Download or read book Practical Guide to Rock Tunneling written by Dean Brox and published by CRC Press. This book was released on 2017-04-11 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide to Rock Tunneling fills an important void in the literature for a practical guide to the design and construction of tunnels in rock. Practical Guide to Rock Tunneling takes the reader through all the critical steps of the design and construction for rock tunnels starting from geotechnical site investigations through to construction supervision. The guide provides suggestions and recommendations for practitioners on special topics of laboratory testing, durability of rock and acceptance for unlined water conveyance tunnels, overstressing or deep and long tunnels, risk-based evaluation of excavation methods, contract strategies, and post-construction inspections. Key considerations and lessons learned from selected case projects are presented based on the author’s extensive international experience of over 30 years and 1000 km of tunneling for civil, hydropower, and mining infrastructure, including some of the most recognized projects in the world to date. Instead of revisiting all theory and concepts that can be found in other sources, this book contains the hard learned lessons from the author’s experience in the field of Rock Tunneling, gathered over 30 years of service.
Download or read book Tunneling in Rock written by Ernest Wahlstrom and published by Elsevier. This book was released on 2012-12-02 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunneling in Rock reviews the theory and practice of engineering geology and its application to tunneling in rocks. This book explores the history of tunneling, defines terminologies of tunneling, and illustrates tunnels. The book discusses the petrography of unaltered rocks, such as rock minerals, fragmental rocks, igneous rocks, sedimentary rocks and metamorphic rocks. The book then describes rock alteration, which may be caused by weathering. Such alterations are low-temperature alterations at moderate depths, hydrothermal alteration, deuteric alteration, pneumatolytic alteration, and other miscellaneous types of alteration. The book also discusses elementary rock mechanics, such as isotropism and anisotropism; mechanical properties of rocks; force and stress; and the fracture and fold anisotropy in rocks, including the deformation of minerals, elastic, quasi-elastic, and plastic rocks. The remaining chapters of the book focus on hydrogeology; geological investigation of proposed tunnel locations and its application to tunnel planning and design; different tunneling methods; and geological investigations during tunnel constructions. Those who are interested in geological aspects of planning and constructing tunnels will find this book valuable.
Download or read book Tunnels and Shafts in Rock written by United States. Army. Corps of Engineers and published by . This book was released on 1978 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tunnelling in Weak Rocks written by Bhawani Singh and published by Elsevier. This book was released on 2011-08-29 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vast knowledge has been developed in the area of tunnelling in weak rocks over the years, and this book bridges an important gap by bringing all the information together for the benefit of the tunnelling Industry. In particular, tunnelling in poor conditions is a huge challenge for engineers and designers, and this book tackles all typical problems headon. Topics covered include classification approach, design approaches for site-specific grounds, a new invention on shielded tunnel boring machine, case histories, tunnel mechanics, risk engineering and management culture. Based on extensive field research experiences in Himalayan region and Alps Exclusive chapters on tunnelling hazards, squeezing ground conditions (a full detailed case study), swelling ground conditions, critical state rock mechanics, etc. Supported by over 180 figures and 90 tables of data, and test examples (with solutions)
Download or read book Tunneling in Rock by Drilling and Blasting written by Alex Spathis and published by CRC Press. This book was released on 2012-11-05 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling in Rock by Drilling and Blasting presents the latest developments in the excavation of tunnels using the drilling and blasting method. Examples of work conducted throughout the world including the Indian sub-continent, Australia, and Sweden amongst others are discussed. These tunnel projects serve to illustrate the challenges and i
Download or read book Rock Tunnel Methods written by Hercules Powder Company and published by . This book was released on 1931 with total page 94 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Guide to Rock Tunneling written by Dean Brox and published by CRC Press. This book was released on 2017-04-11 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Practical Guide to Rock Tunneling fills an important void in the literature for a practical guide to the design and construction of tunnels in rock. Practical Guide to Rock Tunneling takes the reader through all the critical steps of the design and construction for rock tunnels starting from geotechnical site investigations through to construction supervision. The guide provides suggestions and recommendations for practitioners on special topics of laboratory testing, durability of rock and acceptance for unlined water conveyance tunnels, overstressing or deep and long tunnels, risk-based evaluation of excavation methods, contract strategies, and post-construction inspections. Key considerations and lessons learned from selected case projects are presented based on the author’s extensive international experience of over 30 years and 1000 km of tunneling for civil, hydropower, and mining infrastructure, including some of the most recognized projects in the world to date. Instead of revisiting all theory and concepts that can be found in other sources, this book contains the hard learned lessons from the author’s experience in the field of Rock Tunneling, gathered over 30 years of service.
Download or read book Tunnel Design Methods written by Antonio Bobet and published by CRC Press. This book was released on 2023-09-12 with total page 893 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnel Design Methods covers analytical, numerical, and empirical methods for the design of tunnels in soil and in rock. The material is intended for design engineers looking for detailed methods, for graduate students who are interested in tunnelling, and for researchers working on various aspects of ground-support interaction under static and seismic loading. The book is divided into seven chapters, covering fundamental concepts on ground and support behavior and on ground-excavation-support interaction and provides detailed information on analytical and numerical methods used for the design of tunnels, with applications, and on the latest developments on empirical methods. The principles and formulations included are used, throughout the book, to provide insight into the response of tunnels under both simple and complex loading conditions, thus providing the reader with fundamental understanding of tunnel behavior. Both authors have experience in tunnelling and have worked extensively in practice, designing tunnels both in the United States and abroad, and in research.
Download or read book Enhancements Emerging Systems and Construction Methods in Rock Tunneling written by and published by . This book was released on 1985 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book TBM Tunnelling in Jointed and Faulted Rock written by Nick R. Barton and published by CRC Press. This book was released on 2000-01-01 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical guide describes the stage-by-stage development of a method for predicting the penetration rate (PR) and the advance rate (AR) for tunnel boring machines based on an expanded version of the Q-value, QTBM. The author analyzes 145 TBM tunnels that total 1,000km in length. He then develops simple formulae to estimate PR and AR from the QTBM value and to back-calculate QTBM from performance data. The book quantitatively explains actual advance rates as high as five m/hr for one day or as low as 0.005 m/hr for several months. It also covers logging methods, empirical TBM tunnel support design, and numerical verification of support.
Download or read book Support of Underground Excavations in Hard Rock written by E. Hoek and published by CRC Press. This book was released on 2000-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The safe and economical construction of tunnels, mines, and other subterranean works depends on the correct choice of support systems to ensure that the excavations are stable. These support systems should be matched to the characterstics of the rock mass and the excavation techniques adopted. Establishing the support requirements, designing support systems and installing these correctly are essential elements in safe underground construction. This is a comprehensive and practical work which also gives access to user-friendly computer programmes which enable the investigation and design of support techniques. Details on how to obtain this software are also included in the book.
Download or read book Tunnels and Shafts in Rock written by U. S. Army Corps of Engineers and published by . This book was released on 2005 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual was prepared by the U.S. Army Corps of Engineers and provides technical criteria and guidance for the planning, design, and construction of tunnels and shafts in rock for civil works projects. Specific areas covered include geological and geotechnical explorations required, construction of tunnels and shafts, design considerations, geomechanical analysis, design of linings, and instrumentation and monitoring. The manual emphasizes design, construction and an understanding of the methods, and conditions of construction essential to the preparation of good designs.
Download or read book Hardrock Tunnel Boring Machines written by Bernhard Maidl and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of tunneling machine technology: drilling, tunneling, waste removal and securing. It treats methods of rock classification for the machinery concerned as well as legal issues, using numerous example projects to reflect the state of technology, as well as problematic cases and solutions. The work is structured such that readers are led from the basics via the main functional elements of tunneling machinery to the different types of machine, together with their areas of application and equipment. The result is an overview of current developments. Close cooperation among the authors involved has created a book of equal interest to experienced tunnelers and newcomers.
Download or read book Soft Ground Tunnel Design written by Benoit Jones and published by CRC Press. This book was released on 2021-11-16 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Soft Ground Tunnel Design is a textbook that teaches the principles of tunnel and underground space design in soft ground. ‘Soft ground’ refers to soil, in contrast to rock. The book focuses on stability, prediction of ground movements and structural design of the lining. It shows that the choice of excavation and support methods depends on ground stability; limitation of damage to the existing built environment; and health, safety and environmental considerations. Author Benoît Jones builds on the basic principles of soil-structure interaction, the three-dimensional effects of construction sequence and the effects of construction on other surface or subsurface structures in steps of gradually increasing complexity. The use of worked examples throughout, and example problems at the end of each chapter, gives the reader confidence to apply their knowledge. Engineers and graduate students will be able to: • Understand the complex soil-structure interaction around an advancing tunnel. • Calculate heading stability. • Understand the basis for choosing an underground construction method and/or ground improvement method. • Design tunnel linings in soft ground using a variety of methods. • Predict ground movements. • Predict the effects of construction on the built environment and assess potential damage. Benoît Jones has worked in tunnelling as a designer, contractor and academic for more than 20 years. He set up and ran the MSc Tunnelling and Underground Space course at the University of Warwick. He is now managing director of his own company, Inbye Engineering.
Download or read book Rock Tunneling with Steel Supports written by Robert Videtto Proctor and published by . This book was released on 1977 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Tunnel Construction written by Gary B. Hemphill and published by John Wiley & Sons. This book was released on 2012-10-05 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: The only modern guide to all aspects of practical tunnel construction Practical Tunnel Construction fills a void in the literature for a practical guide to tunnel construction. By taking the reader through a brief introduction and history to a comprehensive discussion of how the geological factors affect tunneling, the author covers the stages and technology that are common today without using complex equations. Written for the individual who does not have an extensive background in tunneling but who has to make tunneling decisions, the various tunneling methods are discussed to help in the determination of the appropriate method. The methods discussed are: hand mining, drill/blast, Tunnel Boring Machine (TBM), New Austrian Tunnelling Method (NATM), Norwegian Method of Tunnelling (NMT), Roadheader, Earth Pressure Balance Machine (EPBM), and Slurry Pressure Balance Machine (SPBM). This book focuses on driven tunnels. This versatile handbook: Offers clear and accessible coverage of the state of the art in tunnel construction Introduces the essentials of design and construction of many types of tunnels, including TBM, EPB, Roadheader, NATM, drill and blast, and soft ground tunneling Provides nontechnical guidance on selecting the most appropriate tunneling methods for various situations Includes a brief history of tunneling and an introduction to geotechnical considerations Discusses tunnel access shaft construction, mucking methods, tunnel haulage, grout, water handling, and much more Practical Tunnel Construction is an important resource for students, construction managers, tunnel designers, municipal engineers, or engineers who are employed by government agencies or corporations that are exploring the feasibility of planning and designing or building a tunnel.
Download or read book Introduction to Tunnel Construction written by David Chapman and published by CRC Press. This book was released on 2017-11-27 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tunnelling provides a robust solution to a variety of engineering challenges. It is a complex process, which requires a firm understanding of the ground conditions as well as the importance of ground-structure interaction. This book covers the full range of areas related to tunnel construction required to embark upon a career in tunnelling. It also includes a number of case studies related to real tunnel projects, to demonstrate how the theory applies in practice. New features of this second edition include: the introduction of a case study related to Crossrail’s project in London, focussing on the Whitechapel and Liverpool Street station tunnels and including considerations of building tunnels in a congested urban area; and further information on recent developments in tunnel boring machines, including further examples of all the different types of machine as well as multi-mode machines. The coverage includes: Both hard-rock and soft-ground conditions Site investigation, parameter selection, and design considerations Methods of improving the stability of the ground and lining techniques Descriptions of the various main tunnelling techniques Health and safety considerations Monitoring of tunnels during construction Description of the latest tunnel boring machines Case studies with real examples, including Crossrail’s project in London Clear, concise, and heavily illustrated, this is a vital text for final-year undergraduate and MSc students and an invaluable starting point for young professionals and novices in tunnelling.
