Download or read book Safety Critical Automotive Systems written by Juan R Pimentel and published by SAE International. This book was released on 2006-08-01 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the vehicle's most important subsystems, this book features an introduction by the editor and 40 SAE technical papers from 2001-2006. The papers are organized in the following sections, which parallel the steps to be followed while building a complete final system: Introduction to Safety-Critical Automotive Systems Safety Process and Standards Requirements, Specifications, and Analysis Architectural and Design Methods and Techniques Prototyping and Target Implementation Testing, Verifications, and Validation Methods

Download or read book Automotive System Safety written by Joseph D. Miller and published by John Wiley & Sons. This book was released on 2019-12-09 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains practical insights into automotive system safety with a focus on corporate safety organization and safety management Functional Safety has become important and mandated in the automotive industry by inclusion of ISO 26262 in OEM requirements to suppliers. This unique and practical guide is geared toward helping small and large automotive companies, and the managers and engineers in those companies, improve automotive system safety. Based on the author’s experience within the field, it is a useful tool for marketing, sales, and business development professionals to understand and converse knowledgeably with customers and prospects. Automotive System Safety: Critical Considerations for Engineering and Effective Management teaches readers how to incorporate automotive system safety efficiently into an organization. Chapters cover: Safety Expectations for Consumers, OEMs, and Tier 1 Suppliers; System Safety vs. Functional Safety; Safety Audits and Assessments; Safety Culture; and Lifecycle Safety. Sections on Determining Risk; Risk Reduction; and Safety of the Intended Function are also presented. In addition, the book discusses causes of safety recalls; how to use metrics as differentiators to win business; criteria for a successful safety organization; and more. Discusses Safety of the Intended Function (SOTIF), with a chapter about an emerging standard (SOTIF, ISO PAS 21448), which is for handling the development of autonomous vehicles Helps safety managers, engineers, directors, and marketing professionals improve their knowledge of the process of FS standards Aimed at helping automotive companies—big and small—and their employees improve system safety Covers auditing and the use of metrics Automotive System Safety: Critical Considerations for Engineering and Effective Management is an excellent book for anyone who oversees the safety and development of automobiles. It will also benefit those who sell and market vehicles to prospective customers.

Download or read book Safety Critical Systems Handbook written by David J. Smith and published by Elsevier. This book was released on 2010-11-11 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety Critical Systems Handbook: A Straightfoward Guide to Functional Safety, IEC 61508 (2010 Edition) and Related Standards, Including Process IEC 61511 and Machinery IEC 62061 AND ISO 13849, Third Edition, offers a practical guide to the functional safety standard IEC 61508. The book is organized into three parts. Part A discusses the concept of functional safety and the need to express targets by means of safety integrity levels. It places functional safety in context, along with risk assessment, likelihood of fatality, and the cost of conformance. It also explains the life-cycle approach, together with the basic outline of IEC 61508 (known as BS EN 61508 in the UK). Part B discusses functional safety standards for the process, oil, and gas industries; the machinery sector; and other industries such as rail, automotive, avionics, and medical electrical equipment. Part C presents case studies in the form of exercises and examples. These studies cover SIL targeting for a pressure let-down system, burner control system assessment, SIL targeting, a hypothetical proposal for a rail-train braking system, and hydroelectric dam and tidal gates. The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards Helps readers understand the process required to apply safety critical systems standards Real-world approach helps users to interpret the standard, with case studies and best practice design examples throughout

Download or read book Mission Critical and Safety Critical Systems Handbook written by Kim Fowler and published by Newnes. This book was released on 2009-11-19 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a consolidated, comprehensive information resource for engineers working with mission and safety critical systems. Principles, regulations, and processes common to all critical design projects are introduced in the opening chapters. Expert contributors then offer development models, process templates, and documentation guidelines from their own core critical applications fields: medical, aerospace, and military. Readers will gain in-depth knowledge of how to avoid common pitfalls and meet even the strictest certification standards. Particular emphasis is placed on best practices, design tradeoffs, and testing procedures. *Comprehensive coverage of all key concerns for designers of critical systems including standards compliance, verification and validation, and design tradeoffs *Real-world case studies contained within these pages provide insight from experience

Download or read book Developing Safety Critical Software written by Leanna Rierson and published by CRC Press. This book was released on 2017-12-19 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: The amount of software used in safety-critical systems is increasing at a rapid rate. At the same time, software technology is changing, projects are pressed to develop software faster and more cheaply, and the software is being used in more critical ways. Developing Safety-Critical Software: A Practical Guide for Aviation Software and DO-178C Compliance equips you with the information you need to effectively and efficiently develop safety-critical, life-critical, and mission-critical software for aviation. The principles also apply to software for automotive, medical, nuclear, and other safety-critical domains. An international authority on safety-critical software, the author helped write DO-178C and the U.S. Federal Aviation Administration’s policy and guidance on safety-critical software. In this book, she draws on more than 20 years of experience as a certification authority, an avionics manufacturer, an aircraft integrator, and a software developer to present best practices, real-world examples, and concrete recommendations. The book includes: An overview of how software fits into the systems and safety processes Detailed examination of DO-178C and how to effectively apply the guidance Insight into the DO-178C-related documents on tool qualification (DO-330), model-based development (DO-331), object-oriented technology (DO-332), and formal methods (DO-333) Practical tips for the successful development of safety-critical software and certification Insightful coverage of some of the more challenging topics in safety-critical software development and verification, including real-time operating systems, partitioning, configuration data, software reuse, previously developed software, reverse engineering, and outsourcing and offshoring An invaluable reference for systems and software managers, developers, and quality assurance personnel, this book provides a wealth of information to help you develop, manage, and approve safety-critical software more confidently.

Download or read book Safety critical Computer Systems written by Neil Storey and published by Addison Wesley Publishing Company. This book was released on 1996 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasingly microcomputers are being used in applications where their correct operation is vital to ensure the safety of the public and the environment: from anti-lock braking systems in automobiles, to fly-by-wire aircraft, to shut-down systems at nuclear power plants. It is, therefore, vital that engineers be aware of the safety implications of the systems they develop. This book is an introduction to the field of safety-critical computer systems written for any engineer who uses microcomputers within real-time embedded systems. It assumes no prior knowledge of safety, or of any specific computer hardware or programming language. This text is intended for both engineering and computer science students, and for practising engineers within computer related industries. The approach taken is equally suited to engineers who consider computers from a hardware, software or systems viewpoint.

Download or read book Embedded Software Development for Safety Critical Systems written by Chris Hobbs and published by CRC Press. This book was released on 2015-10-06 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety-critical devices, whether medical, automotive, or industrial, are increasingly dependent on the correct operation of sophisticated software. Many standards have appeared in the last decade on how such systems should be designed and built. Developers, who previously only had to know how to program devices for their industry, must now understand remarkably esoteric development practices and be prepared to justify their work to external auditors. Embedded Software Development for Safety-Critical Systems discusses the development of safety-critical systems under the following standards: IEC 61508; ISO 26262; EN 50128; and IEC 62304. It details the advantages and disadvantages of many architectural and design practices recommended in the standards, ranging from replication and diversification, through anomaly detection to the so-called "safety bag" systems. Reviewing the use of open-source components in safety-critical systems, this book has evolved from a course text used by QNX Software Systems for a training module on building embedded software for safety-critical devices, including medical devices, railway systems, industrial systems, and driver assistance devices in cars. Although the book describes open-source tools for the most part, it also provides enough information for you to seek out commercial vendors if that’s the route you decide to pursue. All of the techniques described in this book may be further explored through hundreds of learned articles. In order to provide you with a way in, the author supplies references he has found helpful as a working software developer. Most of these references are available to download for free.

Download or read book Automotive Systems and Software Engineering written by Yanja Dajsuren and published by Springer. This book was released on 2019-07-17 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art, challenges and future trends in automotive software engineering. The amount of automotive software has grown from just a few lines of code in the 1970s to millions of lines in today’s cars. And this trend seems destined to continue in the years to come, considering all the innovations in electric/hybrid, autonomous, and connected cars. Yet there are also concerns related to onboard software, such as security, robustness, and trust. This book covers all essential aspects of the field. After a general introduction to the topic, it addresses automotive software development, automotive software reuse, E/E architectures and safety, C-ITS and security, and future trends. The specific topics discussed include requirements engineering for embedded software systems, tools and methods used in the automotive industry, software product lines, architectural frameworks, various related ISO standards, functional safety and safety cases, cooperative intelligent transportation systems, autonomous vehicles, and security and privacy issues. The intended audience includes researchers from academia who want to learn what the fundamental challenges are and how they are being tackled in the industry, and practitioners looking for cutting-edge academic findings. Although the book is not written as lecture notes, it can also be used in advanced master’s-level courses on software and system engineering. The book also includes a number of case studies that can be used for student projects.

Download or read book The Safety Critical Systems Handbook written by David J. Smith and published by Butterworth-Heinemann. This book was released on 2016-08-04 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Safety Critical Systems Handbook: A Straightforward Guide to Functional Safety: IEC 61508 (2010 Edition), IEC 61511 (2016 Edition) & Related Guidance, Fourth Edition, presents the latest on the electrical, electronic, and programmable electronic systems that provide safety functions that guard workers and the public against injury or death, and the environment against pollution. The international functional safety standard IEC 61508 was revised in 2010, and authors David Smith and Kenneth Simpson provide a comprehensive guide to the revised standard, as well as the revised IEC 61511 (2016). The book enables engineers to determine if a proposed or existing piece of equipment meets the safety integrity levels (SIL) required by the various standards and guidance, and also describes the requirements for the new alternative route (route 2H), introduced in 2010. A number of other areas have been updated by Smith and Simpson in this new edition, including the estimation of common cause failure, calculation of PFDs and failure rates for redundant configurations, societal risk, and additional second tier guidance documents. As functional safety is applicable to many industries, this book will have a wide readership beyond the chemical and process sector, including oil and gas, machinery, power generation, nuclear, aircraft, and automotive industries, plus project, instrumentation, design, and control engineers. Provides the only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards Addresses the 2016 updates to IEC 61511 to helps readers understand the processes required to apply safety critical systems standards and guidance Presents a real-world approach that helps users interpret new standards, with case studies and best practice design examples throughout

Download or read book Design and Technologies for Automotive Safety critical Systems written by and published by . This book was released on 2000 with total page 83 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Embedded Software Development for Safety Critical Systems Second Edition written by Chris Hobbs and published by CRC Press. This book was released on 2019-08-16 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a book about the development of dependable, embedded software. It is for systems designers, implementers, and verifiers who are experienced in general embedded software development, but who are now facing the prospect of delivering a software-based system for a safety-critical application. It is aimed at those creating a product that must satisfy one or more of the international standards relating to safety-critical applications, including IEC 61508, ISO 26262, EN 50128, EN 50657, IEC 62304, or related standards. Of the first edition, Stephen Thomas, PE, Founder and Editor of FunctionalSafetyEngineer.com said, "I highly recommend Mr. Hobbs' book."

Download or read book Automotive Safety Handbook written by Ulrich Seiffert and published by . This book was released on 2003 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines the state-of-the-art in passenger car vehicle safety. Looks at both active and passive safety systems. Describes basic relationships and new developments related to accident avoidance (including man/machine interface) and mitigation of injuries. In addition to detail on accident avoidance, occupant protection and biomechanics, the book features thorough discussion of the interrelationships among the occupant, the vehicle and the restraint system (in frontal, lateral, rear impacts and rollover). Other subjects covered include safety legislation, vehicle body and interior design, accident simulation tests, pedestrian protection and compatibility.

Download or read book Embedded Software Development for Safety Critical Systems written by Chris Hobbs and published by CRC Press. This book was released on 2017-09-07 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I highly recommend Mr. Hobbs' book." - Stephen Thomas, PE, Founder and Editor of FunctionalSafetyEngineer.com Safety-critical devices, whether medical, automotive, or industrial, are increasingly dependent on the correct operation of sophisticated software. Many standards have appeared in the last decade on how such systems should be designed and built. Developers, who previously only had to know how to program devices for their industry, must now understand remarkably esoteric development practices and be prepared to justify their work to external auditors. Embedded Software Development for Safety-Critical Systems discusses the development of safety-critical systems under the following standards: IEC 61508; ISO 26262; EN 50128; and IEC 62304. It details the advantages and disadvantages of many architectural and design practices recommended in the standards, ranging from replication and diversification, through anomaly detection to the so-called "safety bag" systems. Reviewing the use of open-source components in safety-critical systems, this book has evolved from a course text used by QNX Software Systems for a training module on building embedded software for safety-critical devices, including medical devices, railway systems, industrial systems, and driver assistance devices in cars. Although the book describes open-source tools for the most part, it also provides enough information for you to seek out commercial vendors if that’s the route you decide to pursue. All of the techniques described in this book may be further explored through hundreds of learned articles. In order to provide you with a way in, the author supplies references he has found helpful as a working software developer. Most of these references are available to download for free.

Download or read book Automotive Systems Engineering written by Markus Maurer and published by Springer Science & Business Media. This book was released on 2013-05-22 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reflects the shift in design paradigm in automobile industry. It presents future innovations, often referred as “automotive systems engineering”. These cause fundamental innovations in the field of driver assistance systems and electro-mobility as well as fundamental changes in the architecture of the vehicles. New driving functionalities can only be realized if the software programs of multiple electronic control units work together correctly. This volume presents the new and innovative methods which are mandatory to master the complexity of the vehicle of the future.

Download or read book Automotive Software Architectures written by Miroslaw Staron and published by Springer Nature. This book was released on 2021-03-01 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of software architecture as one of the cornerstones of software in modern cars. Following a historical overview of the evolution of software in modern cars and a discussion of the main challenges driving that evolution, Chapter 2 describes the main architectural styles of automotive software and their use in cars’ software. Chapter 3 details this further by presenting two modern architectural styles, i.e. centralized and federated software architectures. In Chapter 4, readers will find a description of the software development processes used to develop software on the car manufacturers’ side. Chapter 5 then introduces AUTOSAR – an important standard in automotive software. Chapter 6 goes beyond simple architecture and describes the detailed design process for automotive software using Simulink, helping readers to understand how detailed design links to high-level design. The new chapter 7 reports on how machine learning is exploited in automotive software e.g. for image recognition and how both on-board and off-board learning are applied. Next, Chapter 8 presents a method for assessing the quality of the architecture – ATAM (Architecture Trade-off Analysis Method) – and provides a sample assessment, while Chapter 9 presents an alternative way of assessing the architecture, namely by using quantitative measures and indicators. Subsequently Chapter 10 dives deeper into one of the specific properties discussed in Chapter 8 – safety – and details an important standard in that area, the ISO/IEC 26262 norm. Lastly, Chapter 11 presents a set of future trends that are currently emerging and have the potential to shape automotive software engineering in the coming years. This book explores the concept of software architecture for modern cars and is intended for both beginning and advanced software designers. It mainly aims at two different groups of audience – professionals working with automotive software who need to understand concepts related to automotive architectures, and students of software engineering or related fields who need to understand the specifics of automotive software to be able to construct cars or their components. Accordingly, the book also contains a wealth of real-world examples illustrating the concepts discussed and requires no prior background in the automotive domain. Compared to the first edition, besides the two new chapters 3 and 7 there are considerable updates in chapters 5 and 8 especially.

Download or read book Reliability of Safety Critical Systems written by Marvin Rausand and published by John Wiley & Sons. This book was released on 2014-03-03 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents the theory and methodology for reliability assessments of safety-critical functions through examples from a wide range of applications Reliability of Safety-Critical Systems: Theory and Applications provides a comprehensive introduction to reliability assessments of safety-related systems based on electrical, electronic, and programmable electronic (E/E/PE) technology. With a focus on the design and development phases of safety-critical systems, the book presents theory and methods required to document compliance with IEC 61508 and the associated sector-specific standards. Combining theory and practical applications, Reliability of Safety-Critical Systems: Theory and Applications implements key safety-related strategies and methods to meet quantitative safety integrity requirements. In addition, the book details a variety of reliability analysis methods that are needed during all stages of a safety-critical system, beginning with specification and design and advancing to operations, maintenance, and modification control. The key categories of safety life-cycle phases are featured, including strategies for the allocation of reliability performance requirements; assessment methods in relation to design; and reliability quantification in relation to operation and maintenance. Issues and benefits that arise from complex modern technology developments are featured, as well as: Real-world examples from large industry facilities with major accident potential and products owned by the general public such as cars and tools Plentiful worked examples throughout that provide readers with a deeper understanding of the core concepts and aid in the analysis and solution of common issues when assessing all facets of safety-critical systems Approaches that work on a wide scope of applications and can be applied to the analysis of any safety-critical system A brief appendix of probability theory for reference With an emphasis on how safety-critical functions are introduced into systems and facilities to prevent or mitigate the impact of an accident, this book is an excellent guide for professionals, consultants, and operators of safety-critical systems who carry out practical, risk, and reliability assessments of safety-critical systems. Reliability of Safety-Critical Systems: Theory and Applications is also a useful textbook for courses in reliability assessment of safety-critical systems and reliability engineering at the graduate-level, as well as for consulting companies offering short courses in reliability assessment of safety-critical systems.

Download or read book Formal Techniques for Safety Critical Systems written by Cyrille Artho and published by Springer. This book was released on 2016-02-02 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 4th International Workshop on Formal Techniques for Safety-Critical Systems, FTSCS 2015, held in Paris, France, in November 2015. The 15 revised full papers presented together with one invited talk and two tool papers were carefully reviewed and selected from 41 submissions. The papers are organized in topical sections on timed systems; railway systems; fault tolerance; automotive systems; software and systems analysis; tools.