Download or read book Robustness in Identification and Control written by M. Milanese and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects most of the papers presented at the International Workshop on Robustness in Identification and Control, held in Torino (Italy) in 1988. The main focal point of the workshop was Unknown But Bounded uncertainty and associated robustness issues in identification and control. Recent years have seen a growing interest in studying models which include un known but bounded uncertainty. The motivation for dealing with such models is derived from robustness considerations. In many applications, some performance specification must be met for all admissible variations of the uncertain parameters. A second motivation for models with this type of uncertainty stems from the fact that the statistical description of uncertain variables may not be well known or even not suitable. For example, in some cases, only a small number of measurements is available and the resulting errors are due to analog-digital conversion, modelling ap proximation or round-off, so that a statistical description may actually be unreliable. The interest in unknown but bounded setting is certainly not new. In fact, en gineering practice demands for appropriate algorithms in dealing with finite sample properties, finite parameter variations, tolerance analysis, etc. Despite the natural need for such methods, the lack of sufficiently well assessed theoretical results and algorithms prevented a systematic use of these procedures until recent years. How ever, in the last few years, important advances have been made both in estimation theory and in stability analysis.
Download or read book Special Issue on Robustness in Identification and Control written by Antonio Vicino and published by . This book was released on 2001 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Essays on Control written by H.L. Trentelman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the text of the plenary lectures and the mini-courses of the European Control Conference (ECC'93) held in Groningen, the Netherlands, June 2S-July 1, 1993. However, the book is not your usu al conference proceedings. Instead, the authors took this occasion to take a broad overview of the field of control and discuss its development both from a theoretical as well as from an engineering perpective. The first essay is by the key-note speaker ofthe conference, A.G.J. Mac Farlane. It consists of a non-technical discussion of information processing and knowledge acquisition as the key features of control engineering tech nology. The next six articles are accounts of the plenary addresses. The contribution by R.W. Brockett concerns a mathematical framework for modelling motion control, a central question in robotics and vision. In the paper by M. Morari the engineering and the economic relevance of chemical process control are considered, in particular statistical quality control and the control of systems with constraints. The article by A.C.P.M. Backx is written from an industrial perspec tive. The author is director of an engineering consulting firm involved in the design of industrial control equipment. Specifically, the possibility of obtaining high performance and reliable controllers by modelling, identifi cation, and optimizing industrial processes is discussed.
Download or read book Process Control written by Jean-Pierre Corriou and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference book can be read at different levels, making it a powerful source of information. It presents most of the aspects of control that can help anyone to have a synthetic view of control theory and possible applications, especially concerning process engineering.
Download or read book Robust and Adaptive Control written by Eugene Lavretsky and published by Springer Science & Business Media. This book was released on 2012-11-13 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust and Adaptive Control shows the reader how to produce consistent and accurate controllers that operate in the presence of uncertainties and unforeseen events. Driven by aerospace applications the focus of the book is primarily on continuous-dynamical systems. The text is a three-part treatment, beginning with robust and optimal linear control methods and moving on to a self-contained presentation of the design and analysis of model reference adaptive control (MRAC) for nonlinear uncertain dynamical systems. Recent extensions and modifications to MRAC design are included, as are guidelines for combining robust optimal and MRAC controllers. Features of the text include: · case studies that demonstrate the benefits of robust and adaptive control for piloted, autonomous and experimental aerial platforms; · detailed background material for each chapter to motivate theoretical developments; · realistic examples and simulation data illustrating key features of the methods described; and · problem solutions for instructors and MATLAB® code provided electronically. The theoretical content and practical applications reported address real-life aerospace problems, being based on numerous transitions of control-theoretic results into operational systems and airborne vehicles that are drawn from the authors’ extensive professional experience with The Boeing Company. The systems covered are challenging, often open-loop unstable, with uncertainties in their dynamics, and thus requiring both persistently reliable control and the ability to track commands either from a pilot or a guidance computer. Readers are assumed to have a basic understanding of root locus, Bode diagrams, and Nyquist plots, as well as linear algebra, ordinary differential equations, and the use of state-space methods in analysis and modeling of dynamical systems. Robust and Adaptive Control is intended to methodically teach senior undergraduate and graduate students how to construct stable and predictable control algorithms for realistic industrial applications. Practicing engineers and academic researchers will also find the book of great instructional value.
Download or read book Adaptive Control written by Shankar Sastry and published by Courier Corporation. This book was released on 2011-01-01 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume surveys the major results and techniques of analysis in the field of adaptive control. Focusing on linear, continuous time, single-input, single-output systems, the authors offer a clear, conceptual presentation of adaptive methods, enabling a critical evaluation of these techniques and suggesting avenues of further development. 1989 edition.
Download or read book Homogeneous Polynomial Forms for Robustness Analysis of Uncertain Systems written by Graziano Chesi and published by Springer Science & Business Media. This book was released on 2009-07-13 with total page 209 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a number of techniques for robustness analysis of uncertain systems. In it, convex relaxations for several robustness problems are derived by exploiting and providing new results on the theory of homogenous polynomial forms.
Download or read book Robust Estimates of Location written by David F. Andrews and published by Princeton University Press. This book was released on 2015-03-08 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because estimation involves inferring information about an unknown quantity on the basis of available data, the selection of an estimator is influenced by its ability to perform well under the conditions that are assumed to underlie the data. Since these conditions are never known exactly, the estimators chosen must be robust; i.e., they must be able to perform well under a variety of underlying conditions. The theory of robust estimation is based on specified properties of specified estimators under specified conditions. This book was written as the result of a study undertaken to establish the interaction of these three components over as large a range as possible. Originally published in 1972. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book System Identification for Robust Control written by Qiang Zhan and published by . This book was released on 2008 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Linear Control Theory written by Shankar P. Bhattacharyya and published by CRC Press. This book was released on 2018-10-03 with total page 679 pages. Available in PDF, EPUB and Kindle. Book excerpt: Successfully classroom-tested at the graduate level, Linear Control Theory: Structure, Robustness, and Optimization covers three major areas of control engineering (PID control, robust control, and optimal control). It provides balanced coverage of elegant mathematical theory and useful engineering-oriented results. The first part of the book develops results relating to the design of PID and first-order controllers for continuous and discrete-time linear systems with possible delays. The second section deals with the robust stability and performance of systems under parametric and unstructured uncertainty. This section describes several elegant and sharp results, such as Kharitonov’s theorem and its extensions, the edge theorem, and the mapping theorem. Focusing on the optimal control of linear systems, the third part discusses the standard theories of the linear quadratic regulator, Hinfinity and l1 optimal control, and associated results. Written by recognized leaders in the field, this book explains how control theory can be applied to the design of real-world systems. It shows that the techniques of three term controllers, along with the results on robust and optimal control, are invaluable to developing and solving research problems in many areas of engineering.
Download or read book Robust Adaptive Control written by Petros Ioannou and published by Courier Corporation. This book was released on 2013-09-26 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt: This tutorial-style presentation of the fundamental techniques and algorithms in adaptive control is designed to meet the needs of a wide audience without sacrificing mathematical depth or rigor. The text explores the design, analysis, and application of a wide variety of algorithms that can be used to manage dynamical systems with unknown parameters. Topics include models for dynamic systems, stability, online parameter estimation, parameter identifiers, model reference adaptive control, adaptive pole placement control, and robust adaptive laws. Engineers and students interested in learning how to design, stimulate, and implement parameter estimators and adaptive control schemes will find that this treatment does not require a full understanding of the analytical and technical proofs. This volume will also serve graduate students who wish to examine the analysis of simple schemes and discover the steps involved in more complex proofs. Advanced students and researchers will find it a guide to the grasp of long and technical proofs. Numerous examples demonstrating design procedures and the techniques of basic analysis enrich the text.
Download or read book Model Predictive Control in the Process Industry written by Eduardo F. Camacho and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control is an important technique used in the process control industries. It has developed considerably in the last few years, because it is the most general way of posing the process control problem in the time domain. The Model Predictive Control formulation integrates optimal control, stochastic control, control of processes with dead time, multivariable control and future references. The finite control horizon makes it possible to handle constraints and non linear processes in general which are frequently found in industry. Focusing on implementation issues for Model Predictive Controllers in industry, it fills the gap between the empirical way practitioners use control algorithms and the sometimes abstractly formulated techniques developed by researchers. The text is firmly based on material from lectures given to senior undergraduate and graduate students and articles written by the authors.
Download or read book Robust Systems Theory and Applications written by Ricardo S. Sánchez-Peña and published by Wiley-Interscience. This book was released on 1998-08-17 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed as a university textbook, this text on robust systems theory includes problems with every chapter, a solutions manual and Matlab files containing worked examples.
Download or read book System Identification for Robust Control Design written by R. L. Kosut and published by . This book was released on 1992 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.
Download or read book Robust System Identification and Control Design written by and published by . This book was released on 2001 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this research project, we have made significant progress in several fronts of modem control technology. Our major research results include: new model identification and validation techniques, new model uncertainty and robustness characterization methods using probabilistic approach, randomized control analysis and design methods, some advanced nonlinear control techniques including bifurcation stabilization and compressor stabilization techniques, model reduction techniques, fault detection and fault tolerant control methods, and several robust stability analysis algorithms.
Download or read book Recent Advances in Robust Control written by Andreas Müller and published by BoD – Books on Demand. This book was released on 2011-11-21 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Robust control has been a topic of active research in the last three decades culminating in H_2/H_\infty and \mu design methods followed by research on parametric robustness, initially motivated by Kharitonov's theorem, the extension to non-linear time delay systems, and other more recent methods. The two volumes of Recent Advances in Robust Control give a selective overview of recent theoretical developments and present selected application examples. The volumes comprise 39 contributions covering various theoretical aspects as well as different application areas. The first volume covers selected problems in the theory of robust control and its application to robotic and electromechanical systems. The second volume is dedicated to special topics in robust control and problem specific solutions. Recent Advances in Robust Control will be a valuable reference for those interested in the recent theoretical advances and for researchers working in the broad field of robotics and mechatronics.
