Download or read book Rock Classification Systems for Engineering Purposes written by Louis Kirkaldie and published by ASTM International. This book was released on 1988 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Rock Mass Classification written by R K Goel and published by Elsevier. This book was released on 2011-08-09 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock mass classification methods are commonly used at the preliminary design stages of a construction project when there is very little information. It forms the bases for design and estimation of the required amount and type of rock support and groundwater control measures. Encompassing nearly all aspects of rock mass classifications in detail, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers and managers with extensive practical knowledge which is time-tested in the projects in Himalaya and other parts of the world in complex geological conditions. Rock mass classification is an essential element of feasibility studies for any near surface construction project prior to any excavation or disturbances made to earth. Written by an author team with over 50 years of experience in some of the most difficult mining regions of the world, Civil Engineering Rock Mass Classification: Tunnelling, Foundations and Landsides provides construction engineers, construction managers and mining engineers with the tools and methods to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. The goal is to use effective mapping techniques to obtain data can be used as input for any of the established rock classification systems. The book covers all of the commonly used classification methods including: Barton's Q and Q' systems, Bieniawski's RMR, Laubscher's MRMR and Hoek's and GSI systems. With this book in hand, engineers will be able to gather geotechnical data, either from rock cuts, drifts or core, and process the information for subsequent analysis. Rich with international case studies and worked out equations, the focus of the book is on the practical gathering information for purposes of analysis and design. - Identify the most significant parameters influencing the behaviour of a rock mass - Divide a particular rock mass formulation into groups of similar behaviour, rock mass classes of varying quality - Provide a basis of understanding the characteristics of each rock mass class - Relate the experience of rock conditions at one site to the conditions and experience encountered at others - Derive quantitative data and guidelines for engineering design - Provide common basis for communication between engineers and geologists
Download or read book Engineering Rock Mass Classifications written by Z. T. Bieniawski and published by John Wiley & Sons. This book was released on 1989-08-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first authoritative reference on rock mass classification, consolidating into one handy source information once widely scattered throughout the literature. It includes new, previously unpublished material and case histories, presents the fundamental concepts of classification schemes, and critically appraises their practical application in industrial projects such as tunneling and mining.
Download or read book Rock Classification Systems for Engineering Purposes written by Louis Kirkaldie and published by . This book was released on 1988-01-01 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standard Guides for Using Rock Mass Classification Systems for Engineering Purposes written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure written by Andy Afrouz and published by CRC Press. This book was released on 1992-06-10 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical Handbook of Rock Mass Classification Systems and Modes of Ground Failure is a comprehensive, yet concise, guide to 16 of the most important rock classification systems and their failure modes. The book discusses these systems in relation to the design of excavations and ground reinforcement/support under passive, active, static, and dynamic mining conditions. This includes rock testing assessment, surface and underground site investigation, and any practical activity that deals with the physical and mechanical properties of rocks. The book is an excellent professional reference for geoscientists, technicians, and geological engineers doing research and consulting in mining, geological, civil, and petroleum resource fields.
Download or read book Standard Guides for Using Rock Mass Classification Systems for Engineering Purposes Withdrawn 2017 written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rock Engineering written by Arild Palmstrom and published by ICE Publishing. This book was released on 2014-12-19 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Engineering is a valuable reference tool for geotechnical engineers, geologists, consultants, contractors, and advanced students on rock engineering and engineering geology courses.
Download or read book Special Procedures for Testing Soil and Rock for Engineering Purposes written by ASTM Committee D-18 on Soil and Rock for Engineering Purposes and published by . This book was released on 1961 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedia of Engineering Geology written by Peter T. Bobrowsky and published by Springer. This book was released on 2018-08-03 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses the multi-disciplinary topic of engineering geology and the environment, one of the fastest growing, most relevant and applied fields of research and study within the geosciences. It covers the fundamentals of geology and engineering where the two fields overlap and, in addition, highlights specialized topics that address principles, concepts and paradigms of the discipline, including operational terms, materials, tools, techniques and methods as well as processes, procedures and implications. A number of well known and respected international experts contributed to this authoritative volume, thereby ensuring proper geographic representation, professional credibility and reliability. This superb volume provides a dependable and ready source of information on approximately 300 topical entries relevant to all aspects of engineering geology. Extensive illustrations, figures, images, tables and detailed bibliographic citations ensure that the comprehensively defined contributions are broadly and clearly explained. The Encyclopedia of Engineering Geology provides a ready source of reference for several fields of study and practice including civil engineers, geologists, physical geographers, architects, hazards specialists, hydrologists, geotechnicians, geophysicists, geomorphologists, planners, resource explorers, and many others. As a key library reference, this book is an essential technical source for undergraduate and graduate students in their research. Teachers/professors can rely on it as the final authority and the first source of reference on engineering geology related studies as it provides an exceptional resource to train and educate the next generation of practitioners.
Download or read book Engineering Properties of Rocks written by Lianyang Zhang and published by Butterworth-Heinemann. This book was released on 2016-09-06 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: More often than not, it is difficult or even impossible to obtain directly the specific rock parameters of interest using in situ methods. The procedures for measuring most rock properties are also time consuming and expensive. Engineering Properties of Rocks, Second Edition, explores the use of typical values and/or empirical correlations of similar rocks to determine the specific parameters needed. The book is based on the author's extensive experience and offers a single source of information for the evaluation of rock properties. It systematically describes the classification and characterization of intact rock, rock discontinuities, and rock masses, and presents the various indirect methods for estimating the deformability, strength, and permeability of these components as well as the in situ rock stresses. - Presents a single source for the correlations on rock properties - Saves time and resources invested on in situ testing procedures - Fully updated with current literature - Expanded coverage of rock types and geographical locations
Download or read book Rock Mass Classification written by B. Singh and published by Elsevier. This book was released on 1999-05-05 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rock Mass Classifications - A Practical Approach in Civil Engineering was written in response to the many unanswered questions regarding this subject. Questions such as - Is Classification reasonably reliable? Can it be successful in crisis management of geohazards? Can a single Classification system be general for all rock structures? Is Classification a scientific approach? Laborious field research was undertaken in the Himalayan mountains by a team of scientists from the Central Mining Research Institute (CMRI), University of Roorkee (UOR), Central Soil and Material Research Station (CSMRS), U.P. Irrigation Research Institute (UPIRI), and Norwegian Geotechnical Institute (NGI) to answer these questions. The results obtained from the research work were systematically compiled to produce this book which bears particular relevance to civil, mining and petroleum engineers and geologists. Endorsements "It is a Handbook of Rock Engineering" - Zhao Jian, School of Civil & Structural Engineering, Nanyang Technological University, Singapore "I came across your new book - Rock Mass Classification, absolutely fantastic" - Subodh K. Jain, U.S.A
Download or read book Rock Quality Designation RQD After Twenty Years written by Don U. Deere and published by . This book was released on 1989 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Twenty years of experience is now available in the use of the Rock Quality Designation (RQD) in practice. The RQD is an index of rock quality in which a modified core recovery percentage is obtained by counting only pieces of sound core 4-in. (100 mm) or greater in length of NX size or larger core diameters. Experience now indicates both smaller (NQ) and larger core diameters are appropriate; that slightly and moderately weathered core that can not be hand broken be included; that length measurements be made along the center-line or axis of the core piece; and that the requisite length of 4-in. (100 mm) be retained. Problems with core breakage and loss occur in thinly bedded and schistose rocks, and, particularly, with weak argillaceous rock interbedded with harder sandstone or limestone, a problem that can be ameliorated by large diameter cores, shorter coring runs, and by use of the best drilling equipment and techniques. Correlations of RQD with certain engineering parameters are given, but the more recent classification system of Bieniawski or Barton et al, which include the RQD as a parameter, are preferred for estimating the design and construction parameters. For obtaining the RQD, the best drilling techniques and prompt core logging in the field by a qualified engineering geologist or geotechnical engineer should be used. The RQD is not a design parameter that stands alone, but must be used together with an appreciation of the detailed geology and the geotechnical aspects. (FR).
Download or read book Tunnel Design by Rock Mass Classifications written by Z. T. Bieniawski and published by . This book was released on 1979 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Unified Rock Classification System written by Douglas A. Williamson and published by . This book was released on 1988 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Unified Rock Classification System (URCS) makes possible the initial assessment of geotechnical rock conditions in the field by verifiable and reproducible means. The URCS is flexible in regard to the scale and scope of the project. In addition, the URCS provides for further refinement by as much laboratory testing as is required to meet the cost and risk considerations of the project. The URCS defines by simple or refined procedures four fundamental properties: Weathering, Strength, Discontinuity, and Density of rock materials or rock masses for analysis and documentation. To be effective, a rock classification for civil engineering or engineering geology purposes must meet the criteria of Objectivity, Reliability, Validity, Sensitivity, Comparability, and Utility. The URCS was designed to meet these criteria. The system has been used for over 27 years in a wide variety of geotechnical investigations for the design and construction of civil engineering projects. Results have demonstrated that the URCS does meet these criteria.
Download or read book Rock Classification Systems for Engineering Purposes written by Louis Kirkaldie and published by ASTM International. This book was released on 1988 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soft Rock Mechanics and Engineering written by Milton Kanji and published by Springer Nature. This book was released on 2019-11-24 with total page 753 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a practical reference guide to soft rock mechanics for engineers and scientists. Written by recognized experts, it will benefit professionals, contractors, academics, researchers and students working on rock engineering projects in the fields of civil engineering, mining and construction engineering. Soft Rock Mechanics and Engineering covers a specific subject of great relevance in Rock Mechanics – and one that is directly connected to the design of geotechnical structures under difficult ground conditions. The book addresses practical issues related to the geomechanical properties of these types of rock masses and their characterization, while also discussing advances regarding in situ investigation, safety, and monitoring of geotechnical structures in soft rocks. Lastly, it presents important case histories involving tunnelling, dam foundations, coal and open pit mines and landslides.
