Download or read book Safety Issues for Advanced Protection Control and Human machine Interface Systems in Operating Nuclear Power Plants written by Iaea Staff and published by . This book was released on 1998 with total page 61 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain information on the practical methods that can be used to ensure safety and protection in peaceful activities involving radiation or radioactive materials. Covering such topics as: nuclear installations, nuclear fuel cycle activities, transport of radioactive material, radiation protection and safety for workers and the public, medical aspects, emergency preparedness, accident response and recovery, radioactive waste management, safety assessment and environmental impact, this series is particularly notable for its descriptive titles.
Download or read book Digital Instrumentation and Control Systems in Nuclear Power Plants written by Committee on Application of Digital Instrumentation and Control Systems to Nuclear Power Plant Operations and Safety and published by National Academies Press. This book was released on 1997-05-02 with total page 127 pages. Available in PDF, EPUB and Kindle. Book excerpt: The nuclear industry and the U.S. Nuclear Regulatory Commission (USNRC) have been working for several years on the development of an adequate process to guide the replacement of aging analog monitoring and control instrumentation in nuclear power plants with modern digital instrumentation without introducing off-setting safety problems. This book identifies criteria for the USNRC's review and acceptance of digital applications in nuclear power plants. It focuses on eight areas: software quality assurance, common-mode software failure potential, systems aspects of digital instrumentation and control technology, human factors and human-machine interfaces, safety and reliability assessment methods, dedication of commercial off-the-shelf hardware and software, the case-by-case licensing process, and the adequacy of technical infrastructure.
Download or read book Progress of Nuclear Safety for Symbiosis and Sustainability written by Hidekazu Yoshikawa and published by Springer Science & Business Media. This book was released on 2014-03-20 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces advanced methods of computational and information systems allowing readers to better understand the state-of-the-art design and implementation technology needed to maintain and enhance the safe operation of nuclear power plants. The subjects dealt with in the book are (i) Full digital instrumentation and control systems and human–machine interface technologies (ii) Risk monitoring methods for large and complex plants (iii) Condition monitors for plant components (iv) Virtual and augmented reality for nuclear power plants and (v) Software reliability verification and validation for nuclear power plants. The target readers of this book are Ph.D. students, researchers and engineers in the field of nuclear power engineering.
Download or read book New Man machine Interfaces in Nuclear Power Plants written by OECD Nuclear Energy Agency and published by . This book was released on 1994 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Human Factors Testing and Evaluation written by Samuel G. Charlton and published by CRC Press. This book was released on 2019-09-25 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like the first edition, the revision of this successful Handbook responds to the growing need for specific tools and methods for testing and evaluating human-system interfaces. Indications are that the market for information on these tools and applications will continue to grow in the 21st century. One of the goals of offering a second edition is to expand and emphasize the application chapters, providing contemporary examples of human factors test and evaluation (HFTE) enterprises across a range of systems and environments. Coverage of the standard tools and techniques used in HFTE have been updated as well. New features of the Handbook of Human Factors Testing and Evaluation include: *new chapters covering human performance testing, manufacturing ergonomics, anthropometry, generative design methods, and usability testing; *updated tools and techniques for modeling, simulation, embedded testing, training assessment, and psychophysiological measurement; *new applications chapters presenting human factors testing examples in aviation and avionics, forestry, road safety, and software systems; and *more examples, illustrations, graphics and tables have been added. The orientation of the current work has been toward breadth of coverage rather than in-depth treatment of a few issues or techniques. Experienced testers will find much that is familiar, as well as new tools, creative approaches, and a rekindled enthusiasm. Newcomers will discover the diversity of issues, methods, and creative approaches that make up the field. In addition, the book is written in such a way that individuals outside the profession should learn the intrinsic value and pleasure in ensuring safe, efficient, and effective operation, as well as increased user satisfaction through HFTE.
Download or read book Instrumentation and Control Systems Important to Safety in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recommends how the requirements established in Safety Standards Series No. NS-R-1, Safety of Nuclear Power Plants: Design, should be met for instrumentation and control systems important to safety.
Download or read book Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems written by Yastrebenetsky, Michael A. and published by IGI Global. This book was released on 2020-05-22 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety and security are crucial to the operations of nuclear power plants, but cyber threats to these facilities are increasing significantly. Instrumentation and control systems, which play a vital role in the prevention of these incidents, have seen major design modifications with the implementation of digital technologies. Advanced computing systems are assisting in the protection and safety of nuclear power plants; however, significant research on these computational methods is deficient. Cyber Security and Safety of Nuclear Power Plant Instrumentation and Control Systems is a pivotal reference source that provides vital research on the digital developments of instrumentation and control systems for assuring the safety and security of nuclear power plants. While highlighting topics such as accident monitoring systems, classification measures, and UAV fleets, this publication explores individual cases of security breaches as well as future methods of practice. This book is ideally designed for engineers, industry specialists, researchers, policymakers, scientists, academicians, practitioners, and students involved in the development and operation of instrumentation and control systems for nuclear power plants, chemical and petrochemical industries, transport, and medical equipment.
Download or read book Protection System and Related Features in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1980 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide gives design guidance on requirements for the protection system which monitors the relevant plant variables and performs - in conjunction with the safety actuation systems and safety system support features - all safety tasks that may become necessary when unacceptable.
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Instrumentation and Control Systems for Nuclear Power Plants written by Mauro Cappelli and published by Woodhead Publishing. This book was released on 2023-03-21 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrumentation and Control Systems for Nuclear Power Plants provides the latest innovative research onthe design of effective modern I&C systems for both existing and newly commissioned plants, along withinformation on system implementation. Dr. Cappelli and his team of expert contributors cover fundamentals,explore the most advanced research in control systems technology, and tackle topics such as the human–machine interface, control room redesign, and control modeling. The inclusion of codes and standards,inspection procedures, and regulatory issues ensure that the reader can confidently design their own I&Csystems and integrate them into existing nuclear sites and projects. Covers various viewpoints, including theory, modeling, design and applications of I&C systems Includes codes and standards, inspection procedures and regulatory issues Combines engineering and physics aspects in one thorough resource, presenting human factors, modeling and HMI together for the first time Instrumentation and Control Systems for Nuclear Power Plants highlights the key role nuclear energy plays in the transition to a lower-carbon energy mix
Download or read book Nuclear Power Plants Innovative Technologies for Instrumentation and Control Systems written by Yang Xu and published by Springer. This book was released on 2017-12-12 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected papers from the Second International Symposium on Software Reliability, Industrial Safety, Cyber Security and Physical Protection of Nuclear Power Plant, held in Chengdu, China on August 23–25, 2017. The symposium provided a platform of technical exchange and experience sharing for a broad range of experts, scholars and nuclear power practitioners. The book reflects the state of the art and latest trends in nuclear instrumentation and control system technologies, as well as China’s growing influence in this area. It offers a valuable resource for both practitioners and academics working in the field of nuclear instrumentation, control systems and other safety-critical systems, as well as nuclear power plant managers, public officials and regulatory authorities.
Download or read book Nuclear Employee Safety Concerns written by Larry Horinko and published by DIANE Publishing. This book was released on 1997-07 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt: A nuclear power plant accident could result in severe harm or death not only for workers but also for thousands of people living in the surrounding area. The NRC is responsible for monitoring the 100 nuclear power plants & over 6,000 people licensed to possess & use nuclear materials & wastes. This report describes how federal laws & regulations protect nuclear power industry employees from discrimination for raising health & safety concerns, & determines the implementation status of recommendations made in recent internal audits of the system for protecting workers, & assesses the changes to the system.
Download or read book Safety Reliability and Applications of Emerging Intelligent Control Technologies written by T.S. Ng and published by Elsevier. This book was released on 2014-06-28 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly, over the last few years, intelligent controllers have been incorporated into control systems. Presently, the numbers and types of intelligent controllers that contain variations of fuzzy logic, neural network, genetic algorithms or some other forms of knowledge based reasoning technology are dramatically rising. However, considering the stability of the system, when such controllers are included it is difficult to analyse and predict system behaviour under unexpected conditions. Leading researchers and industrial practitioners were able to discuss and evaluate current development and future research directions at the first IFAC International Workshop on safety, reliability and applications on emerging intelligent control technology. This publication contains the papers, covering a wide range of topics, presented at the workshop.
Download or read book Proceedings of the 1997 IEEE Sixth Conference on Human Factors and Power Plants written by David I. Gertman and published by . This book was released on 1997 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Development and Evaluation of Guidelines for the Review of Advanced Human system Interfaces written by and published by . This book was released on 1992 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced control rooms for future nuclear power plants are being designed utilizing computer-based technologies. The US Nuclear Regulatory Commission reviews the human engineering aspects of such control rooms to ensure that they are designed to good human factors engineering principles and that operator performance and reliability are appropriately supported in order to protect public health and safety. This paper describes a general approach to advanced human-system interface review, development of human factors guidelines to support NRC safety reviews of advanced systems, and the results of a guideline test and evaluation program.
Download or read book Protection against Internal Hazards in the Design of Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-09-08 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internal hazards have to be considered in the design of items important to safety in a nuclear power plant. The objective is to provide appropriate features to prevent internal hazards and mitigate their effects to ensure that safety is not compromised. This Safety Guide provides recommendations to regulatory bodies, nuclear power plant designers and licensees on hazard assessment (including for combinations of hazards) and design concepts for protection against internal hazards in nuclear power plants, in order to meet the requirements established in IAEA Safety Standards Series No. SSR 2/1 (Rev. 1), Safety of Nuclear Power Plants: Design. The following internal hazards are reviewed in this Safety Guide: fires, explosions, missiles, pipe breaks, flooding, collapse of structures and falling objects with a focus on heavy load drop, electromagnetic interference and release of hazardous substances originating from within the site boundary.
Download or read book Protection Against Internal and External Hazards in the Operation of Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-03-30 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides specific recommendations on protection against internal and external hazards in the operation of nuclear power plants. It provides new or updated recommendations derived from enhanced understanding of operational aspects of hazards and combinations of hazards. Operating experience gained from incidents and accidents in nuclear power plants around the world has demonstrated that fire can be an important risk contributor in many Member States. However, there are other internal and external hazards that have also to be considered in the design and operation of nuclear power plants. This Safety Guide supersedes and expands the scope of lAEA Safety Standards Series No. NS- G-2. 1, Fire Safety in the Operation of Nuclear Power Plants, to include recommendations on these other hazards.
