Download or read book GB T 2008 GB 2008 Chinese National Standard PDF English Catalog year 2008 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2020-06-06 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document provides the comprehensive list of Chinese National Standards - Category: GB, GB/T Series of year 2008.

Download or read book Kwic Index of International Standards written by International Organization for Standardization and published by Geneva : ISO/IEC. This book was released on 1991 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Properties of Solid Polymers written by I. M. Ward and published by . This book was released on 1983-06-27 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise, self-contained introduction to solid polymers, the mechanics of their behavior and molecular and structural interpretations. This updated edition provides extended coverage of recent developments in rubber elasticity, relaxation transitions, non-linear viscoelastic behavior, anisotropic mechanical behavior, yield behavior of polymers, breaking phenomena, and other fields.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1967 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1993-10 with total page 830 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanics of Pneumatic Tires written by Samuel K. Clark and published by . This book was released on 1981 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Thermoplastic Elastomers written by Jiri George Drobny and published by Elsevier. This book was released on 2014-05-30 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Thermoplastic Elastomers, Second Edition presents a comprehensive working knowledge of thermoplastic elastomers (TPEs), providing an essential introduction for those learning the basics, but also detailed engineering data and best practice guidance for those already involved in polymerization, processing, and part manufacture. TPEs use short, cost-effective production cycles, with reduced energy consumption compared to other polymers, and are used in a range of industries including automotive, medical, construction and many more. This handbook provides all the practical information engineers need to successfully utilize this material group in their products, as well as the required knowledge to thoroughly ground themselves in the fundamental chemistry of TPEs. The data tables included in this book assist engineers and scientists in both selecting and processing the materials for a given product or application. In the second edition of this handbook, all chapters have been reviewed and updated. New polymers and applications have been added — particularly in the growing automotive and medical fields — and changes in chemistry and processing technology are covered. - Provides essential knowledge of the chemistry, processing, properties, and applications for both new and established technical professionals in any industry utilizing TPEs - Datasheets provide "at-a-glance" processing and technical information for a wide range of commercial TPEs and compounds, saving readers the need to contact suppliers - Includes data on additional materials and applications, particularly in automotive and medical industries

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Introduction to Polymer Viscoelasticity written by Montgomery T. Shaw and published by John Wiley & Sons. This book was released on 2005-08-19 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: A revised molecular approach to a classic on viscoelasticbehavior Because viscoelasticity affects the properties, appearance,processing, and performance of polymers such as rubber, plastic,and adhesives, a proper utilization of such polymers requires aclear understanding of viscoelastic behavior. Now in its third edition, Introduction to Polymer Viscoelasticityremains a classic in the literature of molecular viscoelasticity,bridging the gap between primers on polymer science and advancedresearch-level monographs. Assuming a molecular, rather than amechanical approach, the text provides a strong grounding in thefundamental concepts, detailed derivations, and particularattention to assumptions, simplifications, and limitations. This Third Edition has been entirely revised and updated to reflectrecent developments in the field. New chapters include: * Phenomenological Treatment of Viscoelasticity * Viscoelastic Models * Time-Temperature Correspondence * Transitions and Relaxation in Polymers * Elasticity of Rubbery Networks * Dielectric and NMR Methods With detailed explanations, corresponding equations, andexperimental methods, supported by real-life applications (as wellas the inclusion of a CD-ROM with data to support the exercises),this Third Edition provides today's students and professionals withthe tools they need to create polymers with more desirablequalities than ever.

Download or read book Polymer Engineering Science and Viscoelasticity written by Hal F. Brinson and published by Springer. This book was released on 2015-01-24 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a unified mechanics and materials perspective on polymers: both the mathematics of viscoelasticity theory as well as the physical mechanisms behind polymer deformation processes. Introductory material on fundamental mechanics is included to provide a continuous baseline for readers from all disciplines. Introductory material on the chemical and molecular basis of polymers is also included, which is essential to the understanding of the thermomechanical response. This self-contained text covers the viscoelastic characterization of polymers including constitutive modeling, experimental methods, thermal response, and stress and failure analysis. Example problems are provided within the text as well as at the end of each chapter. New to this edition: · One new chapter on the use of nano-material inclusions for structural polymer applications and applications such as fiber-reinforced polymers and adhesively bonded structures · Brings up-to-date polymer production and sales data and equipment and procedures for evaluating polymer characterization and classification · The work serves as a comprehensive reference for advanced seniors seeking graduate level courses, first and second year graduate students, and practicing engineers

Download or read book Rubber as a Construction Material for Corrosion Protection written by V. C. Chandrasekaran and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book on rubber used as a construction material dedicated to the chemical process industry Despite the long history of rubber as a construction material, this book is a unique publication as it comprehensively looks at the material with respect to the anti-corrosion requirements of the multitude of industries where rubber is used, both on land and offshore. This guide documents how rubber reliably meets the threats of corrosion and contributes to the longevity of the equipment. Chapters on ebonite, natural, and synthetic rubbers, examine their relevant properties and chemical resistance. The book details the practical aspects and handling of rubber lined equipment: thin-walled structures, vacuum vessels, ducts, large diameter tanks, agitators, and fully lined pipes (both inside and outside). Molded and fabricated products of ebonite and soft rubber as well as hand-made rubber products are shown along with vulcanization technology, testing and inspections, measurements and standards. Several case studies are included demonstrating the preferential choice of rubber as a construction material as well as practical applications and techniques of its usage in the chlor-alkali, fertilizer, mineral processing and other core chemical processing industries, which are the largest consumers of rubber as a material of construction. The volume ends with a section on aging and prediction of service life. Rubber as a Construction Material for Corrosion Protection will be used by chemical engineers, rubber technologists, students, research workers worldwide in the rubber industry and process industries such as fertilizer, mining and ore, oil & gas, paper and pulp, steel plants, as well as people engaged in corrosion protection. The book will also be very useful to the construction industry.

Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 1997-12-31 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.

Download or read book The Rubber Formulary written by Peter A. Ciullo and published by William Andrew. This book was released on 1999-12-31 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: A stable usage of rubber compounds in the production of components for almost every industry has created the need for this handbook and formulary. Convenience is the primary reason for such a book. With the variety of uses for rubber being as broad as the imagination, a formulary which includes an overview of the history of rubber, as well as sections on ingredients, processing methods, and testing, is a welcome addition to any manufacturer's library. Rubber products include seals and gaskets for windows, pressure and vacuum hoses for automotive and aerospace applications, bottle stoppers for medical and pharmaceutical products, center cores for all types of balls, belts for tools and machinery, shock and vibration absorbers for everything from motor mounts to sky scrapers, insulation for blankets, and even large film coatings for roofing applications. Additional industrial and consumer products are being designed out of rubber compounds every day.Whether you are involved with selling raw materials, producing rubber compounds, or designing rubber components and products, Rubber Formulary is the right sourcebook of data for your needs. This first-ever collection of 500 suggested formulas has been provided by raw materials suppliers around the world. Written for both technical and managerial personnel, this collection of formulas and basic texts will also benefit students and other individuals just entering the field.

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Technology of Rubber, Third Edition provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling.

Download or read book Tire Waste and Recycling written by Trevor Letcher and published by Academic Press. This book was released on 2021-03-25 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tire Waste and Recycling takes a methodical approach to the recycling of tires, providing a detailed understanding on how to manage, process, and turn waste tires into valuable materials and industrial applications. Sections cover fundamental aspects such as tire use, composition, trends, legislation, the current global situation, the possibilities for moving towards a circular economy, lifecycle options, treatment methods, and opportunities for re-use, recycling and recovery. Subsequent sections of the book focus on specific technologies that enable the utilization of waste tires in the development of high value materials and advanced applications. Finally, the future of tire recycling is considered. This is an essential resource for scientists, R&D professionals, engineers and manufacturers working in the tire, rubber, waste, recycling, automotive and aerospace industries. In academia, the book will be of interest to researchers and advanced scientists across rubber science, polymer science, materials engineering, environmental science, chemistry and chemical engineering. - Offers systematic coverage of tire recycling, covering composition, lifecycle, processing options, material developments and latest technologies - Explains end-of-life-options in detail, considering approaches and methods for reduction, re-use, recycling and recovery - Explores key application and product areas for recycled tire materials, from civil engineering, sports and leisure, to roads and transport, construction, automotive, and many more

Download or read book Thermoplastic Elastomers from Rubber plastic Blends written by S. K. De and published by Prentice Hall. This book was released on 1990 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: