Download or read book Safety of Reactive Chemicals and Pyrotechnics written by Y. Wada and published by Elsevier. This book was released on 1995-11-20 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accidents involving reactive chemicals can often be prevented, or their effects alleviated, if those handling them have a sound knowledge both of their hazardous properties and of appropriate handling methods. This book addresses this need. It opens with a definition of the key technical terms and evaluation methods for hazardous materials are outlined. Chapter 2 covers accidents involving self-reactive substances, accidents occurring during chemical reactions, and accidents involving hazardous products in the event of an earthquake. In the next three chapters, methods for evaluating fire and explosion hazards of reactive substances are covered. The test methods described include DSC test using a sealed cell, impact sensitivity tests, the ignitability test, burning tests, the pyrolytic severity test, and shock sensitivity tests. Recently, the Japanese Fire Services Law was amended, requiring hazardous materials to be evaluated and classified by appropriate tests. These test methods, described in chapter 4, are related to oxidising solids, combustible solids, spontaneous ignition substances, and water-reactive substances. The final chapter gives examples of the safety assessment of various pyrotechnics. There are few books available on this subject and none so comprehensive. Each of the methods described is practical, effective and of low cost; and many of the application results are from the author's own laboratory. The book will be invaluable to those in public and industrial safety laboratories, R & D chemical laboratories, Fire Departments, explosives manufacturers, and those responsible for the transportation of hazardous materials.
Download or read book Safety of Reactive Chemicals written by Tadao Yoshida and published by . This book was released on 1987 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guidelines for Safe Storage and Handling of Reactive Materials written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and growing interest in dealing with the hazards of reactive chemicals, this book offers guidelines that can significantly reduce the risk or mitigate the severity of accidents associated with storing and handling reactive materials. Necessary elements of a reliable system to prevent equipment or human failures that might lead to a reactive chemical incident are sound and responsible management policies, together with a combination of superior siting, design, fabrication, erection, inspection, monitoring, maintenance, operations and maintenance of facilities. These Guidelines deal with all of these elements with emphasis on design considerations.
Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Peter Urben and published by Elsevier. This book was released on 2017-03-18 with total page 1522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bretherick's Handbook of Reactive Chemical Hazards, Eighth Edition presents the latest updates on the unexpected, but predictable, loss of containment and explosion hazards from chemicals and their admixtures and actual accidents. The extensively cross-referenced book enables readers to avoid explosion and loss of containment of chemicals. Primary and more specialized sources are easily traced, and this new edition includes available record updates, also adding a number of new records. In this newly updated and expanded edition, the content is presented in a clear and user-friendly format. Includes new pure compound/class of compounds records and updates on all existing records Presents a worldwide unique reference work on chemical reactive hazards Lists important hazardous reactions and includes references to real chemical incidents Provides guidelines on the safe use and handling of chemicals In the lab and industry
Download or read book Essential Practices for Managing Chemical Reactivity Hazards written by Robert W. Johnson and published by John Wiley & Sons. This book was released on 2010-08-13 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: In its recent investigation of chemical reactivity accidents, the US Chemical Safety Board noted a gap in technical guidance and regulatory coverage. This volume closes the gap in technical guidance, helping small and large companies alike identify, address, and manage chemical reactivity hazards. It guides the reader through an analysis of the potential for chemical reactivity accidents to help prevent fires, explosions, toxic chemical releases or chemical spills. This volume is applicable to processes at any scale and is particularly useful for chemists, safety managers, and engineers involved in scale-up. An enclosed CD-ROM provides portable checklists, analysis tools, and a list of additional references. Note: CD-ROM/DVD and other supplementary materials are not included as part of eBook file.
Download or read book Bretherick s Handbook of Reactive Chemical Hazards written by Martin John Pitt and published by Academic Press. This book was released on 2007 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an assembly of all reported risks such as explosion, fire, toxic or high-energy events that result from chemical reactions gone astray, with extensive referencing to the primary literature. Entries are ordered by empirical formula and indexed under both name(s) and Chemical Abstracts Registry Numbers. Toxicity hazards are only included for unexpected reactions giving volatile poisons.
Download or read book Fire and Explosion Hazards Handbook of Industrial Chemicals written by Tatyana Davletshina and published by . This book was released on 1998 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The handbook provides ready information on the fire and chemical reactivity of commonly used chemicals. Its purpose is to provide basic information important to the safe handling of chemicals and to help provide guidance in responding to a hazardous materials incident, in particular, incidents involving reactive chemicals and materials posing fire and explosion hazards. The volume has been written for chemical handling specialists, first responders to hazardous materials incidents, and firefighters. The basic definition used for a hazard materials incident is any situation that may potentiall.
Download or read book Explosives written by Rudolf Meyer and published by John Wiley & Sons. This book was released on 2008-02-08 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This world-famous work has been enlarged and updated without tampering with its tried and tested format. Around 500 alphabetically ordered, monographic entries consider the physicochemical properties, production methods and safe applications of over 120 explosive chemicals, while discussing 70 fuels, additives and oxidizing agents and describing the relevant test methods. The extensive thermodynamic data has been thoroughly updated and now also provided on a CD-ROM compiled by the Fraunhofer Institute of Chemical Technology. This excerpt from the ICT Thermodynamical Database not only includes additional thermodynamic data, and references to further reading, but also features enhanced search facilities. Other key features include a 1,500-entry combined index and glossary with terms and abbreviations in English, French and German, conversion tables and numerous literature references. A handy reference for explosive experts and also for translators, public authorities and patent lawyers. From reviews of previous editions: '... This wealth of information and an index that comprises some 1500 keywords and several conversion tables make this a unique source of knowledge for anybody working with explosives.' (Propellants, Explosives, Pyrotechnics)
Download or read book Handbook for Process Safety in Laboratories and Pilot Plants written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2023-08-29 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook for Process Safety in Laboratories and Pilot Plants Effectively manage physical and chemical risks in your laboratory or pilot plant In Handbook for Process Safety in Laboratories and Pilot Plants: A Risk-based Approach, the Center for Chemical Process Safety delivers a comprehensive and authoritative presentation of process safety procedures and methods for use in laboratories and pilot plants (LAPPs). Of the four broad hazard categories — chemical, physical, biological, and ionizing radiation — this book focuses on the two most common: chemical and physical hazards. It addresses the storage and handling of the hazardous materials associated with activities commonly performed in LAPPs and presents many of the physical and chemical analytical techniques used to verify and validate the efficacy of safety management systems. This book will present tools and techniques for effectively managing the risks in any laboratory or pilot plant using engineered and administrative controls, as well as the CCPS Risk Based Process Safety (RBPS) Management Systems. Readers will also find: A thorough introduction to process safety Comprehensive explorations of understanding hazards and risks, as well as managing risk with engineered controls, administrative controls, and RBPS Management Systems Practical discussions of how to learn from the experiences of your own LAPP and others Detailed case reports and examples, as well as practical tools, control banding strategies, and glass equipment design Perfect for any LAPP staff member working with or managing hazardous materials, Handbook for Process Safety in Laboratories and Pilot Plants: A Risk-based Approach will also benefit LAPP engineering and scientific professionals, LAPP technical support staff, and LAPP managers. The Center for Chemical Process Safety is a world leader in developing and distributing information on process safety management and technology. Since 1985, CCPS has published over 100 books in its process safety guidelines and concept series, 33 training modules as part of its Safety in Chemical Engineering Education series, and over 220 online offerings.
Download or read book Critical Temperatures for the Thermal Explosion of Chemicals written by Takashi Kotoyori and published by Elsevier. This book was released on 2011-08-30 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: The value of the critical temperature (Tc), below which the thermal explosion of a chemical cannot occur, is indispensable to prevent such a chemical from exploding. In order to determine the Tc it has so far been necessary to measure the value in explosion experiments. Because of the inherent hazards, only few Tc values are available at present. Critical Temperatures for the Thermal Explosion of Chemicals introduces new and simple procedures to calculate the Tc. As a result Tc can be calculated for a range of chemicals, many of which are listed in this new volume. The calculated values of Tc are shown to be in agreement with experimentally determined values. The data and methods presented in Critical Temperatures for the Thermal Explosion of Chemicals will be of use to research laboratories as well as in the chemical industry. Introduces new and simple procedures for calculating critical temperatures Lists the T(c) values of chemicals in tables Explains mathematical expressions in clear simple terms
Download or read book Guidelines for Safe Storage and Handling of Reactive Materials written by and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: With new and growing interest in dealing with the hazards of reactive chemicals, this book offers guidelines that can significantly reduce the risk or mitigate the severity of accidents associated with storing and handling reactive materials. Necessary elements of a reliable system to prevent equipment or human failures that might lead to a reactive chemical incident are sound and responsible management policies, together with a combination of superior siting, design, fabrication, erection, inspection, monitoring, maintenance, operations and maintenance of facilities. These Guidelines deal with all of these elements with emphasis on design considerations.
Download or read book Selected Pyrotechnic Publications of K L and B J Kosanke Part 2 written by Kenneth L. Kosanke and published by Journal of Pyrotechnics. This book was released on 1995-09 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: These are a collection of previously published technical papers on a variety of pyrotechnic topics. The articles have been reformatted into a 2-column, 81⁄2x11" format with medium print. Only those articles that continue to be of interest and use to pyrotechnicians have been included.
Download or read book Process Safety Management written by U.S. Department of Labor and published by CreateSpace. This book was released on 2014-03-19 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unexpected releases of toxic, reactive, or flammable liquids and gases in processes involving highly hazardous chemicals have been reported for many years. Incidents continue to occur in various industries that use highly hazardous chemicals which may be toxic, reactive, flammable, or explosive, or may exhibit a combination of these properties. Regardless of the industry that uses these highly hazardous chemicals, there is a potential for an accidental release any time they are not properly controlled. This, in turn, creates the possibility of disaster. Although these major disasters involving highly hazardous chemicals drew national attention to the potential for major catastrophes, the public record is replete with information concerning many other less notable releases of highly hazardous chemicals. Hazardous chemical releases continue to pose a significant threat to employees and provide impetus, internationally and nationally, for authorities to develop or consider developing legislation and regulations to eliminate or minimize the potential for such events. This booklet summarizes the OSHA final process safety management (PSM) standard. Employers and employees may prefer to read this booklet and a companion one entitled, “Process Safety Management - Guidelines for Compliance” (OSHA 3133), before studying the rule itself. The standard mainly applies to manufacturing industries—particularly, those pertaining to chemicals, transportation equipment, and fabricated metal products. Other affected sectors include natural gas liquids; farm product warehousing; electric, gas, and sanitary services; and wholesale trade. It also applies to pyrotechnics and explosives manufacturers covered under other OSHA rules and has special provisions for contractors working in covered facilities.
Download or read book Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants written by Joaquim Casal and published by Elsevier. This book was released on 2007-12-08 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Evaluation of the Effects and Consequences of Major Accidents in Industrial Plants analyzes the different major accidents which can occur in process plants and during the transportation of hazardous materials. The main features of fires, explosions and toxic releases are discussed, and a set of mathematical models allowing the prediction of their effects and consequences are explained. With a practical approach, the models are applied to simple illustrative examples, as well as to more complex real cases. The use of these calculations in the frame of Quantitative Risk Analysis is also treated. Evaluation of the effects of major accidents in industrial installations covers the following topics: general introduction, source term, fire accidents, vapour cloud explosions, BLEVEs and vessel explosions, atmospheric dispersion of toxic or flammable clouds, vulnerability, and quantitative risk analysis. This book is a useful tool for engineering professionals, as well as an interesting reference for teaching at graduate and post-graduate levels. Both the essential aspects and the calculations related to the diverse accidents are discussed The prediction of effects and consequences is performed with a practical approach Recent contributions from literature have been included Subjects of increasing importance have been included: an extense analysis of BLEVEs, for example, or the atmospheric dispersion of pathogenic agents
Download or read book Risk Assessment and Management in the Context of the Seveso II Directive written by Michalis D Christou and published by Elsevier. This book was released on 1998-02-18 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: The assessment and management of risk to society from the operation of chemical process plants and other industrial activities in which dangerous substances are produced, used, handled or stored will remain a topic of great importance in the next decade. In order to evaluate this specific risk on a qualitative and/or quantitative basis, the concepts of risk analyses are linked together in this book. The "performance based" and "goal oriented" regulatory requirements of the European Council's new "Seveso II Directive" for the identification of large scale industrial hazards, prevention of sudden and uncontrolled releases of dangerous substances from industrial plants and mitigation of serious consequences of industrial accidents to people and the environment are examined. The fact that risk assessment and management are key elements to such forms of regulation is also demonstrated. While the "Seveso II Directive" defines "what" has to be achieved on the control of major hazards involving dangerous substances within the European Union, the methods of risk assessment and management give guidance on "how" to achieve it. The text provides a practical guide for decision-makers in regulatory bodies and companies with a non-technical background. Scientists and engineers who are not yet familiar with the concepts of risk assessment and who want a survey of some fundamentals of, and principal results from, risk assessment studies and approaches primarily for applications in the context defined by the "Seveso Directives" will also find this book invaluable.
Download or read book Earthquake Engineering Handbook written by Charles Scawthorn and published by CRC Press. This book was released on 2002-09-27 with total page 1508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquakes are nearly unique among natural phenomena - they affect virtually everything within a region, from massive buildings and bridges, down to the furnishings within a home. Successful earthquake engineering therefore requires a broad background in subjects, ranging from the geologic causes and effects of earthquakes to understanding the imp
Download or read book Pyrotechnics written by Joseph Howard McLain and published by . This book was released on 1980 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:
