with the fluids especially at high rates. Water production is also a problem that many reservoir or production engineers face in day-to-day life. As engineers we should be able to decide whether water control solutions should be applied or not. The excess production of water is caused by the depletion of the reservoir and simply sweeps away most of the oil that the reservoir can produce. This book gives an information how well activation using nitrogen is carried out, and how sand control and water control issues can be resolved.
Download or read book Fossil Energy Update written by and published by . This book was released on 1977 with total page 748 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Field Exploration and Development Conference 2018 written by Jia'en Lin and published by Springer Nature. This book was released on 2019-10-02 with total page 2063 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the 8th International Field Exploration and Development Conference (IFEDC 2018) and addresses a broad range of topics, including: Reservoir Surveillance and Management, Reservoir Evaluation and Dynamic Description, Reservoir Production Stimulation and EOR, Ultra-Tight Reservoirs, Unconventional Oil and Gas Resources Technology, Oil and Gas Well Production Testing, and Geomechanics. In brief, the papers introduce readers to upstream technologies used in oil & gas development, the main principles of the process, and various related design technologies. The conference not only provided a platform to exchange experiences, but also promoted the advancement of scientific research in oil & gas exploration and production. The book is chiefly intended for industry experts, professors, researchers, senior engineers, and enterprise managers.
