Download or read book Rubber Analysis written by M. J. Forrest and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review outlines each technique used in rubber analysis and then illustrates which methods are applied to determine which facts. This d104 is a good introduction to a very complex subject area and will enable the reader to understand the basic concepts of rubber analysis. Around 350 abstracts from the Rapra Polymer Library database accompany this review, to facilitate further reading. These include core original references together with abstracts from some of the latest papers on rubber analysis.

Download or read book Rubber Analysis written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-04-01 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber analysis plays a vital part in ensuring that manufactured products are fit for purpose. This comprehensive, application-based book with up-to-date referencing covers all important applications and subject area associated with the analysis of rubber compounds and rubber products. Includes characterization of rubber polymers, rubber fumes, identification of extractables and leachables, as well as reverse engineering on compounded products.

Download or read book Databook of Nucleating Agents written by George Wypych and published by Elsevier. This book was released on 2021-01-20 with total page 387 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Nucleating Agents, Second Edition gives engineers and materials scientists the information they need to increase the production rate, modify structure and morphology, and reduce the haze of polymeric products through proper selection of nucleating and clarifying agents. Chemical origin and related properties of nucleating agents are analyzed in general terms to highlight the differences in their properties, including the essential theoretical knowledge required for correct selection and use of nucleating and clarifying agents. This includes methods of chemical modification of nucleating agents and their deposition on suitable substrates, methods and results of dispersion of nucleating agents, influence of their concentration and cooling rate on final result and rate of crystallization, nucleation efficiency of different products and the reasons behind it, and generally accepted mechanisms of nucleation. The book also covers application aspects in different formulations. Patent literature and research papers are extensively reviewed for different applications, and polymer processing methods which require the use of nucleating agents are discussed, with an emphasis on the intricacies of using nucleating agents in different polymers and products. - Provides key information for increasing production rates, modifying structures and morphologies, and reducing haze in polymeric products - Analyzes chemical origin and related properties of widely-used nucleating agents - Includes essential theoretical knowledge required for correct selection and use of nucleating and clarifying agents - Outlines methods of chemical modification of nucleating agents and their deposition on suitable substrates

Download or read book Databook of Rheological Additives written by Anna Wypych and published by Elsevier. This book was released on 2022-03-15 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rheological additives are commonly applied in a wide range of industries and this databook provides readers with information on over 300 organic and inorganic additives. This information is presented in individual tables tor each product, whether commercial or generic. The data are divided into five groups, those being General Information, Physical Properties, Health and Safety, Ecological Properties, and Use & Performance. The following information is included in each section:General Information: name, CAS #, EC #, IUPAC name, common name, common synonyms, acronym, biobased, cellulose functionality, charge, degree of substitution, empirical formula, chemical structure, molecular mass, RTECS number, chemical category, product class, product composition, moisture content, and solids content.Physical Properties: state, odor, color, bulk density, density, specific gravity, relative density, boiling point, melting point, pour point, decomposition temperature, glass transition temperature, refractive index, vapor pressure, vapor density, volume resistivity, relative permittivity, ash content, pH, viscosity, rheological behavior, absolute viscosity, surface tension, hydration time, solubility in solvents, solubility in water, the heat of combustion, the heat of decomposition, specific heat, thermal conductivity, Henry's law constant, particle size, and volatility.Health & Safety: NFPA classification, HMIS classification, OSHA hazard class, UN Risk phrases, UN Safety phrases, UN/NA class, DOT class, ADR/RIC class, ICAO/IATA class, IMDG class, packaging group, shipping name, food approvals, autoignition temperature, self-accelerating decomposition temperature, flash point, TLV ACGIH, NIOSH and OSHA, maximum exposure concentration IDLH, animal testing oral-rat, rabbit-dermal, mouse-oral, guinea pig-dermal, rat-dermal, rat-inhalation, mouse-inhalation, ingestion, skin irritation, eye irritation, inhalation, first aid eye, skin, and inhalation, carcinogenicity IARC, NTP, OSHA, ACGIH, and mutagenicity.Ecological Properties: biological oxygen demand, chemical oxygen demand, theoretical oxygen demand, biodegradation probability, aquatic toxicity algae, Rainbow trout, Sheepshead minnow, Fathead minnow, and Daphnia magna, and partition coefficient.Use & Performance: manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, compatibility, limitations, a typical reason for use, processing methods, the concentration used, storage temperature, and food approval. - Provides readers with information on over 300 organic and inorganic additives, presented in individual tables tor each product - Data featured are divided into five groups: General Information, Physical Properties, Health and Safety, Ecological Properties, and Use & Performance Information highlighted for each additive includes name/common name, chemical structure, state, odor, color, boiling/melting points, rheological behavior, OSHA hazard class, ingestion, skin/eye irritation, first aid, carcinogenicity, biodegradation probability, manufacturer, product feature, recommended for polymers, recommended for products, outstanding properties, compatibility, limitations, a typical reason for use, processing methods, storage temperature, and food approval

Download or read book Pore Structure of Cement Based Materials written by Kalliopi K. Aligizaki and published by CRC Press. This book was released on 2005-09-22 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pore Structure of Cement-Based Materials provides a thorough treatment of the experimental techniques used to characterize the pore structure of materials. The text presents the principles and practical applications of the techniques used, organized in an easy-to-follow and uncomplicated manner, providing the theoretical background, the way to analyze experimental data, and the factors affecting the results. The book is the single comprehensive source of the techniques most commonly used for pore structure analysis, covering simple techniques like mercury intrusion porosimetry and water absorption, to the more sophisticated small-angle scattering and nuclear magnetic resonance. The book is an essential reference text for researchers, users, and students in materials science, applied physics, and civil engineering, who seek a deep understanding of the principles and limitations of the techniques used for pore structure analysis of cement-based materials.

Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2007 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Databook of Impact Modifiers written by George Wypych and published by Elsevier. This book was released on 2022-03-12 with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt: Databook of Impact Modifiers provides key information on how to modify structure and morphology, improve mechanical performance, and prevent changes during the use of polymeric products through proper selection of impact modifiers. The book brings analyses of important publications found in open and patent literature, with special attention given to recent findings that have brought many new essential developments. Sections cover an analysis of chemical origin and related properties of impact modifiers, which are analyzed in general terms to highlight the differences in their properties. This handbook contains the essential theoretical knowledge required for proper selection and use of impact modifiers, including their morphological structure and distribution in a polymer matrix, the effect of polymer crystallization in the presence of and without impact modifiers, important influences on impact modification, mechanisms of modification, and effective methods of incorporation of impact modifiers. - Outlines strategies for modifying the structure and improving the mechanical properties of polymeric products through proper application of impact modifiers - Provides detailed information on impact modifiers, including their morphological structure and distribution in a polymer matrix, the effects of polymer crystallization with and without impact modifiers, influences on impact modification, the mechanisms of modification, and more - Includes analytical techniques, heath and safety and environmental considerations, and processing methods

Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2005 with total page 866 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kwic Index of International Standards written by International Organization for Standardization and published by Geneva : ISO/IEC. This book was released on 1991 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors’ products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts, Tools, and Techniques explains the principles and science behind rubber formulation development by reverse engineering methods. The book describes the tools and analytical techniques used to discover which materials and processes were used to produce a particular vulcanized rubber compound from a combination of raw rubber, chemicals, and pigments. A Compendium of Chemical, Analytical, and Physical Test Methods Organized into five chapters, the book first reviews the construction of compounding ingredients and formulations, from elastomers, fillers, and protective agents to vulcanizing chemicals and processing aids. It then discusses chemical and analytical methods, including infrared spectroscopy, thermal analysis, chromatography, and microscopy. It also examines physical test methods for visco-elastic behavior, heat aging, hardness, and other features. A chapter presents important reverse engineering concepts. In addition, the book includes a wide variety of case studies of formula reconstruction, covering large products such as tires and belts as well as smaller products like seals and hoses. Get Practical Insights on Reverse Engineering from the Book’s Case Studies Combining scientific principles and practical advice, this book brings together helpful insights on reverse engineering in the rubber industry. It is an invaluable reference for scientists, engineers, and researchers who want to produce comparative benchmark information, discover formulations used throughout the industry, improve product performance, and shorten the product development cycle.

Download or read book Characterization of Porous Solids and Powders Surface Area Pore Size and Density written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-09-14 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth of interest in newly developed porous materials has prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. One might consider this new book as the 4th edition of "Powder Surface Area and Porosity" (Lowell & Shields), but for this new edition we set out to incorporate recent developments in the understanding of fluids in many types of porous materials, not just powders. Based on this, we felt that it would be prudent to change the title to "Characterization of Porous Solids and Powders: Surface Area, Porosity and Density". This book gives a unique overview of principles associated with the characterization of solids with regard to their surface area, pore size, pore volume and density. It covers methods based on gas adsorption (both physi and chemisorption), mercury porosimetry and pycnometry. Not only are the theoretical and experimental basics of these techniques presented in detail but also, in light of the tremendous progress made in recent years in materials science and nanotechnology, the most recent developments are described. In particular, the application of classical theories and methods for pore size analysis are contrasted with the most advanced microscopic theories based on statistical mechanics (e.g. Density Functional Theory and Molecular Simulation). The characterization of heterogeneous catalysts is more prominent than in earlier editions; the sections on mercury porosimetry and particularly chemisorption have been updated and greatly expanded.

Download or read book Canadian Chemistry and Process Industries written by and published by . This book was released on 1939 with total page 2036 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Compounding Precipitated Silica in Elastomers written by Norman Hewitt and published by William Andrew. This book was released on 2007-04-24 with total page 603 pages. Available in PDF, EPUB and Kindle. Book excerpt: This valuable guide to compounding elastomers with precipitated silica covers principles, properties, mixing, testing and formulations from a practical perspective. This handbook and reference manual will serve those who work on part design, elastomer formulation, manufacturing and applications of elastomers. Ample discussion of compound specifications adds to the usefulness of this book to practitioners. Comparisons of carbon black and silica compounds throughout the book allow readers to select the most suitable formulation for applications ranging from tires to electrical insulation to shoe soles. The author has over forty years of experience in the rubber industry highlighted by his 39 years at the PPG Rubber Research laboratories. A highlight of the book is the inclusion of studies conducted by the author which greatly adds to the richness of the contents.

Download or read book Reinforcement of Rubber written by Shinzo Kohjiya and published by Springer Nature. This book was released on 2020-04-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most recent description of rubber reinforcement, focusing on the network-like structure formation of nanofiller in the rubber matrix under the presence of bound rubber. The resultant filler network is visualized by electron tomography applied to rubber. In the case of natural rubber, the self-reinforcement effect is uniquely functioning, and new template crystallization is suggested. Here, the crystallites are also believed to arrange themselves in a network-like manner. These results are of great use, particularly for engineers, in designing rubber reinforcement.

Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.

Download or read book The Rubber Formulary written by Peter A. Ciullo and published by William Andrew. This book was released on 1999-12-31 with total page 767 pages. Available in PDF, EPUB and Kindle. Book excerpt: A stable usage of rubber compounds in the production of components for almost every industry has created the need for this handbook and formulary. Convenience is the primary reason for such a book. With the variety of uses for rubber being as broad as the imagination, a formulary which includes an overview of the history of rubber, as well as sections on ingredients, processing methods, and testing, is a welcome addition to any manufacturer's library. Rubber products include seals and gaskets for windows, pressure and vacuum hoses for automotive and aerospace applications, bottle stoppers for medical and pharmaceutical products, center cores for all types of balls, belts for tools and machinery, shock and vibration absorbers for everything from motor mounts to sky scrapers, insulation for blankets, and even large film coatings for roofing applications. Additional industrial and consumer products are being designed out of rubber compounds every day.Whether you are involved with selling raw materials, producing rubber compounds, or designing rubber components and products, Rubber Formulary is the right sourcebook of data for your needs. This first-ever collection of 500 suggested formulas has been provided by raw materials suppliers around the world. Written for both technical and managerial personnel, this collection of formulas and basic texts will also benefit students and other individuals just entering the field.

Download or read book Mechanics of Pneumatic Tires written by Samuel K. Clark and published by . This book was released on 1981 with total page 942 pages. Available in PDF, EPUB and Kindle. Book excerpt: