Download or read book Runaway and Thermally Safe Operation of Batch and Semi batch Reactors written by Metske Steensma and published by . This book was released on 1990 with total page 147 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Runaway and Thermally Safe Operation of a Nitric Acid Oxidation in a Semi batch Reactor written by Bob Arnold August van Woezik and published by . This book was released on 2000 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Methods for Assessing Thermal Runaway Risks in Batch and Semi batch Reactors written by Vinay Prasad and published by . This book was released on 1998 with total page 8 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Safety of Chemical Batch Reactors and Storage Tanks written by A. Benuzzi and published by Springer. This book was released on 1991-03-31 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the Lectures given during the Eurocourse, held at the Joint Research Centre Ispra, Italy, April 15--19, 1991
Download or read book Thermal Safety of Chemical Processes written by Francis Stoessel and published by John Wiley & Sons. This book was released on 2021-05-24 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vollständig überarbeitete,aktualisierte 2. Auflage mit fünf neuen Kapiteln und den aktuellen IUPAC-Normen. Beschäftigt sich mit thermischen Risiken in der chemischen Prozessindustrie. Jedes Kapitel beginnt mit einer Fallstudie und den aus Zwischenfällen gewonnen Erkenntnissen.
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants written by A. Kayode Coker and published by Elsevier. This book was released on 2011-08-30 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: This complete revision of Applied Process Design for Chemical and Petrochemical Plants, Volume 1 builds upon Ernest E. Ludwig’s classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes important supplemental mechanical and related data, nomographs and charts. Also included within are improved techniques and fundamental methodologies, to guide the engineer in designing process equipment and applying chemical processes to properly detailed equipment. All three volumes of Applied Process Design for Chemical and Petrochemical Plants serve the practicing engineer by providing organized design procedures, details on the equipment suitable for application selection, and charts in readily usable form. Process engineers, designers, and operators will find more chemical petrochemical plant design data in: Volume 2, Third Edition, which covers distillation and packed towers as well as material on azeotropes and ideal/non-ideal systems. Volume 3, Third Edition, which covers heat transfer, refrigeration systems, compression surge drums, and mechanical drivers. A. Kayode Coker, is Chairman of Chemical & Process Engineering Technology department at Jubail Industrial College in Saudi Arabia. He’s both a chartered scientist and a chartered chemical engineer for more than 15 years. and an author of Fortran Programs for Chemical Process Design, Analysis and Simulation, Gulf Publishing Co., and Modeling of Chemical Kinetics and Reactor Design, Butterworth-Heinemann. Provides improved design manuals for methods and proven fundamentals of process design with related data and charts Covers a complete range of basic day-to-day petrochemical operation topics with new material on significant industry changes since 1995.
Download or read book Tenth International Symposium on Chemical Reaction Engineering written by J. R. Bourne and published by Elsevier. This book was released on 2017-05-04 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: ISCRE 10 Tenth International Symposium on Chemical Reaction Engineering documents the proceedings of the symposium which brought together experts from all over the world to discuss developments in CRE. Efforts were made to cover high added value substances and to encourage papers from industry. Some success was achieved, but there remain significant gaps between Chemists and Chemical Engineers when considering high added value products as well as between researchers and practitioners of CRE. The volume begins with plenary papers covering topics such as challenges in reactor modeling; bioreactor engineering; the design of reaction systems for specialty organic chemicals. This is followed by papers presented during the eight technical sessions. Technical session A focused on the modeling and control of chemical reactions. Technical session B was devoted to studies on biotechnology. Technical session C covered mixing while Technical session D dealt with special reactor systems and chemicals. The papers in Technical session E examined reactions for emission control and recycling. Technical session F covered the safety aspects of CRE. Technical session G focused on the experiments with multiphase reactions while Technical session H dealt with catalytic reactors.
Download or read book Ludwig s Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents written by A. Kayode Coker and published by Elsevier. This book was released on 2024-07-10 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ludwig’s Applied Process Design for Chemical and Petrochemical Plants Incorporating Process Safety Incidents is ever evolving starting with the first edition some 60 years ago. The volumes in this fifth edition provide improved techniques and fundamental design methodologies to guide the practicing engineer in designing process equipment and applying chemical processes to the properly detailed hardware. As indicative of the new title, process safety incidents are incorporated in many of the chapters, reviewing the root causes, and how these could be mitigated in future. Like its predecessor, this new edition continues to present updated information for achieving optimum operational and process conditions and to avoid problems caused by inadequate sizing and lack of internally detailed hardware. The volumes provide both fundamental theories where applicable and direct application of these theories to applied equations essential in the design effort. This approach in presenting design information is essential for troubleshooting process equipment and in executing system performance analysis. Volume 1B continues to cover mixing of liquids, process safety and pressure[1]relieving devices, metallurgy and corrosion, and process optimization. It builds upon Ernest E. Ludwig’s classic text to further enhance its use as a chemical engineering process design manual of methods and proven fundamentals. This new edition includes new content on three-phase separation, mixing of liquids, ejectors, and mechanical vacuum systems, process safety and pressure-relieving devices, metallurgy and corrosion, and optimization of chemical process/blending. Some chapters review pressure-relieving devices and provide case studies for process safety incidents, which are well illustrated from US Chemical Safety Hazard Investigation Board (www.csb.gov). Finally, this book contains a glossary of Petroleum and Petrochemical Terminologies and Physical and Chemical Characteristics of Major Hydrocarbons. ? Provides improved design manual for methods and proven fundamentals of process design with related data and charts ? Covers complete range of basic day-to-day petrochemical operation topics ? Extensively revised with new material added on three-phase separation, metallurgy, and corrosion ? Process safety management/HAZOP and hazard analyses, and optimization of chemical process/blending ? Presents many examples using Honeywell UniSim Design software, developed and executable computer programs, and Excel spreadsheet programs ? Includes case studies of process safety incidents, guidance for troubleshooting, and checklists ? Includes Software of Conversion Table and 30+ process data sheets in excel format
Download or read book Chemical Reaction Hazards written by John Barton and published by IChemE. This book was released on 1997 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Assess the potential hazards of your process before designing the plant. 100 case studies have been added to the original text of the first edition. This second edition provides a basis for the identification and evaluation of chemical reaction hazards not only for practising chemists, engineers and plant personnel but also for students.
Download or read book Chemical Reaction Hazards written by John Barton and published by Gulf Professional Publishing. This book was released on 1997-02-27 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition of a best-selling book continues to provide a basis for the identification and evaluation of chemical reaction hazards for chemists, engineers, plant personnel, and students. Before undertaking the design of a chemical manufacturing process it is vital that the chemical reactions involved be fully understood, potential hazards assessed, and safety measures planned. Chemical Reaction Hazards aims to help the people responsible for this design and operation to meet the general duties of safety. Two major additions to this revised book are the appendices. One of these describes 100 incidents, illustrating their cause and indicating consequences if appropriate procedures within this guide are not followed. The second provides a practical example of a typical chemical reaction hazard assessment, from consideration of the process description, through experimental testing to the specification of safety measures.
Download or read book Control and Monitoring of Chemical Batch Reactors written by Fabrizio Caccavale and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical Batch Reactor is aimed at tackling the above problems from a blending of academic and industrial perspectives. Advanced solutions (i.e., those based on recent research results) to the four fundamental problems of modeling, identification, control and fault diagnosis for batch processes are developed in detail in four distinct chapters. In each chapter, a general overview of foundational concepts is also given, together with a review of recent and classical literature on the various subjects. To provide a unitary treatment of the different topics and give a firm link to the underlying practical applications, a single case study is developed as the book progresses; a batch process of industrial interest, i.e., the phenol-formaldehyde reaction for the production of phenolic resins, is adopted to test the various techniques developed. In this way, a roadmap of the solutions to fundamental problems, ranging from the early stages of the production process to the complete design of control and diagnosis systems, is provided for both industrial practitioners and academic researchers.
Download or read book Petroleum Refining Design and Applications Handbook Volume 5 written by A. Kayode Coker and published by John Wiley & Sons. This book was released on 2023-06-22 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: PETROLEUM REFINING With no new refineries having been built in decades, companies continue to build onto or reverse engineer and re-tool existing refineries. With so many changes in the last few years alone, books like this are very much in need. There is truly a renaissance for chemical and process engineering going on right now across multiple industries. This fifth and final volume in the “Petroleum Refining Design and Applications Handbook” set, this book continues the most up-to-date and comprehensive coverage of the most significant and recent changes to petroleum refining, presenting the state-of-the-art to the engineer, scientist, or student. Besides the list below, this groundbreaking new volume describes blending of products from the refinery, applying the ternary diagrams and classifications of crude oils, flash point blending, pour point blending, aniline point blending, smoke point and viscosity blending, cetane and diesel indices. The volume further reviews refinery operational cost, cost allocation of actual usage, project and economic evaluation involving cost estimation, cash flow involving return on investment, net present values, discounted cash flow rate of return, net present values, payback period, inflation and sensitivity analysis, and so on. It reviews global effects on the refining economy, carbon tax, carbon foot print, global warming potential, carbon dioxide equivalent, carbon credit, carbon offset, carbon price, and so on. It reviews sustainability in petroleum refining and alternative fuels (biofuels and so on), impact of the overall greenhouse effects, carbon capture and storage in refineries, process intensification in biodiesel, biofuel from green diesel, acid-gas removal and emerging technologies, carbon capture and storage, gas heated reformer unit, pressure swing adsorption process, steam methane reforming for fuel cells, grey, blue and green hydrogen production, new technologies for carbon capture and storage, carbon clean process design, refinery of the future, refining and petrochemical industry characteristics. The text is packed with Excel spreadsheet calculations and Honeywell UniSim Design software in some examples, and it includes an invaluable glossary of petroleum and petrochemical technical terminologies. Useful as a textbook, this is also an excellent, handy go-to reference for the veteran engineer, a volume no chemical or process engineering library should be without. Written by one of the world’s foremost authorities, this book sets the standard for the industry and is an integral part of the petroleum refining renaissance. It is truly a must-have for any practicing engineer or student in this area.
Download or read book Guidelines for Chemical Reactivity Evaluation and Application to Process Design written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2010-09-09 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from international sources, this book provides principles and strategies for the evaluation of chemical reactions, and for using this information in process design and management. A useful resource for engineers who design, start-up, operate, and manage chemical and petrochemical plants, the book places special emphasis on the use of state-of-the-art technology in theory, testing methods, and applications in design and operations.
Download or read book Guidelines for Engineering Design for Process Safety written by CCPS (Center for Chemical Process Safety) and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated version of one of the most popular and widely used CCPS books provides plant design engineers, facility operators, and safety professionals with key information on selected topics of interest. The book focuses on process safety issues in the design of chemical, petrochemical, and hydrocarbon processing facilities. It discusses how to select designs that can prevent or mitigate the release of flammable or toxic materials, which could lead to a fire, explosion, or environmental damage. Key areas to be enhanced in the new edition include inherently safer design, specifically concepts for design of inherently safer unit operations and Safety Instrumented Systems and Layer of Protection Analysis. This book also provides an extensive bibliography to related publications and topic-specific information, as well as key information on failure modes and potential design solutions.
Download or read book 23 European Symposium on Computer Aided Process Engineering written by Ergys Pahija and published by Elsevier Inc. Chapters. This book was released on 2013-06-10 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt: Batch and semi-batch reactors are widely used for fine chemical productions. The target in the fine chemical industry is to produce a high quality product and operational optimization is the key-element to match it. This work investigates how batch and semibatch reactors can be optimized in order to increase the yield of a desired product. Optimization problem is formulated and applied to calculate the optimal operating parameters such as the reactor temperature and the feed flow rate. Comparison and considerations on the two reactor configurations are given.
Download or read book European Symposium on Computer Aided Process Engineering 11 written by R. Gani and published by Elsevier. This book was released on 2001-04-30 with total page 1205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains papers presented at the 11th Symposium of Computer Aided Process Engineering (ESCAPE-11), held in Kolding, Denmark, from May 27-30, 2001. The objective of ESCAPE-11 is to highlight the use of computers and information technology tools, that is, the traditional CAPE topics as well as the new CAPE topics of current and future interests.The main theme for ESCAPE-11 is process and tools integration with emphasis on hybrid processing, cleaner and efficient technologies (process integration), computer aided systems for modelling, design, synthesis, control (tools integration) and industrial case studies (application of integrated strategies). The papers are arranged in terms of the following themes: computer aided control/operations, computer aided manufacturing, process and tools integration, and new frontiers in CAPE. A total of 188 papers, consisting of 5 keynote and 183 contributed papers are included in this book.
Download or read book Pharmaceutical Manufacturing Handbook written by Shayne Cox Gad and published by John Wiley & Sons. This book was released on 2008-03-17 with total page 1396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook features contributions from a team of expert authors representing the many disciplines within science, engineering, and technology that are involved in pharmaceutical manufacturing. They provide the information and tools you need to design, implement, operate, and troubleshoot a pharmaceutical manufacturing system. The editor, with more than thirty years' experience working with pharmaceutical and biotechnology companies, carefully reviewed all the chapters to ensure that each one is thorough, accurate, and clear.
