Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-22 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Geomechanics of Sand Production and Sand Control written by Nobuo Morita and published by Gulf Professional Publishing. This book was released on 2022-06-29 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geomechanics of Sand Production and Control delivers a convenient resource for both academia and professionals to gain understanding and results surrounding sand production. Packed with rock mechanic fundamentals and field case studies, this reference offers theoretical knowledge, field and laboratory data, and operational methodologies. Gaining knowledge on better sand control production improves environmental impact, preventing corrosion of pipes, damage to surface production facilities, and disposal of produced sands, among other considerations. Sections are supported by field case studies, lab tests and modeling studies to explain the most environmentally supportive wellbore stability step-by-step methods. Authored by a very experienced professor, this reference helps engineers learn how to solve sand problems in various types of energy wells. Production engineers in oil and gas utilize sand production and sand control equipment in many completion methods, with a growing interest to expand these methods in wells for CO2 sequestration and geothermal areas, but knowledge on these methods is fragmented and lacks a bridge to support energy transition. This book provides the coverage needed to address this advancing field. - Includes visual graphs derived from real-world fields and numerical models - Covers transition methods into other energy assets, including CO2 sequestration and geothermal wells - Provides solutions and examples with the inclusion of real field case studies
Download or read book Advances in Energy Environment and Chemical Engineering Volume 1 written by Ahmad Zuhairi Abdullah and published by CRC Press. This book was released on 2022-12-21 with total page 848 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Energy, Environment and Chemical Engineering collects papers resulting from the conference on Energy, Environment and Chemical Engineering (AEECE 2022), Dali, China, 24-26 June, 2022. The primary goal is to promote research and developmental activities in energy technology, environment engineering and chemical engineering. Moreover, it aims to promote scientific information interchange between scholars from the top universities, business associations, research centers and high-tech enterprises working all around the world. The conference conducts in-depth exchanges and discussions on relevant topics such as energy engineering, environment technology and advanced chemical technology, aiming to provide an academic and technical communication platform for scholars and engineers engaged in scientific research and engineering practice in the field of saving technologies, environmental chemistry, clean production and so on. By sharing the research status of scientific research achievements and cutting-edge technologies, it helps scholars and engineers all over the world comprehend the academic development trend and broaden research ideas. So as to strengthen international academic research, academic topics exchange and discussion, and promote the industrialization cooperation of academic achievements.
Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Integrated Sand Management For Effective Hydrocarbon Flow Assurance written by and published by Newnes. This book was released on 2015-06-15 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Handbook provides solutions to the fundamental issues associated with wells and reservoirs experiencing sanding problems, especially in deepwater environments. Sand Management is a massive challenge for the petroleum industry as it extends its exploration activities to new frontiers. Challenging ultra deepwater, High Pressure-High Temperature (HP-HT) and Arctic environments require engineers to drill more complex wells and manage more complex reservoirs, the majority of which are prone to massive sand production. Covering such fundamentals as how to maximize individual wells and field development performance, as well as how to minimize operational cost, non-productive time and guarantee flow assurance across the entire composite production system from reservoirs through the wellbore to the topside and flow lines, this handbook explains that the biggest challenge facing operators is the shortage of sand management personnel and helps companies realize the value of their assets. - Reference for knowledge transfer and skills development in sand management for effective flow assurance - Emphasis on HP-HT and deepwater environments - Meets the needs of new and practising engineers alike as well as non-technical personnel supporting the offshore industry
Download or read book Offshore Pipelines written by Boyun Guo and published by Elsevier. This book was released on 2005-04-25 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offshore Pipelines covers the full scope of pipeline development from pipeline designing, installing, and testing to operating. It gathers the authors' experiences gained through years of designing, installing, testing, and operating submarine pipelines. The aim is to provide engineers and management personnel a guideline to achieve cost-effective management in their offshore and deepwater pipeline development and operations. The book is organized into three parts. Part I presents design practices used in developing submarine oil and gas pipelines and risers. Contents of this part include selection of pipe size, coating, and insulation. Part II provides guidelines for pipeline installations. It focuses on controlling bending stresses and pipe stability during laying pipelines. Part III deals with problems that occur during pipeline operations. Topics covered include pipeline testing and commissioning, flow assurance engineering, and pigging operations. This book is written primarily for new and experienced engineers and management personnel who work on oil and gas pipelines in offshore and deepwater. It can also be used as a reference for college students of undergraduate and graduate levels in Ocean Engineering, Mechanical Engineering, and Petroleum Engineering.* Pipeline design engineers will learn how to design low-cost pipelines allowing long-term operability and safety.* Pipeline operation engineers and management personnel will learn how to operate their pipeline systems in a cost effective manner.* Deepwater pipelining is a new technology developed in the past ten years and growing quickly.
Download or read book Production Chemicals for the Oil and Gas Industry written by Malcolm A. Kelland and published by CRC Press. This book was released on 2016-04-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern production methods and environmental constraints demand chemical solutions. And as oilfields age, the need for chemicals to ensure steady production increases. Production Chemicals for the Oil and Gas Industry describes classes of production chemicals for use topside and downhole in the upstream oil and gas industry. It includes coverage of
Download or read book Proceedings of the International Field Exploration and Development Conference 2021 written by Jia'en Lin and published by Springer Nature. This book was released on 2022-09-07 with total page 5829 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on reservoir surveillance and management, reservoir evaluation and dynamic description, reservoir production stimulation and EOR, ultra-tight reservoir, unconventional oil and gas resources technology, oil and gas well production testing, and geomechanics. This book is a compilation of selected papers from the 11th International Field Exploration and Development Conference (IFEDC 2021). The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers, senior engineers as well as professional students.
Download or read book Proceedings of the International Field Exploration and Development Conference 2022 written by Jia'en Lin and published by Springer Nature. This book was released on 2023-08-05 with total page 7600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on reservoir surveillance and management, reservoir evaluation and dynamic description, reservoir production stimulation and EOR, ultra-tight reservoir, unconventional oil and gas resources technology, oil and gas well production testing, and geomechanics. This book is a compilation of selected papers from the 12th International Field Exploration and Development Conference (IFEDC 2022). The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers, senior engineers as well as professional students.
Download or read book Proceedings of the International Field Exploration and Development Conference 2020 written by Jia'en Lin and published by Springer Nature. This book was released on 2021-06-17 with total page 3487 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 10th International Field Exploration and Development Conference (IFEDC 2020). The proceedings focuses on Reservoir Surveillance and Management, Reservoir Evaluation and Dynamic Description, Reservoir Production Stimulation and EOR, Ultra-Tight Reservoir, Unconventional Oil and Gas Resources Technology, Oil and Gas Well Production Testing, Geomechanics. The conference not only provides a platform to exchanges experience, but also promotes the development of scientific research in oil & gas exploration and production. The main audience for the work includes reservoir engineer, geological engineer, enterprise managers senior engineers as well as professional students.
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Download or read book Surface Operations in Petroleum Production II written by J.O. Robertson and published by Elsevier. This book was released on 1989-07-01 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second volume of Surface Operations in Petroleum Production complements and amplifies Volume I which appeared in 1987 and covered several aspects of oilfield technology. This second volume presents a detailed theoretical and practical exposition of surface oilfield practices, including gas flow rate measurement, cementing, fracturing, acidizing, and gravel packing. In today's era of specialization, these operations are generally left to service companies, denying field engineers and company managers direct detailed knowledge of the specific surface and subsurface operations. This book presents a comprehensive analysis which may be used by field engineers to analyze technical problems, specify the required surface and subsurface operations, and closely supervise the service company's work and post-treatment operation of the well.Another subject which has great economic consequences in all oilfields is corrosion of equipment. The book presents a comprehensive analysis of the theory of corrosion in the oilfield and methods that have proved effective for the retardation, or elimination, of corrosion. Quality control of injection waters in then covered. Three more topics are addressed: the first is offshore technology which is presented with reference to onshore oilfield operations, making a lucid presentation for field engineers who have no practical knowledge of the subject. The second is pollution control - an area of oilfield management which has assumed widespread importance in recent years. The last topic covered is the subject of underground storage of gas and oil. Underground fuel storage and retrieval is an active area of oilfield production management that utilizes the technology presented in this entire treatise. Finally, the technology of testing petroleum products and sample experiments for junior and senior petroleum engineering students are presented.This two-volume comprehensive treatise on modern oilfield technology thus provides not only a complete reference for field managers, engineers, and technical consultants, but will also serve academic needs in advanced studies of petroleum production engineering.
Download or read book Petroleum Related Rock Mechanics written by E. Fjær and published by Elsevier. This book was released on 1992-01-03 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This long-awaited volume, written specifically for petroleum workers, explores the fundamental concepts of rock mechanics along with various petroleum-related applications. Emphasis is placed on the weak sedimentary rocks which normally fall between traditional rock mechanics and soil mechanics. Elasticity, failure mechanics, acoustic wave propagation, and geological aspects of rock materials are all detailed. Application areas discussed include: stability during drilling, sand production, fracturing and reservoir compaction. Methods for acquisition of data from field and laboratory analyses are also described.Engineers and geologists in the petroleum industry will find this book a powerful resource in providing a basis of rock mechanical knowledge - a knowledge which can greatly assist in the understanding of field behaviour, design of test programmes and the design of field operations.
Download or read book Flow Assurance written by Qiwei Wang and published by Gulf Professional Publishing. This book was released on 2022-06-25 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineers search through endless sources to understand oil and gas chemicals, find problems, and discover solutions while operations are becoming more unconventional and driving towards more sustainable practices. The Oil and Gas Chemistry Management Series brings an all-inclusive suite of tools to cover all the sectors of oil and gas chemicals from drilling to production, processing, storage, and transportation. The second reference in the series, Flow Assurance, delivers the critical chemical oilfield basics while also covering latest research developments and practical solutions. Organized by the type of problems and mitigation methods, this reference allows the engineer to fully understand how to effectively control chemistry issues, make sound decisions, and mitigate challenges ahead. Basics include root cause, model prediction and laboratory simulation of the major chemistry related challenges during oil and gas productions, while more advanced discussions cover the chemical and non-chemical mitigation strategies for more efficient, safe and sustainable operations. Supported by a list of contributing experts from both academia and industry, Flow Assurance brings a necessary reference to bridge petroleum chemistry operations from theory into safer and cost-effective practical applications. - Offers full range of oilfield production chemistry issues, including chapters focused on hydrate and organic deposition control, liquid blockage mitigation, and abiotic and microbially influenced corrosion prevention - Gain effective control on problems and mitigation strategies from industry list of experts and contributors - Delivers both up to date research developments and practical applications, bridging between theory and practice
Download or read book Proceedings of the 2022 International Petroleum and Petrochemical Technology Conference written by Jia'en Lin and published by Springer Nature. This book was released on 2023-05-10 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of selected papers from the 6th International Petroleum and Petrochemical Technology Conference (IPPTC 2022). The work focuses on petroleum & petrochemical technologies and practical challenges in the field. It creates a platform to bridge the knowledge gap between China and the world. The conference not only provides a platform to exchanges experience but also promotes the development of scientific research in petroleum & petrochemical technologies. The book will benefit a broad readership, including industry experts, researchers, educators, senior engineers and managers.
Download or read book Proceedings of the International Field Exploration and Development Conference 2023 written by Jia’en Lin and published by Springer Nature. This book was released on with total page 1421 pages. Available in PDF, EPUB and Kindle. Book excerpt:
