Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Seals and Sealing Handbook written by Ronald Horace Warring and published by . This book was released on 1981 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Seals and Sealing Handbook written by Robert K. Flitney and published by Elsevier. This book was released on 2014-06-13 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seals and Sealing Handbook, Sixth Edition provides comprehensive coverage of sealing technology, bringing together information on all aspects of this area to enable you to make the right sealing choice. This includes detailed coverage on the seals applicable to static, rotary and reciprocating applications, the best materials to use in your sealing systems, and the legislature and regulations that may impact your sealing choices.Updated in line with current trends this updated reference provides the theory necessary for you to select the most appropriate seals for the job and with its 'Failure Guide', the factors to consider should anything go wrong. Building on the practical, stepped approach of its predecessor, Seals and Sealing Handbook, 6th Edition remains an essential reference for any engineer or designer who uses seals in their work. - A comprehensive reference covering a broad range of seal types for all situations, to ensure that you are able to select the most appropriate seal for any given task - Includes supporting case studies and a unique 'Failure Guide' to help you troubleshoot if things go wrong - New edition includes the most up-to-date information on sealing technology, making it an essential reference for anyone who uses seals in their work

Download or read book Digitization in Dentistry written by Priyanka Jain and published by Springer Nature. This book was released on 2021-03-22 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides evidence-based guidance on the clinical applications of digital dentistry, that is, the use of dental technologies or devices that incorporate digital or computer-controlled components for the performance of dental procedures. Readers will find practically oriented information on the digital procedures currently in use in various fields of dental practice, including, for example, diagnosis and treatment planning, oral radiography, endodontics, orthodontics, implant dentistry, and esthetic dentistry. The aim is to equip practitioners with the knowledge required in order to enhance their daily practice. To this end, a problem-solving approach is adopted, with emphasis on key concepts and presentation of details in a sequential and easy to follow manner. Clear recommendations are set out, and helpful tips and tricks are highlighted. The book is written in a very readable style and is richly illustrated. Whenever appropriate, information is presented in tabular form to provide a ready overview of answers to frequent doubts and questions.

Download or read book Polymer POSS Nanocomposites and Hybrid Materials written by Susheel Kalia and published by Springer. This book was released on 2018-11-27 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of polymer nanocomposites and hybrid materials with polyhedral oligomeric silsesquioxanes (POSS). Among inorganic nanoparticles, functionalized POSS are unique nano-building blocks that can be used to create a wide variety of hybrid and composite materials, where precise control of nanostructures and properties is required. This book describes the influence of incorporation of POSS moieties into (organic) polymer matrices on the mechanical, thermal and flammability behavior of composites and hybrid organic-inorganic materials. Importantly, POSS-containing materials can be bio-functionalized by linking e.g. peptides and growth factors through appropriate surface modification in order to enhance the haemo-compatibility of cardiovascular devices made of these materials. This volume includes descriptions of synthesis routes of POSS and POSS-containing polymeric materials (e.g. based on polyolefines, epoxy resins and polyurethanes), presentation of POSS’ role as flame retardants and as biocompatible linker, as well as the depiction of decomposition and ageing processes.

Download or read book Accessories for HV and EHV Extruded Cables written by Pierre Argaut and published by Springer. This book was released on 2021-05-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This CIGRE Green book on accessories for HV and EHV extruded cables covers relevant issues in cable system design, cable design, submarine cables including off shore generation connection. It provides comprehensive and unbiased information, essential recommendations and guidelines for design, installation, testing and maintenance of accessories to professionals through the exceptional expertise of the authors. This publication is divided in two Volumes covering land and submarine applications, HVAC and HVDC systems, transitions from lapped cable systems to extruded cable systems, from OHL to UG cables and from cables to substations. It equips the reader with recommendations for testing, installation, maintenance, remaining life management. This Volume is dedicated to Components while Volume 2 deals with Land and Submarine AC/DC Applications. The book compiles the results of the work achieved by several Working Groups and Task Forces of CIGRE Study Committee 21/B1, and Joint Working Groups and Joint Task Forces with other Study Committees. Many experts from Study Committees 21/B1 (Insulated Cables), 15/D1 (Materials and Emerging Test Techniques), 33/B3 (Substations), C3 (System Environmental Performance) and C4 (System Technical Performance) have participated in this work in the last 30 years in order to offer comprehensive, continuous and consistent outputs.

Download or read book Technology of Fluoropolymers written by Jiri George Drobny and published by CRC Press. This book was released on 2008-09-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and updated, this second edition continues to provide industrial chemists, technologists, and engineers with the most accurate, compact, and practical source on fluoropolymers (such as Teflon). Highlighting new industrial, military, medical, and consumer goods applications, this edition adds more detailed information on equipment and

Download or read book Synthetic Rubbers Their Chemistry and Technology written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.

Download or read book Automotive Tribology written by and published by . This book was released on 2019 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive study of all important aspects of tribology. It covers issues and their remedies adopted by researchers working on automobile systems. The book is broadly divided in to three sections, viz. (i) new materials for automotive applications, (ii) new lubricants for automotive applications, and (iii) impact of surface morphologies for automotive applications. The rationale for this division is to provide a comprehensive and categorical review of the developments in automotive tribology. The book covers tribological aspects of engines, and also discusses influence of new materials, such as natural fibers, metal foam materials, natural fiber reinforced polymer composites, carbon fiber/silicon nitride polymer composites and aluminium matrix composites. The book also looks at grease lubrication, effectiveness and sustainability of solid/liquid additives in lubrication, and usage of biolubricants. In the last section the book focuses on brake pad materials, shot peening method, surface texturing, magnetic rheological fluid for smart automobile brake and clutch systems, and application of tribology in automobile systems. This book will be of interest to students, researchers, and professionals from the automotive industry.

Download or read book Micromechanics of Composite Materials written by Jacob Aboudi and published by Butterworth-Heinemann. This book was released on 2013 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Summary: A Generalized Multiscale Analysis Approach brings together comprehensive background information on the multiscale nature of the composite, constituent material behaviour, damage models and key techniques for multiscale modelling, as well as presenting the findings and methods, developed over a lifetime's research, of three leading experts in the field. The unified approach presented in the book for conducting multiscale analysis and design of conventional and smart composite materials is also applicable for structures with complete linear and nonlinear material behavior, with numerous applications provided to illustrate use. Modeling composite behaviour is a key challenge in research and industry; when done efficiently and reliably it can save money, decrease time to market with new innovations and prevent component failure.

Download or read book Power Supply Projects written by Maplin and published by Newnes. This book was released on 2013-10-22 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using circuit diagrams, PCB layouts, parts lists and clear construction and installation details, this book provides everything someone with a basic knowledge of electronics needs to know in order to put that knowledge into practice.This latest collection of Maplin projects are a variety of power supply projects, the necessary components for which are readily available from the Maplin catalogue or any of their high street shops. Projects include, laboratory power supply projects for which there are a wide range of applications for the hobbyist, from servicing portable audio and video equipment to charging batteries; and miscellaneous projects such as a split charge unit for use in cars or similar vehicles when an auxiliary battery is used to power 12v accessories in a caravan or trailer. Both useful and innovative, these projects are above all practical and affordable.

Download or read book Textiles written by Ahmed EL Nemr and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiber is a class of materials that are continuous filaments or are in discrete elongated pieces, similar to lengths of thread. Fibers are very important in the biology of both plants and animals for holding tissues together. Plants yielding fibers have been only second to food plants in their usefulness to humans and their influence on the furthering of civilization. Textiles stand next to agriculture as an income generation activity for most of the rural population. The structure of the fabric is as much a determining factor in its functions, as it is the choice of raw material. Some structures of the fabric lend themselves to any specific end use where as many other structures are versatile lending them to a variety of functions and end users. Good understandings of simple woven structures make it possible to apply them in the woven cloth in a variety of ways. This book discussed recent studies in different branches of textile research.

Download or read book Modern Fluoropolymers written by John Scheirs and published by John Wiley & Sons. This book was released on 1997-09-09 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last 25 years have seen the introduction of numerous new fluoropolymers and fluoroelastomers and these developments have widened considerably the scope and applications of fluorine-containing polymers. Modern Fluoropolymers provides an overview of a comprehensive range of commercial fluoropolymers with an emphasis on structure/property behaviour and their diverse fields of application Topics covered include: crystalline and amorphous fluoropolymers, fluoroelastomers, coatings, sealants, linings, electrical properties, surface properties, effects of radiation, chemical resistance and failure modes of fluoropolymers. With chapters written by experts from industry and academia from North America, Europe, Japan, Australia and Russia, the book is truly international in scope and will be welcomed by researchers, processors and users of all types of fluoropolymers.

Download or read book A History of William Osler s The Principles and Practice of Medicine written by Richard L. Golden and published by . This book was released on 2004 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Functionalization of Graphene written by Vasilios Georgakilas and published by John Wiley & Sons. This book was released on 2014-04-03 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: All set to become the standard reference on the topic, this book covers the most important procedures for chemical functionalization, making it an indispensable resource for all chemists, physicists, materials scientists and engineers entering or already working in the field. Expert authors share their knowledge on a wide range of different functional groups, including organic functional groups, hydrogen, halogen, nanoparticles and polymers.

Download or read book Nanocomposite Materials written by Erich Kny and published by Trans Tech Publications Ltd. This book was released on 2009-04-16 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from 2008 EMRS Symposium F: Nanocomposite materials in Warsaw in September 2008

Download or read book Critical Mass written by Chuck Brown and published by . This book was released on 2014-05-27 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Must Read for anyone who works with young single adults, ages 18-30. Starting with a membership of thirty five, a congregation of LDS young singles in Albuquerque, New Mexico, grew to 220, was divided, and then grew again to more than 180 in just over four years. During that time 83 couples met each other, dated, and married. Chuck Brown and his two assistants, David Hardy and Jay Cobb, together with their wives directed this incredible process. If you've ever wondered how to communicate more effectively with young singles, motivate them to participate in your group and influence them to change their lives in positive ways, this book is for you. The key to their success was coming to know and embrace a principal called Critical Mass!