Download or read book SAE Interior Climate Control Standards Manual 1999 Edition written by Society of Automotive Engineers and published by . This book was released on 1999-05-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides a comprehensive compilation of the SAE technical reports relating to specifications, testing, and defining of interior climate control equipment, components, and procedures. A key word index is also included. Topics covered are: Motor Vehicle Heater Test Procedure Passenger Car Windshield Defrosting Systems Vehicle Testing Requirements for Replacement Refrigerants for CFC-12 (R-12) Mobile Air-Conditioning Systems Recovery and Recycle Equipment for Mobile Automotive Air Conditioning Systems Service Hose for Automotive Air Conditioning and many more.

Download or read book SAE Interior Climate Control Standards Manual written by and published by . This book was released on 1994 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sae Interior Climate Control Standards Manual written by Society of Automotive Engineers and published by . This book was released on 1997-05-01 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety Standards for Motor Vehicle Refrigerant Vapor Compressions Systems written by Interior Climate Control Steering Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks and commercial vehicles (on and off road) that use automotive type mobile air conditioning (MAC) systems. Large trucks, buses and other vehicles that do not use typical automotive a/c systems or use refrigerants not listed in this document are not covered by this standard. This standard covers any vehicle with a MAC system using a belt or electric motor driven compressor. This document provides standards for design, assembly, test and service of MAC systems to minimize environmental, health and safety impacts. Also included are cautionary statements for the service industry to alert technicians to the inadvisability and possible health or safety effects associated with venting refrigerant during service. It is not intended to restrict the use, or further development, of other types of refrigeration systems for mobile air conditioning applications. This document may be amended or additional safety standards created should other systems become practical. This document addresses only HFC-134a (R-134a), carbon dioxide (R-744), and HFO-1234yf (R-1234yf) refrigerants. To prevent system contamination all refrigerants used in mobile air conditioning vapor compression systems require unique service fittings and service equipment. The unique service fittings are intended to eliminate the potential for system refrigerant cross-contamination during service activity. CFC-12 (R-12) is no longer in use in new MAC systems. The service fitting description is maintained as a reference for older vehicles still in use. When retrofitting an R-12 system to use R-134a or when removing R-12 (vehicle disposal) use service equipment designed for R-12 and certified to meet the requirements of SAE J1990 (R-12 recovery and recycle equipment). HFC-152a is an A2 flammable refrigerant as classified by ASHRAE 34 and should be used only with a secondary loop application. However, until MAC systems are developed to use R-152a (HFC-152a), no SAE Standards for system design, service equipment or service procedures have been established. The R-152a service fittings described within this Standard were established as part of the industries evaluation of replacement refrigerants and are maintained for future design guidance and to prevent potential refrigerant cross contamination.The SAE Interior Climate Control Standards Committee has been involved with the mobile air conditioning industry in developing alternate low GWP replacement refrigerants. The revisions in this document cover engineering guidelines and establishing specifications for mobile air conditioning systems using current and alternate replacement refrigerants. R 1234yf is added here for the first time.

Download or read book Procedure for Certification that Requirements for Mobile Air Conditioning System Components Service Equipment and Service Technician Training Meet SAE J Standards written by Interior Climate Control Steering Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard provides manufacturers, testing facilities and providers of technician training with a procedure for certifying compliance with the appropriate standards. Manufacturers who advertise their products as Certified to an SAE J standard shall follow this procedure. Certification of a product is voluntary, however, this certification process is mandatory for those advertising meeting SAE Standard(s) requirements. Only certifying to this standard allows those claiming compliance to advertise that their product (unit), component, or service meets all requirements of the specific SAE standard. Certification of compliance to this and the appropriate standard and use of the SAE label on the product shall only be permitted after all the required information has been submitted to SAE International and it has been posted on the SAE web site. This process is mandatory for those advertising as being "Certified to SAE JXXXX [appropriate SAE Standard] requirements or any advertising or labeling language that implies such certification. SAE International will post the results in the official SAE on-line database. SAE J2911 provides manufacturers, testing facilities, and technician training providers with a procedure for certifying compliance with the appropriate SAE standard. Regulatory agencies will also have access to the SAE International public posting of the results in the official SAE database.This document details the requirements for certification to certain SAE standards and the process to document these on the SAE International website. It also documents the conditions for use of the SAE name by companies that meet these standards. This version adds a table in the appendix to be filled out when certification is requested to SAE.

Download or read book Safety and Design Standards for Motor Vehicle Refrigerant Vapor Compression Systems written by Interior Climate Control Vehicle OEM Committee and published by . This book was released on 2020 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks, and commercial vehicles (on and off road) that use automotive type mobile air conditioning (MAC) systems. Large trucks, buses, and other vehicles that do not use typical automotive A/C systems or use refrigerants not listed in this document are not covered by this standard. This standard covers vehicles with MAC systems using belt driven compressors and electric motor driven compressors.This document provides industry-recognized standards for the design, assembly, and test of MAC systems, including necessary service equipment, and is intended to cover all phases of the lifetime of MAC systems to minimize environmental, health, and safety impacts. The standards listed in this document cover the currently accepted industry guidelines and procedures. The standards can be used as requirements for regulatory authorities to meet minimum environmental, health, and safety requirements. Also included are cautionary statements for the service industry to alert technicians to the inadvisability and possible health or safety effects associated with venting refrigerant during service. It is not intended to restrict the use, or further development of, other types of refrigerants or refrigeration systems for MAC applications. This document may be amended, or additional safety standards created, should other refrigerants or refrigeration systems become practical. This document addresses only HFC-134a (R-134a), carbon dioxide (R-744), HFO-1234yf (R-1234yf), and HFC-152a (R-152a) refrigerants. For R-152a refrigerants, this standard will only apply to secondary loop systems. To prevent system contamination, all refrigerants used in MAC vapor compression systems require unique service fittings and service equipment. The unique service fittings are intended to significantly reduce the potential for refrigerant cross-contamination during service activities.CFC-12 (R-12) is no longer in use in new MAC systems. The service fitting description is maintained as a reference for older vehicles still in use. When retrofitting an R-12 system to use R-134a or when removing R-12 (during vehicle disposal), use service equipment designed for R-12 and certified to meet the requirements of SAE J1990 (R-12 recovery and recycle equipment). This document covers refrigerant system design and safety related requirements for refrigerants used in mobile air conditioning (MAC) systems and is being updated for the addition of a secondary loop R-152a system and general improvements for example and clarity. The intent of this standard is to ensure safe MAC systems by forcing proper risk assessments and appropriate design solutions.

Download or read book SAE Surface Vehicle Emissions Standards Manual written by and published by . This book was released on 1998 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Safety Standards for Motor Vehicle Refrigerant Vapor Compression Systems written by Interior Climate Control Vehicle OEM Committee and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks and commercial vehicles (on and off road) that use automotive type mobile air conditioning [MAC] systems. Large trucks, buses and other vehicles that do not use typical automotive a/c systems or use refrigerants not listed in this document are not covered by this standard. This standard covers any vehicle with a MAC system using a belt or electric motor driven compressor.This document provides standards for design, assembly, test and service of MAC systems to minimize environmental, health and safety impacts. Also included are cautionary statements for the service industry to alert technicians to the inadvisability and possible health or safety effects associated with venting refrigerant during service. It is not intended to restrict the use, or further development, of other types of refrigeration systems for mobile air conditioning applications. This document may be amended or additional safety standards created should other systems become practical. This document addresses only HFC-134a (R-134a), carbon dioxide (R-744), and HFO-1234yf (R-1234yf) refrigerants. To prevent system contamination all refrigerants used in mobile air conditioning vapor compression systems require unique service fittings and service equipment. The unique service fittings are intended to eliminate the potential for system refrigerant cross-contamination during service activity.CFC-12 (R-12) is no longer in use in new MAC systems. The service fitting description is maintained as a reference for older vehicles still in use. When retrofitting an R-12 system to use R-134a or when removing R-12 (vehicle disposal) use service equipment designed for R-12 and certified to meet the requirements of SAE J1990 (R-12 recovery and recycle equipment).HFC-152a is an A2 flammable refrigerant as classified by ASHRAE 34 and should be used only with a secondary loop application. However, until MAC systems are developed to use R-152a (HFC-152a), no SAE Standards for system design, service equipment or service procedures have been established. The R-152a service fittings described within this Standard were established as part of the industries evaluation of replacement refrigerants and are maintained for future design guidance and to prevent potential refrigerant cross contamination. This document covers refrigerant system design and safety related requirements for refrigerants used in mobile air conditioning (MAC) systems and is being revised to comprehend R-1234yf. The current wording of 4.1.1 prohibits refrigerants that are rated less than A2L which would exclude R-152a. Later in the document, J639 defines the fittings for R-152a. The intent of this revision is to insure safe mobile air conditioning systems by forcing proper risk assessments and appropriate design solutions while correcting this conflict with regards to R152a.

Download or read book Safety Standards for Motor Vehicle Refrigerant Vapor Compression Systems written by and published by . This book was released on 2011 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The SAE Interior Climate Control Standards Committee has been involved with the mobile air conditioning industry in developing alternate low GWP replacement refrigerants. The revisions in this document cover engineering guidelines and establishing specifications for mobile air conditioning systems using current and alternate replacement refrigerants. R-1234yf is added here for the first time. This SAE Standard applies to refrigerant vapor compression systems that provide cooling and/or heating for passenger cars, light trucks and commercial vehicles (on and off road) that use automotive type mobile air conditioning (MAC) systems ... This document provides standards for the design, assembly, test and service of MAC systems to minimize environmental, health and safety impacts."--P. [1].

Download or read book Books In Print 2004 2005 written by Ed Bowker Staff and published by R. R. Bowker. This book was released on 2004 with total page 3274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SAE Automotive Textiles and Trim Standards Manual written by Society of Automotive Engineers Staff and published by . This book was released on 1999-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SAE Surface Vehicle Emissions Standards Manual written by Society of Automotive Engineers and published by . This book was released on 1995 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Code of Federal Regulations written by and published by . This book was released on 1996 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special edition of the Federal Register, containing a codification of documents of general applicability and future effect ... with ancillaries.

Download or read book The Code of Federal Regulations of the United States of America written by and published by . This book was released on 1999 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Code of Federal Regulations is the codification of the general and permanent rules published in the Federal Register by the executive departments and agencies of the Federal Government.

Download or read book SAE Fluid Conductors and Connectors Standards Manual written by and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sae Fluid Conductors and Connectors written by Society of Automotive Engineers and published by . This book was released on 1996-01-01 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Index of Specifications and Standards written by and published by . This book was released on 2005 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: